From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755388AbcFHHgb (ORCPT ); Wed, 8 Jun 2016 03:36:31 -0400 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:33848 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751240AbcFHHga (ORCPT ); Wed, 8 Jun 2016 03:36:30 -0400 From: Chen-Yu Tsai To: Maxime Ripard Cc: Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] ARM: dts: sun8i-h3: sinovoip-bpi-m2-plus: Fix LED and switch labels Date: Wed, 8 Jun 2016 15:36:26 +0800 Message-Id: <1465371386-14479-1-git-send-email-wens@csie.org> X-Mailer: git-send-email 2.8.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The switch is clearly labeled "power" on the board. The LED is red, and is lit by default through an external pull up. Label it as "pwr" even though there is no explicit marking. Signed-off-by: Chen-Yu Tsai --- Hi Maxime, This patch fixes 2 copy paste errors in the bpi-m2+ dts that slipped through. Can you squash it into my original patch? Thanks ChenYu --- arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts index 8a19b4b44f1f..8387c458d615 100644 --- a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts @@ -67,7 +67,7 @@ pinctrl-0 = <&pwr_led_bpi_m2p>; pwr_led { - label = "orangepi:green:pwr"; + label = "bpi-m2+:red:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; @@ -79,7 +79,7 @@ pinctrl-0 = <&sw_r_bpi_m2p>; sw4 { - label = "sw4"; + label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; }; -- 2.8.1