From: Binoy Jayan <binoy.jayan@linaro.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Larry Finger <Larry.Finger@lwfinger.net>,
Jes Sorensen <Jes.Sorensen@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
driverdev-devel@linuxdriverproject.org,
linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org,
Binoy Jayan <binoy.jayan@linaro.org>
Subject: [PATCH 1/2] staging: r8723au: pwrctrl_priv: Replace semaphore lock with mutex
Date: Wed, 8 Jun 2016 13:10:54 +0530 [thread overview]
Message-ID: <1465371655-6768-2-git-send-email-binoy.jayan@linaro.org> (raw)
In-Reply-To: <1465371655-6768-1-git-send-email-binoy.jayan@linaro.org>
The semaphore 'lock' in pwrctrl_priv is a simple mutex, so it should
be written as one. Semaphores are going away in the future.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
---
drivers/staging/rtl8723au/core/rtw_pwrctrl.c | 11 ++++++-----
drivers/staging/rtl8723au/include/rtw_pwrctrl.h | 3 ++-
drivers/staging/rtl8723au/os_dep/usb_intf.c | 11 ++++++-----
3 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/rtl8723au/core/rtw_pwrctrl.c b/drivers/staging/rtl8723au/core/rtw_pwrctrl.c
index 7488a10..2d43958 100644
--- a/drivers/staging/rtl8723au/core/rtw_pwrctrl.c
+++ b/drivers/staging/rtl8723au/core/rtw_pwrctrl.c
@@ -14,6 +14,7 @@
******************************************************************************/
#define _RTW_PWRCTRL_C_
+#include <linux/mutex.h>
#include <osdep_service.h>
#include <drv_types.h>
#include <osdep_intf.h>
@@ -27,7 +28,7 @@ void ips_enter23a(struct rtw_adapter *padapter)
{
struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
- down(&pwrpriv->lock);
+ mutex_lock(&pwrpriv->mutex_lock);
pwrpriv->bips_processing = true;
@@ -50,7 +51,7 @@ void ips_enter23a(struct rtw_adapter *padapter)
}
pwrpriv->bips_processing = false;
- up(&pwrpriv->lock);
+ mutex_unlock(&pwrpriv->mutex_lock);
}
int ips_leave23a(struct rtw_adapter *padapter)
@@ -61,7 +62,7 @@ int ips_leave23a(struct rtw_adapter *padapter)
int result = _SUCCESS;
int keyid;
- down(&pwrpriv->lock);
+ mutex_lock(&pwrpriv->mutex_lock);
if (pwrpriv->rf_pwrstate == rf_off && !pwrpriv->bips_processing) {
pwrpriv->bips_processing = true;
@@ -106,7 +107,7 @@ int ips_leave23a(struct rtw_adapter *padapter)
pwrpriv->bpower_saving = false;
}
- up(&pwrpriv->lock);
+ mutex_unlock(&pwrpriv->mutex_lock);
return result;
}
@@ -423,7 +424,7 @@ void rtw_init_pwrctrl_priv23a(struct rtw_adapter *padapter)
{
struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
- sema_init(&pwrctrlpriv->lock, 1);
+ mutex_init(&pwrctrlpriv->mutex_lock);
pwrctrlpriv->rf_pwrstate = rf_on;
pwrctrlpriv->ips_enter23a_cnts = 0;
pwrctrlpriv->ips_leave23a_cnts = 0;
diff --git a/drivers/staging/rtl8723au/include/rtw_pwrctrl.h b/drivers/staging/rtl8723au/include/rtw_pwrctrl.h
index 599fed9..699b9f3 100644
--- a/drivers/staging/rtl8723au/include/rtw_pwrctrl.h
+++ b/drivers/staging/rtl8723au/include/rtw_pwrctrl.h
@@ -15,6 +15,7 @@
#ifndef __RTW_PWRCTRL_H_
#define __RTW_PWRCTRL_H_
+#include <linux/mutex.h>
#include <osdep_service.h>
#include <drv_types.h>
@@ -149,7 +150,7 @@ enum { /* for ips_mode */
};
struct pwrctrl_priv {
- struct semaphore lock;
+ struct mutex mutex_lock;
volatile u8 rpwm; /* requested power state for fw */
volatile u8 cpwm; /* fw current power state. updated when 1.
* read from HCPWM 2. driver lowers power level
diff --git a/drivers/staging/rtl8723au/os_dep/usb_intf.c b/drivers/staging/rtl8723au/os_dep/usb_intf.c
index cf83eff..fa7dda5 100644
--- a/drivers/staging/rtl8723au/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8723au/os_dep/usb_intf.c
@@ -14,6 +14,7 @@
******************************************************************************/
#define _HCI_INTF_C_
+#include <linux/mutex.h>
#include <osdep_service.h>
#include <drv_types.h>
#include <recv_osdep.h>
@@ -291,7 +292,7 @@ static int rtw_suspend(struct usb_interface *pusb_intf, pm_message_t message)
rtw_cancel_all_timer23a(padapter);
LeaveAllPowerSaveMode23a(padapter);
- down(&pwrpriv->lock);
+ mutex_lock(&pwrpriv->mutex_lock);
/* padapter->net_closed = true; */
/* s1. */
if (pnetdev) {
@@ -321,7 +322,7 @@ static int rtw_suspend(struct usb_interface *pusb_intf, pm_message_t message)
rtw_free_network_queue23a(padapter);
rtw_dev_unload(padapter);
- up(&pwrpriv->lock);
+ mutex_unlock(&pwrpriv->mutex_lock);
if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY))
rtw_cfg80211_indicate_scan_done(
@@ -353,20 +354,20 @@ static int rtw_resume(struct usb_interface *pusb_intf)
pnetdev = padapter->pnetdev;
pwrpriv = &padapter->pwrctrlpriv;
- down(&pwrpriv->lock);
+ mutex_lock(&pwrpriv->mutex_lock);
rtw_reset_drv_sw23a(padapter);
pwrpriv->bkeepfwalive = false;
DBG_8723A("bkeepfwalive(%x)\n", pwrpriv->bkeepfwalive);
if (pm_netdev_open23a(pnetdev, true) != 0) {
- up(&pwrpriv->lock);
+ mutex_unlock(&pwrpriv->mutex_lock);
goto exit;
}
netif_device_attach(pnetdev);
netif_carrier_on(pnetdev);
- up(&pwrpriv->lock);
+ mutex_unlock(&pwrpriv->mutex_lock);
if (padapter->pid[1] != 0) {
DBG_8723A("pid[1]:%d\n", padapter->pid[1]);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-06-08 7:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 7:40 [PATCH 0/2] *** r8723au: Replace semaphore lock with mutex *** Binoy Jayan
2016-06-08 7:40 ` Binoy Jayan [this message]
2016-06-08 7:40 ` [PATCH 2/2] staging: r8723au: Remove unused semaphores Binoy Jayan
2016-06-08 12:21 ` [PATCH 0/2] *** r8723au: Replace semaphore lock with mutex *** Jes Sorensen
2016-06-08 15:38 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465371655-6768-2-git-send-email-binoy.jayan@linaro.org \
--to=binoy.jayan@linaro.org \
--cc=Jes.Sorensen@redhat.com \
--cc=Larry.Finger@lwfinger.net \
--cc=arnd@arndb.de \
--cc=driverdev-devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).