From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Antoine Aubert <a.aubert@overkiz.com>
Subject: [PATCH 48/48] ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding
Date: Sat, 11 Jun 2016 00:03:51 +0200 [thread overview]
Message-ID: <1465596231-21766-49-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1465596231-21766-1-git-send-email-alexandre.belloni@free-electrons.com>
Switch to the new pwm-atmel-tcb binding that avoid wasting TCB channels.
Cc: Antoine Aubert <a.aubert@overkiz.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91-kizbox.dts | 42 +++++++++++++++++++++++++--------------
1 file changed, 27 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 58c5d0d3dd66..6579f955250b 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -43,6 +43,29 @@
};
};
+ tcb1: timer@fffdc000 {
+ tcb1_pwm0: pwm@0 {
+ compatible = "atmel,tcb-pwm";
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>;
+ }
+
+ tcb1_pwm1: pwm@1 {
+ compatible = "atmel,tcb-pwm";
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = &pinctrl_tcb1_tioa1>;
+ }
+
+ tcb1_pwm2: pwm@2 {
+ compatible = "atmel,tcb-pwm";
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tcb1_tioa2>;
+ }
+ };
+
macb0: ethernet@fffc4000 {
phy-mode = "mii";
pinctrl-0 = <&pinctrl_macb_rmii
@@ -122,41 +145,30 @@
network_green {
label = "pwm:green:network";
- pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+ pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
network_red {
label = "pwm:red:network";
- pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
+ pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
user_green {
label = "pwm:green:user";
- pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+ pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
user_red {
label = "pwm:red:user";
- pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+ pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
};
-
- tcb_pwm: pwm {
- compatible = "atmel,tcb-pwm";
- #pwm-cells = <3>;
- tc-block = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_tcb1_tioa0
- &pinctrl_tcb1_tioa1
- &pinctrl_tcb1_tioa2
- &pinctrl_tcb1_tiob0>;
- };
};
--
2.8.1
next prev parent reply other threads:[~2016-06-10 22:04 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 22:03 [PATCH 00/48] ARM: at91: rework Atmel TCB drivers Alexandre Belloni
2016-06-10 22:03 ` [PATCH 01/48] clk: at91: replace usleep() by udelay() calls Alexandre Belloni
2016-06-10 22:30 ` Arnd Bergmann
2016-06-10 22:37 ` Alexandre Belloni
2016-06-13 15:24 ` Alexandre Belloni
2016-06-13 19:26 ` Arnd Bergmann
2016-06-14 16:05 ` Afzal Mohammed
2016-06-14 16:18 ` Boris Brezillon
2016-06-11 7:49 ` Boris Brezillon
2016-06-10 22:03 ` [PATCH 02/48] ARM: at91: Document new TCB bindings Alexandre Belloni
2016-06-14 21:47 ` Rob Herring
2016-06-15 7:29 ` Boris Brezillon
2016-06-21 20:08 ` Rob Herring
2016-06-21 20:28 ` Rob Herring
2016-06-10 22:03 ` [PATCH 03/48] ARM: dts: at91: at91rm9200: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 04/48] ARM: dts: at91: at91rm9200ek; use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 05/48] ARM: dts: at91: mpa1600; " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 06/48] ARM: dts: at91: at91sam9260: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 07/48] ARM: dts: at91: ethernut5: use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 08/48] ARM: dts: at91: foxg20: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 09/48] ARM: dts: at91: animeo_ip: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 10/48] ARM: dts: at91: kizbox: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 11/48] ARM: dts: at91: at91sam9g20ek: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 12/48] ARM: dts: at91: ge863-pro3: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 13/48] ARM: dts: at91: at91sam9261: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 14/48] ARM: dts: at91: at91sam9261ek: use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 15/48] ARM: dts: at91: at91sam9263: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 16/48] ARM: dts: at91: at91sam9263ek: use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 17/48] ARM: dts: at91: calao: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 18/48] ARM: dts: at91: at91sam9g45: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 19/48] ARM: dts: at91: at91sam9m10g45ek: use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 20/48] ARM: dts: at91: pm9g45: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 21/48] ARM: dts: at91: at91sam9rl: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 22/48] ARM: dts: at91: at91sam9rlek: use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 23/48] ARM: dts: at91: at91sam9n12: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 24/48] ARM: dts: at91: at91sam9n12ek: use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 25/48] ARM: dts: at91: at91sam9x5: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 26/48] ARM: dts: at91: at91sam9x5cm: use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 27/48] ARM: dts: at91: acme/g25: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 28/48] ARM: dts: at91: cosino: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 29/48] ARM: dts: at91: kizboxmini: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 30/48] ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 31/48] ARM: dts: at91: sama5d3xek; use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 32/48] ARM: dts: at91: sama5d3 Xplained: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 33/48] ARM: dts: at91: kizbox2: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 34/48] ARM: dts: at91: sama5d4: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 35/48] ARM: dts: at91: sama5d4: Add TCB2 Alexandre Belloni
2016-06-10 22:03 ` [PATCH 36/48] ARM: dts: at91: sama5d4ek: use TCB2 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 37/48] ARM: dts: at91: sama5d4 Xplained: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 38/48] ARM: dts: at91: ma5d4: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 39/48] ARM: dts: at91: vinco: " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 40/48] ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices Alexandre Belloni
2016-06-10 22:03 ` [PATCH 41/48] ARM: dts: at91: sama5d2 Xplained: use TCB0 as clocksource Alexandre Belloni
2016-06-10 22:03 ` [PATCH 42/48] clocksource/drivers: Add a new driver for the Atmel ARM TC blocks Alexandre Belloni
2016-06-11 12:48 ` Boris Brezillon
2016-06-22 13:07 ` Daniel Lezcano
2016-06-22 13:13 ` Boris Brezillon
2016-06-24 10:07 ` Daniel Lezcano
2017-05-16 11:59 ` Alexandre Belloni
2017-05-16 14:25 ` Daniel Lezcano
2017-05-16 14:35 ` Alexandre Belloni
2016-06-10 22:03 ` [PATCH 43/48] clocksource/drivers: Add a clockevent driver for Atmel " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 44/48] clocksource: atmel-pit: allow unselecting ATMEL_PIT Alexandre Belloni
2016-06-11 9:43 ` Thomas Gleixner
2016-06-11 10:53 ` Alexandre Belloni
2016-06-13 19:04 ` Boris Brezillon
2016-06-13 19:14 ` Thomas Gleixner
2016-06-16 14:41 ` Boris Brezillon
2016-06-10 22:03 ` [PATCH 45/48] ARM: at91/defconfig: sama5: unselect ATMEL_PIT Alexandre Belloni
2016-06-10 22:03 ` [PATCH 46/48] ARM: at91/defconfig: at91_dt " Alexandre Belloni
2016-06-10 22:03 ` [PATCH 47/48] PWM: atmel-tcb: switch to new binding Alexandre Belloni
2016-06-11 2:22 ` kbuild test robot
2016-06-10 22:03 ` Alexandre Belloni [this message]
2016-06-11 0:14 ` [PATCH 48/48] ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding kbuild test robot
2016-06-11 10:25 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465596231-21766-49-git-send-email-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=a.aubert@overkiz.com \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).