linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lee Jones <lee.jones@linaro.org>,
	Feng Chen <puck.chen@hisilicon.com>,
	Wei Xu <xuwei5@hisilicon.com>, Guodong Xu <guodong.xu@linaro.org>,
	John Stultz <john.stultz@linaro.org>
Subject: [PATCH 1/3] drivers: input: powerkey for HISI 65xx SoC
Date: Thu,  9 Jun 2016 22:34:35 -0700	[thread overview]
Message-ID: <1465536877-18452-2-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1465536877-18452-1-git-send-email-john.stultz@linaro.org>

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>

This driver provides a input driver for the power button on the
HiSi 65xx SoC for boards like HiKey.

This driver was originally by Zhiliang Xue <xuezhiliang@huawei.com>
then basically rewritten by Jorge, but preserving the original
module author credits.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Cc: Feng Chen <puck.chen@hisilicon.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
[jstultz: Reworked commit message, folded in other fixes/cleanups
from Jorge, implemented some larger cleanups suggested by DmitryT]
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Major rework integrating feedback from Dmitry.
v3: Dropped of_match compatible line since no longer using DT
    for this.

 drivers/input/misc/Kconfig         |   9 +++
 drivers/input/misc/Makefile        |   1 +
 drivers/input/misc/hisi_powerkey.c | 149 +++++++++++++++++++++++++++++++++++++
 3 files changed, 159 insertions(+)
 create mode 100644 drivers/input/misc/hisi_powerkey.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 1f2337a..07aacfc 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -796,4 +796,13 @@ config INPUT_DRV2667_HAPTICS
 	  To compile this driver as a module, choose M here: the
 	  module will be called drv2667-haptics.
 
+config HISI_POWERKEY
+	tristate "Hisilicon PMIC ONKEY support"
+	depends on ARCH_HISI || COMPILE_TEST
+	help
+	  Say Y to enable support for PMIC ONKEY.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hisi_powerkey.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0357a08..f264777 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -75,3 +75,4 @@ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR)	+= ideapad_slidebar.o
+obj-$(CONFIG_HISI_POWERKEY)		+= hisi_powerkey.o
diff --git a/drivers/input/misc/hisi_powerkey.c b/drivers/input/misc/hisi_powerkey.c
new file mode 100644
index 0000000..d3afebc
--- /dev/null
+++ b/drivers/input/misc/hisi_powerkey.c
@@ -0,0 +1,149 @@
+/*
+ * Hisilicon PMIC powerkey driver
+ *
+ * Copyright (C) 2013 Hisilicon Ltd.
+ * Copyright (C) 2015, 2016 Linaro Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+/* the held interrupt will trigger after 4 seconds */
+#define MAX_HELD_TIME	(4 * MSEC_PER_SEC)
+
+
+enum id_action { ID_PRESSED, ID_RELEASED, ID_HELD, ID_LAST };
+const char *const irq_names[ID_LAST] = {"down", "up", "hold 4s"};
+
+struct hi65xx_priv {
+	struct input_dev *input;
+};
+
+static irqreturn_t hi65xx_power_press_isr(int irq, void *q)
+{
+	struct hi65xx_priv *p = q;
+
+	pm_wakeup_event(p->input->dev.parent, MAX_HELD_TIME);
+	input_report_key(p->input, KEY_POWER, 1);
+	input_sync(p->input);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t hi65xx_power_release_isr(int irq, void *q)
+{
+	struct hi65xx_priv *p = q;
+
+	pm_wakeup_event(p->input->dev.parent, MAX_HELD_TIME);
+	input_report_key(p->input, KEY_POWER, 0);
+	input_sync(p->input);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t hi65xx_restart_toggle_isr(int irq, void *q)
+{
+	struct hi65xx_priv *p = q;
+	int value = test_bit(KEY_RESTART, p->input->key);
+
+	pm_wakeup_event(p->input->dev.parent, MAX_HELD_TIME);
+	input_report_key(p->input, KEY_RESTART, !value);
+	input_sync(p->input);
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t (*irq_handlers[ID_LAST])(int irq, void *q) = {
+	hi65xx_power_press_isr,
+	hi65xx_power_release_isr,
+	hi65xx_restart_toggle_isr,
+};
+
+static int hi65xx_powerkey_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct hi65xx_priv *priv;
+	int irq, i, ret;
+
+	priv = devm_kzalloc(dev, sizeof(struct hi65xx_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->input = devm_input_allocate_device(&pdev->dev);
+	if (!priv->input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	priv->input->phys = "hisi_on/input0";
+	priv->input->name = "HISI 65xx PowerOn Key";
+
+	input_set_capability(priv->input, EV_KEY, KEY_POWER);
+	input_set_capability(priv->input, EV_KEY, KEY_RESTART);
+
+	for (i = 0; i < ID_LAST; i++) {
+
+		irq = platform_get_irq_byname(pdev, irq_names[i]);
+		if (irq < 0) {
+			dev_err(dev, "couldn't get irq %s\n", irq_names[i]);
+			return irq;
+		}
+
+		ret = devm_request_any_context_irq(dev, irq,
+					irq_handlers[i], IRQF_ONESHOT,
+					irq_names[i], priv);
+		if (ret < 0) {
+			dev_err(dev, "couldn't get irq %s\n", irq_names[i]);
+			return ret;
+		}
+	}
+
+	ret = input_register_device(priv->input);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register input device: %d\n",
+			ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int hi65xx_powerkey_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, 0);
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(of, hi65xx_powerkey_of_match);
+
+static struct platform_driver hi65xx_powerkey_driver = {
+	.driver = {
+		.name = "hi65xx-powerkey",
+	},
+	.probe = hi65xx_powerkey_probe,
+	.remove  = hi65xx_powerkey_remove,
+};
+
+module_platform_driver(hi65xx_powerkey_driver);
+
+MODULE_AUTHOR("Zhiliang Xue <xuezhiliang@huawei.com");
+MODULE_DESCRIPTION("Hisi PMIC Power key driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

  reply	other threads:[~2016-06-10  5:35 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-10  5:34 [PATCH 0/3] Hi655x powerkey support for HiKey (v3) John Stultz
2016-06-10  5:34 ` John Stultz [this message]
2016-06-10  6:44   ` [PATCH 1/3] drivers: input: powerkey for HISI 65xx SoC kbuild test robot
2016-06-10  7:09     ` John Stultz
2016-06-10  9:35   ` kbuild test robot
2016-06-10  5:34 ` [PATCH 2/3] mfd: hi655x-pmic: Fixup issue with un-acked interrupts John Stultz
2016-06-10  5:34 ` [PATCH 3/3] mfd: hi655x-pmic: Add powerkey device to hi655x PMIC driver John Stultz
2016-06-10  7:32   ` Lee Jones
2016-06-10  7:36     ` John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465536877-18452-2-git-send-email-john.stultz@linaro.org \
    --to=john.stultz@linaro.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=guodong.xu@linaro.org \
    --cc=jorge.ramirez-ortiz@linaro.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=puck.chen@hisilicon.com \
    --cc=robh+dt@kernel.org \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).