From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: dts: sun8i-h3: sinovoip-bpi-m2-plus: Fix LED and switch labels
Date: Wed, 8 Jun 2016 15:36:26 +0800 [thread overview]
Message-ID: <1465371386-14479-1-git-send-email-wens@csie.org> (raw)
The switch is clearly labeled "power" on the board.
The LED is red, and is lit by default through an external pull up.
Label it as "pwr" even though there is no explicit marking.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Hi Maxime,
This patch fixes 2 copy paste errors in the bpi-m2+ dts that slipped
through. Can you squash it into my original patch?
Thanks
ChenYu
---
arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts
index 8a19b4b44f1f..8387c458d615 100644
--- a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts
@@ -67,7 +67,7 @@
pinctrl-0 = <&pwr_led_bpi_m2p>;
pwr_led {
- label = "orangepi:green:pwr";
+ label = "bpi-m2+:red:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
@@ -79,7 +79,7 @@
pinctrl-0 = <&sw_r_bpi_m2p>;
sw4 {
- label = "sw4";
+ label = "power";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
--
2.8.1
next reply other threads:[~2016-06-08 7:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 7:36 Chen-Yu Tsai [this message]
2016-06-09 18:51 ` [PATCH] ARM: dts: sun8i-h3: sinovoip-bpi-m2-plus: Fix LED and switch labels Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465371386-14479-1-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).