From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756118AbcFHIFw (ORCPT ); Wed, 8 Jun 2016 04:05:52 -0400 Received: from lucky1.263xmail.com ([211.157.147.133]:45876 "EHLO lucky1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756062AbcFHIFg (ORCPT ); Wed, 8 Jun 2016 04:05:36 -0400 X-263anti-spam: KSV:0; X-MAIL-GRAY: 1 X-MAIL-DELIVERY: 0 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-ADDR-CHECKED: 0 X-RL-SENDER: shawn.lin@rock-chips.com X-FST-TO: bhelgaas@google.com X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: shawn.lin@rock-chips.com X-UNIQUE-TAG: <4ed63a041156d40b1a57bf98b7fdd2ff> X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 From: Shawn Lin To: Bjorn Helgaas Cc: Marc Zyngier , linux-pci@vger.kernel.org, Arnd Bergmann , linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, Heiko Stuebner , Doug Anderson , Wenrui Li , Rob Herring , devicetree@vger.kernel.org, Shawn Lin Subject: [PATCH v2 1/2] Documentation: bindings: add dt doc for Rockchip PCIe controller Date: Wed, 8 Jun 2016 16:05:17 +0800 Message-Id: <1465373117-823-1-git-send-email-shawn.lin@rock-chips.com> X-Mailer: git-send-email 1.8.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds a binding that describes the Rockchip PCIe controller found on Rockchip SoCs PCIe interface. Signed-off-by: Shawn Lin --- Changes in v2: - fix lots clk/reset stuff suggested by Heiko - remove msi-parent and add msi-map suggested by Marc - drop phy related stuff - some others minor fixes .../devicetree/bindings/pci/rockchip-pcie.txt | 86 ++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/rockchip-pcie.txt diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt new file mode 100644 index 0000000..eb92e29 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -0,0 +1,86 @@ +* Rockchip AXI PCIe Root Port Bridge DT description + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- compatible: Should contain "rockchip,rk3399-pcie" +- reg: Two register ranges as listed in the reg-names property +- reg-names: Must include the following names + - "axi-base" + - "apb-base" +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - "aclk" + - "aclk-perf" + - "hclk" + - "pm" +- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. +- phy-names: MUST be "pcie-phy". +- interrupts: Three interrupt entries must be specified. +- interrupt-names: Must include the following names + - "sys" + - "legacy" + - "client" +- resets: Must contain five entries for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following names + - "core" + - "mgmt" + - "mgmt-sticky" + - "pipe" +- pinctrl-names : The pin control state names +- pinctrl-0: The "default" pinctrl state +- interrupt-map-mask and interrupt-map: standard PCI properties +- interrupt-controller: identifies the node as an interrupt controller + +Optional Property: +- ep-gpios: contain the entry for pre-reset gpio +- num-lanes: number of lanes to use +- vpcie3v3-supply: The phandle to the 3.3v regulator to use for pcie. If this + is specified we'll defer probe until we can find this regulator. +- vpcie1v8-supply: The phandle to the 1.8v regulator to use for pcie. If this + is specified we'll defer probe until we can find this regulator. +- vpcie0v9-supply: The phandle to the 0.9v regulator to use for pcie. If this + is specified we'll defer probe until we can find this regulator. + +Example: + +pcie0: pcie@f8000000 { + compatible = "rockchip,rk3399-pcie"; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>; + clock-names = "aclk", "aclk-perf", + "hclk"; + bus-range = <0x0 0x1>; + interrupts = , , + ; + interrupt-names: "sys", "legacy", "client"; + assigned-clocks = <&cru SCLK_PCIEPHY_REF>; + assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; + assigned-clock-rates = <100000000>; + ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + ranges = < 0x82000000 0 0xfa000000 0x0 0xfa000000 0 0x600000 + 0x81000000 0 0xfa600000 0x0 0xfa600000 0 0x100000 >; + num-lanes = <4>; + reg = < 0x0 0xf8000000 0x0 0x2000000 >, < 0x0 0xfd000000 0x0 0x1000000 >; + reg-name = "axi-base", "apb-base"; + resets = <&cru SRST_PCIEPHY>, <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreq>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0 1>, + <0 0 0 2 &pcie0 2>, + <0 0 0 3 &pcie0 3>, + <0 0 0 4 &pcie0 4>; +}; -- 2.3.7