linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com>
To: mpe@ellerman.id.au
Cc: benh@au1.ibm.com, paulus@ozlabs.org, mikey@neuling.org,
	ego@linux.vnet.ibm.com, maddy@linux.vnet.ibm.com,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	"Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com>
Subject: [PATCH v6 02/11] powerpc/kvm: make hypervisor state restore a function
Date: Wed,  8 Jun 2016 11:54:22 -0500	[thread overview]
Message-ID: <1465404871-5406-3-git-send-email-shreyas@linux.vnet.ibm.com> (raw)
In-Reply-To: <1465404871-5406-1-git-send-email-shreyas@linux.vnet.ibm.com>

In the current code, when the thread wakes up in reset vector, some
of the state restore code and check for whether a thread needs to
branch to kvm is duplicated. Reorder the code such that this
duplication is avoided.

At a higher level this is what the change looks like-

Before this patch -
power7_wakeup_tb_loss:
	restore hypervisor state
	if (thread needed by kvm)
		goto kvm_start_guest
	restore nvgprs, cr, pc
	rfid to process context

power7_wakeup_loss:
	restore nvgprs, cr, pc
	rfid to process context

reset vector:
	if (waking from deep idle states)
		goto power7_wakeup_tb_loss
	else
		if (thread needed by kvm)
			goto kvm_start_guest
		goto power7_wakeup_loss

After this patch -
power7_wakeup_tb_loss:
	restore hypervisor state
	return

power7_restore_hyp_resource():
	if (waking from deep idle states)
		goto power7_wakeup_tb_loss
	return

power7_wakeup_loss:
	restore nvgprs, cr, pc
	rfid to process context

reset vector:
	power7_restore_hyp_resource()
	if (thread needed by kvm)
                goto kvm_start_guest
	goto power7_wakeup_loss

Reviewed-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
---
- No changes since v3

Changes in v3:
=============
- Retaining GET_PACA(r13) in System Reset vector instead of moving it
  to power7_restore_hyp_resource
- Added comments indicating entry conditions for power7_restore_hyp_resource
- Improved comments around return statements

 arch/powerpc/kernel/exceptions-64s.S | 28 ++------------
 arch/powerpc/kernel/idle_power7.S    | 72 +++++++++++++++++++++---------------
 2 files changed, 46 insertions(+), 54 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4c94406..4a74d6a 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -107,25 +107,9 @@ BEGIN_FTR_SECTION
 	beq	9f
 
 	cmpwi	cr3,r13,2
-
-	/*
-	 * Check if last bit of HSPGR0 is set. This indicates whether we are
-	 * waking up from winkle.
-	 */
 	GET_PACA(r13)
-	clrldi	r5,r13,63
-	clrrdi	r13,r13,1
-	cmpwi	cr4,r5,1
-	mtspr	SPRN_HSPRG0,r13
+	bl	power7_restore_hyp_resource
 
-	lbz	r0,PACA_THREAD_IDLE_STATE(r13)
-	cmpwi   cr2,r0,PNV_THREAD_NAP
-	bgt     cr2,8f				/* Either sleep or Winkle */
-
-	/* Waking up from nap should not cause hypervisor state loss */
-	bgt	cr3,.
-
-	/* Waking up from nap */
 	li	r0,PNV_THREAD_RUNNING
 	stb	r0,PACA_THREAD_IDLE_STATE(r13)	/* Clear thread state */
 
@@ -143,13 +127,9 @@ BEGIN_FTR_SECTION
 
 	/* Return SRR1 from power7_nap() */
 	mfspr	r3,SPRN_SRR1
-	beq	cr3,2f
-	b	power7_wakeup_noloss
-2:	b	power7_wakeup_loss
-
-	/* Fast Sleep wakeup on PowerNV */
-8:	GET_PACA(r13)
-	b 	power7_wakeup_tb_loss
+	blt	cr3,2f
+	b	power7_wakeup_loss
+2:	b	power7_wakeup_noloss
 
 9:
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 705c867..d5def06 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -276,6 +276,39 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66);		\
 20:	nop;
 
 
+/*
+ * Called from reset vector. Check whether we have woken up with
+ * hypervisor state loss. If yes, restore hypervisor state and return
+ * back to reset vector.
+ *
+ * r13 - Contents of HSPRG0
+ * cr3 - set to gt if waking up with partial/complete hypervisor state loss
+ */
+_GLOBAL(power7_restore_hyp_resource)
+	/*
+	 * Check if last bit of HSPGR0 is set. This indicates whether we are
+	 * waking up from winkle.
+	 */
+	clrldi	r5,r13,63
+	clrrdi	r13,r13,1
+	cmpwi	cr4,r5,1
+	mtspr	SPRN_HSPRG0,r13
+
+	lbz	r0,PACA_THREAD_IDLE_STATE(r13)
+	cmpwi   cr2,r0,PNV_THREAD_NAP
+	bgt     cr2,power7_wakeup_tb_loss	/* Either sleep or Winkle */
+
+	/*
+	 * We fall through here if PACA_THREAD_IDLE_STATE shows we are waking
+	 * up from nap. At this stage CR3 shouldn't contains 'gt' since that
+	 * indicates we are waking with hypervisor state loss from nap.
+	 */
+	bgt	cr3,.
+
+	blr	/* Return back to System Reset vector from where
+		   power7_restore_hyp_resource was invoked */
+
+
 _GLOBAL(power7_wakeup_tb_loss)
 	ld	r2,PACATOC(r13);
 	ld	r1,PACAR1(r13)
@@ -284,11 +317,13 @@ _GLOBAL(power7_wakeup_tb_loss)
 	 * and they are restored before switching to the process context. Hence
 	 * until they are restored, they are free to be used.
 	 *
-	 * Save SRR1 in a NVGPR as it might be clobbered in opal_call_realmode
-	 * (called in CHECK_HMI_INTERRUPT). SRR1 is required to determine the
-	 * wakeup reason if we branch to kvm_start_guest.
+	 * Save SRR1 and LR in NVGPRs as they might be clobbered in
+	 * opal_call_realmode (called in CHECK_HMI_INTERRUPT). SRR1 is required
+	 * to determine the wakeup reason if we branch to kvm_start_guest. LR
+	 * is required to return back to reset vector after hypervisor state
+	 * restore is complete.
 	 */
-
+	mflr	r17
 	mfspr	r16,SPRN_SRR1
 BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
@@ -438,33 +473,10 @@ common_exit:
 
 hypervisor_state_restored:
 
-	li	r5,PNV_THREAD_RUNNING
-	stb     r5,PACA_THREAD_IDLE_STATE(r13)
-
 	mtspr	SPRN_SRR1,r16
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-	li      r0,KVM_HWTHREAD_IN_KERNEL
-	stb     r0,HSTATE_HWTHREAD_STATE(r13)
-	/* Order setting hwthread_state vs. testing hwthread_req */
-	sync
-	lbz     r0,HSTATE_HWTHREAD_REQ(r13)
-	cmpwi   r0,0
-	beq     6f
-	b       kvm_start_guest
-6:
-#endif
-
-	REST_NVGPRS(r1)
-	REST_GPR(2, r1)
-	ld	r3,_CCR(r1)
-	ld	r4,_MSR(r1)
-	ld	r5,_NIP(r1)
-	addi	r1,r1,INT_FRAME_SIZE
-	mtcr	r3
-	mfspr	r3,SPRN_SRR1		/* Return SRR1 */
-	mtspr	SPRN_SRR1,r4
-	mtspr	SPRN_SRR0,r5
-	rfid
+	mtlr	r17
+	blr	/* Return back to System Reset vector from where
+		   power7_restore_hyp_resource was invoked */
 
 fastsleep_workaround_at_exit:
 	li	r3,1
-- 
2.1.4

  parent reply	other threads:[~2016-06-08 16:58 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08 16:54 [PATCH v6 00/11] powerpc/powernv/cpuidle: Add support for POWER ISA v3 idle states Shreyas B. Prabhu
2016-06-08 16:54 ` [PATCH v6 01/11] powerpc/powernv: Use PNV_THREAD_WINKLE macro while requesting for winkle Shreyas B. Prabhu
2016-06-08 16:54 ` Shreyas B. Prabhu [this message]
2016-06-08 16:54 ` [PATCH v6 03/11] powerpc/powernv: Rename idle_power7.S to idle_power_common.S Shreyas B. Prabhu
2016-06-15  5:31   ` [v6, " Michael Ellerman
2016-06-08 16:54 ` [PATCH v6 04/11] powerpc/powernv: Rename reusable idle functions to hardware agnostic names Shreyas B. Prabhu
2016-06-08 16:54 ` [PATCH v6 05/11] powerpc/powernv: Make pnv_powersave_common more generic Shreyas B. Prabhu
2016-06-08 16:54 ` [PATCH v6 06/11] powerpc/powernv: abstraction for saving SPRs before entering deep idle states Shreyas B. Prabhu
2016-06-08 16:54 ` [PATCH v6 07/11] powerpc/powernv: set power_save func after the idle states are initialized Shreyas B. Prabhu
2016-06-15  5:41   ` [v6, " Michael Ellerman
2016-06-15  6:11     ` Shreyas B Prabhu
2016-06-22  1:54   ` [PATCH v6 " Benjamin Herrenschmidt
2016-06-22  5:11     ` Michael Neuling
2016-06-28 12:10   ` [v6, " Michael Ellerman
2016-06-08 16:54 ` [PATCH v6 08/11] powerpc/powernv: Add platform support for stop instruction Shreyas B. Prabhu
2016-06-15 11:14   ` [v6, " Michael Ellerman
2016-06-15 13:00     ` Shreyas B Prabhu
2016-06-21  6:14       ` Michael Neuling
2016-06-08 16:54 ` [PATCH v6 09/11] cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES Shreyas B. Prabhu
2016-06-13 15:01   ` Daniel Lezcano
2016-06-13 20:58     ` Rafael J. Wysocki
2016-06-08 16:54 ` [PATCH v6 10/11] cpuidle/powernv: Add support for POWER ISA v3 idle states Shreyas B. Prabhu
2016-06-13 15:34   ` Daniel Lezcano
2016-06-14 10:47     ` Shreyas B Prabhu
2016-06-14 11:29       ` Benjamin Herrenschmidt
2016-06-15  4:57         ` Shreyas B Prabhu
2016-06-13 21:48   ` Benjamin Herrenschmidt
2016-06-14 11:11     ` Shreyas B Prabhu
2016-06-14 11:31       ` Benjamin Herrenschmidt
2016-06-08 16:54 ` [PATCH v6 11/11] powerpc/powernv: Use deepest stop state when cpu is offlined Shreyas B. Prabhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465404871-5406-3-git-send-email-shreyas@linux.vnet.ibm.com \
    --to=shreyas@linux.vnet.ibm.com \
    --cc=benh@au1.ibm.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.vnet.ibm.com \
    --cc=mikey@neuling.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).