From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752550AbcFKPkJ (ORCPT ); Sat, 11 Jun 2016 11:40:09 -0400 Received: from mail-wm0-f67.google.com ([74.125.82.67]:36797 "EHLO mail-wm0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751997AbcFKPkG (ORCPT ); Sat, 11 Jun 2016 11:40:06 -0400 From: Ivaylo Dimitrov To: sakari.ailus@iki.fi Cc: sre@kernel.org, pali.rohar@gmail.com, pavel@ucw.cz, linux-media@vger.kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, mchehab@osg.samsung.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Ivaylo Dimitrov Subject: [PATCH v3 1/2] media: Driver for Toshiba et8ek8 5MP sensor Date: Sat, 11 Jun 2016 18:39:52 +0300 Message-Id: <1465659593-16858-2-git-send-email-ivo.g.dimitrov.75@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1465659593-16858-1-git-send-email-ivo.g.dimitrov.75@gmail.com> References: <1465659593-16858-1-git-send-email-ivo.g.dimitrov.75@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The sensor is found in Nokia N900 main camera Signed-off-by: Ivaylo Dimitrov --- drivers/media/i2c/Kconfig | 1 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/et8ek8/Kconfig | 6 + drivers/media/i2c/et8ek8/Makefile | 2 + drivers/media/i2c/et8ek8/et8ek8_driver.c | 1593 ++++++++++++++++++++++++++++++ drivers/media/i2c/et8ek8/et8ek8_mode.c | 590 +++++++++++ drivers/media/i2c/et8ek8/et8ek8_reg.h | 96 ++ 7 files changed, 2289 insertions(+) create mode 100644 drivers/media/i2c/et8ek8/Kconfig create mode 100644 drivers/media/i2c/et8ek8/Makefile create mode 100644 drivers/media/i2c/et8ek8/et8ek8_driver.c create mode 100644 drivers/media/i2c/et8ek8/et8ek8_mode.c create mode 100644 drivers/media/i2c/et8ek8/et8ek8_reg.h diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 993dc50..e964787 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -629,6 +629,7 @@ config VIDEO_S5K5BAF camera sensor with an embedded SoC image signal processor. source "drivers/media/i2c/smiapp/Kconfig" +source "drivers/media/i2c/et8ek8/Kconfig" config VIDEO_S5C73M3 tristate "Samsung S5C73M3 sensor support" diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 94f2c99..907b180 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -2,6 +2,7 @@ msp3400-objs := msp3400-driver.o msp3400-kthreads.o obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o obj-$(CONFIG_VIDEO_SMIAPP) += smiapp/ +obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8/ obj-$(CONFIG_VIDEO_CX25840) += cx25840/ obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ obj-y += soc_camera/ diff --git a/drivers/media/i2c/et8ek8/Kconfig b/drivers/media/i2c/et8ek8/Kconfig new file mode 100644 index 0000000..1439936 --- /dev/null +++ b/drivers/media/i2c/et8ek8/Kconfig @@ -0,0 +1,6 @@ +config VIDEO_ET8EK8 + tristate "ET8EK8 camera sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a driver for the Toshiba ET8EK8 5 MP camera sensor. + It is used for example in Nokia N900 (RX-51). diff --git a/drivers/media/i2c/et8ek8/Makefile b/drivers/media/i2c/et8ek8/Makefile new file mode 100644 index 0000000..66d1b7d --- /dev/null +++ b/drivers/media/i2c/et8ek8/Makefile @@ -0,0 +1,2 @@ +et8ek8-objs += et8ek8_mode.o et8ek8_driver.o +obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8.o diff --git a/drivers/media/i2c/et8ek8/et8ek8_driver.c b/drivers/media/i2c/et8ek8/et8ek8_driver.c new file mode 100644 index 0000000..5a38f1e --- /dev/null +++ b/drivers/media/i2c/et8ek8/et8ek8_driver.c @@ -0,0 +1,1593 @@ +/* + * et8ek8_driver.c + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Sakari Ailus + * Tuukka Toivonen + * + * Based on code from Toni Leinonen . + * + * This driver is based on the Micron MT9T012 camera imager driver + * (C) Texas Instruments. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "et8ek8_reg.h" + +#define ET8EK8_NAME "et8ek8" +#define ET8EK8_PRIV_MEM_SIZE 128 +#define ET8EK8_MAX_MSG 48 + +struct et8ek8_sensor { + struct v4l2_subdev subdev; + struct media_pad pad; + struct v4l2_mbus_framefmt format; + struct gpio_desc *reset; + struct regulator *vana; + struct clk *ext_clk; + u32 xclk_freq; + + u16 version; + + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *pixel_rate; + struct et8ek8_reglist *current_reglist; + + u8 priv_mem[ET8EK8_PRIV_MEM_SIZE]; + + struct mutex power_lock; + int power_count; +}; + +#define to_et8ek8_sensor(sd) container_of(sd, struct et8ek8_sensor, subdev) + +enum et8ek8_versions { + ET8EK8_REV_1 = 0x0001, + ET8EK8_REV_2, +}; + +/* + * This table describes what should be written to the sensor register + * for each gain value. The gain(index in the table) is in terms of + * 0.1EV, i.e. 10 indexes in the table give 2 time more gain [0] in + * the *analog gain, [1] in the digital gain + * + * Analog gain [dB] = 20*log10(regvalue/32); 0x20..0x100 + */ +static struct et8ek8_gain { + u16 analog; + u16 digital; +} const et8ek8_gain_table[] = { + { 32, 0}, /* x1 */ + { 34, 0}, + { 37, 0}, + { 39, 0}, + { 42, 0}, + { 45, 0}, + { 49, 0}, + { 52, 0}, + { 56, 0}, + { 60, 0}, + { 64, 0}, /* x2 */ + { 69, 0}, + { 74, 0}, + { 79, 0}, + { 84, 0}, + { 91, 0}, + { 97, 0}, + {104, 0}, + {111, 0}, + {119, 0}, + {128, 0}, /* x4 */ + {137, 0}, + {147, 0}, + {158, 0}, + {169, 0}, + {181, 0}, + {194, 0}, + {208, 0}, + {223, 0}, + {239, 0}, + {256, 0}, /* x8 */ + {256, 73}, + {256, 152}, + {256, 236}, + {256, 327}, + {256, 424}, + {256, 528}, + {256, 639}, + {256, 758}, + {256, 886}, + {256, 1023}, /* x16 */ +}; + +/* Register definitions */ +#define REG_REVISION_NUMBER_L 0x1200 +#define REG_REVISION_NUMBER_H 0x1201 + +#define PRIV_MEM_START_REG 0x0008 +#define PRIV_MEM_WIN_SIZE 8 + +#define ET8EK8_I2C_DELAY 3 /* msec delay b/w accesses */ + +#define USE_CRC 1 + +/* + * + * Register access helpers + * + */ + +/* + * Read a 8/16/32-bit i2c register. The value is returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int et8ek8_i2c_read_reg(struct i2c_client *client, u16 data_length, + u16 reg, u32 *val) +{ + int r; + struct i2c_msg msg[1]; + unsigned char data[4]; + + if (!client->adapter) + return -ENODEV; + if (data_length != ET8EK8_REG_8BIT && data_length != ET8EK8_REG_16BIT) + return -EINVAL; + + msg->addr = client->addr; + msg->flags = 0; + msg->len = 2; + msg->buf = data; + + /* high byte goes out first */ + data[0] = (u8) (reg >> 8); + data[1] = (u8) (reg & 0xff); + r = i2c_transfer(client->adapter, msg, 1); + if (r < 0) + goto err; + + msg->len = data_length; + msg->flags = I2C_M_RD; + r = i2c_transfer(client->adapter, msg, 1); + if (r < 0) + goto err; + + *val = 0; + /* high byte comes first */ + if (data_length == ET8EK8_REG_8BIT) + *val = data[0]; + else + *val = (data[0] << 8) + data[1]; + + return 0; + +err: + dev_err(&client->dev, "read from offset 0x%x error %d\n", reg, r); + + return r; +} + +static void et8ek8_i2c_create_msg(struct i2c_client *client, u16 len, u16 reg, + u32 val, struct i2c_msg *msg, + unsigned char *buf) +{ + msg->addr = client->addr; + msg->flags = 0; /* Write */ + msg->len = 2 + len; + msg->buf = buf; + + /* high byte goes out first */ + buf[0] = (u8) (reg >> 8); + buf[1] = (u8) (reg & 0xff); + + switch (len) { + case ET8EK8_REG_8BIT: + buf[2] = (u8) (val) & 0xff; + break; + case ET8EK8_REG_16BIT: + buf[2] = (u8) (val >> 8) & 0xff; + buf[3] = (u8) (val & 0xff); + break; + default: + WARN_ONCE(1, ET8EK8_NAME ": %s: invalid message length.\n", + __func__); + } +} + +/* + * A buffered write method that puts the wanted register write + * commands in a message list and passes the list to the i2c framework + */ +static int et8ek8_i2c_buffered_write_regs(struct i2c_client *client, + const struct et8ek8_reg *wnext, + int cnt) +{ + struct i2c_msg msg[ET8EK8_MAX_MSG]; + unsigned char data[ET8EK8_MAX_MSG][6]; + int wcnt = 0; + u16 reg, data_length; + u32 val; + + if (WARN_ONCE(cnt > ET8EK8_MAX_MSG, + ET8EK8_NAME ": %s: too many messages.\n", __func__)) { + return -EINVAL; + } + + /* Create new write messages for all writes */ + while (wcnt < cnt) { + data_length = wnext->type; + reg = wnext->reg; + val = wnext->val; + wnext++; + + et8ek8_i2c_create_msg(client, data_length, reg, + val, &msg[wcnt], &data[wcnt][0]); + + /* Update write count */ + wcnt++; + } + + /* Now we send everything ... */ + return i2c_transfer(client->adapter, msg, wcnt); +} + +/* + * Write a list of registers to i2c device. + * + * The list of registers is terminated by ET8EK8_REG_TERM. + * Returns zero if successful, or non-zero otherwise. + */ +static int et8ek8_i2c_write_regs(struct i2c_client *client, + const struct et8ek8_reg *regs) +{ + int r, cnt = 0; + const struct et8ek8_reg *next; + + if (!client->adapter) + return -ENODEV; + + if (!regs) + return -EINVAL; + + /* Initialize list pointers to the start of the list */ + next = regs; + + do { + /* + * We have to go through the list to figure out how + * many regular writes we have in a row + */ + while (next->type != ET8EK8_REG_TERM && + next->type != ET8EK8_REG_DELAY) { + /* + * Here we check that the actual length fields + * are valid + */ + if (WARN(next->type != ET8EK8_REG_8BIT && + next->type != ET8EK8_REG_16BIT, + "Invalid type = %d", next->type)) { + return -EINVAL; + } + /* + * Increment count of successive writes and + * read pointer + */ + cnt++; + next++; + } + + /* Now we start writing ... */ + r = et8ek8_i2c_buffered_write_regs(client, regs, cnt); + + /* ... and then check that everything was OK */ + if (r < 0) { + dev_err(&client->dev, "i2c transfer error !!!\n"); + return r; + } + + /* + * If we ran into a sleep statement when going through + * the list, this is where we snooze for the required time + */ + if (next->type == ET8EK8_REG_DELAY) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(msecs_to_jiffies(next->val)); + /* + * ZZZ ... + * Update list pointers and cnt and start over ... + */ + next++; + regs = next; + cnt = 0; + } + } while (next->type != ET8EK8_REG_TERM); + + return 0; +} + +/* + * Write to a 8/16-bit register. + * Returns zero if successful, or non-zero otherwise. + */ +static int et8ek8_i2c_write_reg(struct i2c_client *client, u16 data_length, + u16 reg, u32 val) +{ + int r; + struct i2c_msg msg[1]; + unsigned char data[6]; + + if (!client->adapter) + return -ENODEV; + if (data_length != ET8EK8_REG_8BIT && data_length != ET8EK8_REG_16BIT) + return -EINVAL; + + et8ek8_i2c_create_msg(client, data_length, reg, val, msg, data); + + r = i2c_transfer(client->adapter, msg, 1); + if (r < 0) + dev_err(&client->dev, + "wrote 0x%x to offset 0x%x error %d\n", val, reg, r); + else + r = 0; /* on success i2c_transfer() return messages trasfered */ + + return r; +} + +static struct et8ek8_reglist *et8ek8_reglist_find_type( + struct et8ek8_meta_reglist *meta, + u16 type) +{ + struct et8ek8_reglist **next = &meta->reglist[0].ptr; + + while (*next) { + if ((*next)->type == type) + return *next; + + next++; + } + + return NULL; +} + +static int et8ek8_i2c_reglist_find_write(struct i2c_client *client, + struct et8ek8_meta_reglist *meta, + u16 type) +{ + struct et8ek8_reglist *reglist; + + reglist = et8ek8_reglist_find_type(meta, type); + if (!reglist) + return -EINVAL; + + return et8ek8_i2c_write_regs(client, reglist->regs); +} + +static struct et8ek8_reglist **et8ek8_reglist_first( + struct et8ek8_meta_reglist *meta) +{ + return &meta->reglist[0].ptr; +} + +static void et8ek8_reglist_to_mbus(const struct et8ek8_reglist *reglist, + struct v4l2_mbus_framefmt *fmt) +{ + fmt->width = reglist->mode.window_width; + fmt->height = reglist->mode.window_height; + + if (reglist->mode.pixel_format == V4L2_PIX_FMT_SGRBG10DPCM8) + fmt->code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8; + else + fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10; +} + +static struct et8ek8_reglist *et8ek8_reglist_find_mode_fmt( + struct et8ek8_meta_reglist *meta, + struct v4l2_mbus_framefmt *fmt) +{ + struct et8ek8_reglist **list = et8ek8_reglist_first(meta); + struct et8ek8_reglist *best_match = NULL; + struct et8ek8_reglist *best_other = NULL; + struct v4l2_mbus_framefmt format; + unsigned int max_dist_match = (unsigned int)-1; + unsigned int max_dist_other = (unsigned int)-1; + + /* + * Find the mode with the closest image size. The distance between + * image sizes is the size in pixels of the non-overlapping regions + * between the requested size and the frame-specified size. + * + * Store both the closest mode that matches the requested format, and + * the closest mode for all other formats. The best match is returned + * if found, otherwise the best mode with a non-matching format is + * returned. + */ + for (; *list; list++) { + unsigned int dist; + + if ((*list)->type != ET8EK8_REGLIST_MODE) + continue; + + et8ek8_reglist_to_mbus(*list, &format); + + dist = min(fmt->width, format.width) + * min(fmt->height, format.height); + dist = format.width * format.height + + fmt->width * fmt->height - 2 * dist; + + + if (fmt->code == format.code) { + if (dist < max_dist_match || !best_match) { + best_match = *list; + max_dist_match = dist; + } + } else { + if (dist < max_dist_other || !best_other) { + best_other = *list; + max_dist_other = dist; + } + } + } + + return best_match ? best_match : best_other; +} + +#define TIMEPERFRAME_AVG_FPS(t) \ + (((t).denominator + ((t).numerator >> 1)) / (t).numerator) + +static struct et8ek8_reglist *et8ek8_reglist_find_mode_ival( + struct et8ek8_meta_reglist *meta, + struct et8ek8_reglist *current_reglist, + struct v4l2_fract *timeperframe) +{ + int fps = TIMEPERFRAME_AVG_FPS(*timeperframe); + struct et8ek8_reglist **list = et8ek8_reglist_first(meta); + struct et8ek8_mode *current_mode = ¤t_reglist->mode; + + for (; *list; list++) { + struct et8ek8_mode *mode = &(*list)->mode; + + if ((*list)->type != ET8EK8_REGLIST_MODE) + continue; + + if (mode->window_width != current_mode->window_width || + mode->window_height != current_mode->window_height) + continue; + + if (TIMEPERFRAME_AVG_FPS(mode->timeperframe) == fps) + return *list; + } + + return NULL; +} + +static int et8ek8_reglist_cmp(const void *a, const void *b) +{ + const struct et8ek8_reglist **list1 = (const struct et8ek8_reglist **)a, + **list2 = (const struct et8ek8_reglist **)b; + + /* Put real modes in the beginning. */ + if ((*list1)->type == ET8EK8_REGLIST_MODE && + (*list2)->type != ET8EK8_REGLIST_MODE) + return -1; + if ((*list1)->type != ET8EK8_REGLIST_MODE && + (*list2)->type == ET8EK8_REGLIST_MODE) + return 1; + + /* Descending width. */ + if ((*list1)->mode.window_width > (*list2)->mode.window_width) + return -1; + if ((*list1)->mode.window_width < (*list2)->mode.window_width) + return 1; + + if ((*list1)->mode.window_height > (*list2)->mode.window_height) + return -1; + if ((*list1)->mode.window_height < (*list2)->mode.window_height) + return 1; + + return 0; +} + +static int et8ek8_reglist_import(struct i2c_client *client, + struct et8ek8_meta_reglist *meta) +{ + int nlists = 0, i; + + dev_info(&client->dev, "meta_reglist version %s\n", meta->version); + + while (meta->reglist[nlists].ptr) + nlists++; + + if (!nlists) + return -EINVAL; + + sort(&meta->reglist[0].ptr, nlists, sizeof(meta->reglist[0].ptr), + et8ek8_reglist_cmp, NULL); + + i = nlists; + nlists = 0; + + while (i--) { + struct et8ek8_reglist *list; + + list = meta->reglist[nlists].ptr; + + dev_dbg(&client->dev, + "%s: type %d\tw %d\th %d\tfmt %x\tival %d/%d\tptr %p\n", + __func__, + list->type, + list->mode.window_width, list->mode.window_height, + list->mode.pixel_format, + list->mode.timeperframe.numerator, + list->mode.timeperframe.denominator, + (void *)meta->reglist[nlists].ptr); + + nlists++; + } + + return 0; +} + +/* + * Return time of one row in microseconds, .8 fixed point format. + * If the sensor is not set to any mode, return zero. + */ +static int et8ek8_get_row_time(struct et8ek8_sensor *sensor) +{ + unsigned int clock; /* Pixel clock in Hz>>10 fixed point */ + unsigned int rt; /* Row time in .8 fixed point */ + + if (!sensor->current_reglist) + return 0; + + clock = sensor->current_reglist->mode.pixel_clock; + clock = (clock + (1 << 9)) >> 10; + rt = sensor->current_reglist->mode.width * (1000000 >> 2); + rt = (rt + (clock >> 1)) / clock; + + return rt; +} + +/* + * Convert exposure time `us' to rows. Modify `us' to make it to + * correspond to the actual exposure time. + */ +static int et8ek8_exposure_us_to_rows(struct et8ek8_sensor *sensor, u32 *us) +{ + unsigned int rows; /* Exposure value as written to HW (ie. rows) */ + unsigned int rt; /* Row time in .8 fixed point */ + + /* Assume that the maximum exposure time is at most ~8 s, + * and the maximum width (with blanking) ~8000 pixels. + * The formula here is in principle as simple as + * rows = exptime / 1e6 / width * pixel_clock + * but to get accurate results while coping with value ranges, + * have to do some fixed point math. + */ + + rt = et8ek8_get_row_time(sensor); + rows = ((*us << 8) + (rt >> 1)) / rt; + + if (rows > sensor->current_reglist->mode.max_exp) + rows = sensor->current_reglist->mode.max_exp; + + /* Set the exposure time to the rounded value */ + *us = (rt * rows + (1 << 7)) >> 8; + + return rows; +} + +/* + * Convert exposure time in rows to microseconds + */ +static int et8ek8_exposure_rows_to_us(struct et8ek8_sensor *sensor, int rows) +{ + return (et8ek8_get_row_time(sensor) * rows + (1 << 7)) >> 8; +} + +/* Called to change the V4L2 gain control value. This function + * rounds and clamps the given value and updates the V4L2 control value. + * If power is on, also updates the sensor analog and digital gains. + * gain is in 0.1 EV (exposure value) units. + */ +static int et8ek8_set_gain(struct et8ek8_sensor *sensor, s32 gain) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct et8ek8_gain new; + int r; + + new = et8ek8_gain_table[gain]; + + /* FIXME: optimise I2C writes! */ + r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, + 0x124a, new.analog >> 8); + if (r) + return r; + r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, + 0x1249, new.analog & 0xff); + if (r) + return r; + + r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, + 0x124d, new.digital >> 8); + if (r) + return r; + r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, + 0x124c, new.digital & 0xff); + + return r; +} + +static int et8ek8_set_test_pattern(struct et8ek8_sensor *sensor, s32 mode) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int cbh_mode, cbv_mode, tp_mode, din_sw, r1420, rval; + + /* Values for normal mode */ + cbh_mode = 0; + cbv_mode = 0; + tp_mode = 0; + din_sw = 0x00; + r1420 = 0xF0; + + if (mode) { + /* Test pattern mode */ + if (mode < 5) { + cbh_mode = 1; + cbv_mode = 1; + tp_mode = mode + 3; + } else { + cbh_mode = 0; + cbv_mode = 0; + tp_mode = mode - 4 + 3; + } + + din_sw = 0x01; + r1420 = 0xE0; + } + + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x111B, + tp_mode << 4); + if (rval) + goto out; + + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1121, + cbh_mode << 7); + if (rval) + goto out; + + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1124, + cbv_mode << 7); + if (rval) + goto out; + + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x112C, din_sw); + if (rval) + goto out; + + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1420, r1420); + +out: + return rval; +} + +/* ----------------------------------------------------------------------------- + * V4L2 controls + */ + +static int et8ek8_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct et8ek8_sensor *sensor = + container_of(ctrl->handler, struct et8ek8_sensor, ctrl_handler); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int uninitialized_var(rows); + + if (ctrl->id == V4L2_CID_EXPOSURE) + rows = et8ek8_exposure_us_to_rows(sensor, (u32 *)&ctrl->val); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + return et8ek8_set_gain(sensor, ctrl->val); + + case V4L2_CID_EXPOSURE: + return et8ek8_i2c_write_reg(client, ET8EK8_REG_16BIT, 0x1243, + swab16(rows)); + + case V4L2_CID_TEST_PATTERN: + return et8ek8_set_test_pattern(sensor, ctrl->val); + + case V4L2_CID_PIXEL_RATE: + /* For v4l2_ctrl_s_ctrl_int64() used internally. */ + return 0; + + default: + return -EINVAL; + } +} + +static const struct v4l2_ctrl_ops et8ek8_ctrl_ops = { + .s_ctrl = et8ek8_set_ctrl, +}; + +static const char * const et8ek8_test_pattern_menu[] = { + "Normal", + "Vertical colorbar", + "Horizontal colorbar", + "Scale", + "Ramp", + "Small vertical colorbar", + "Small horizontal colorbar", + "Small scale", + "Small ramp", +}; + +static int et8ek8_init_controls(struct et8ek8_sensor *sensor) +{ + u32 min, max; + + v4l2_ctrl_handler_init(&sensor->ctrl_handler, 4); + + /* V4L2_CID_GAIN */ + v4l2_ctrl_new_std(&sensor->ctrl_handler, &et8ek8_ctrl_ops, + V4L2_CID_GAIN, 0, ARRAY_SIZE(et8ek8_gain_table) - 1, + 1, 0); + + /* V4L2_CID_EXPOSURE */ + min = et8ek8_exposure_rows_to_us(sensor, 1); + max = et8ek8_exposure_rows_to_us(sensor, + sensor->current_reglist->mode.max_exp); + sensor->exposure = + v4l2_ctrl_new_std(&sensor->ctrl_handler, &et8ek8_ctrl_ops, + V4L2_CID_EXPOSURE, min, max, min, max); + + /* V4L2_CID_PIXEL_RATE */ + sensor->pixel_rate = + v4l2_ctrl_new_std(&sensor->ctrl_handler, &et8ek8_ctrl_ops, + V4L2_CID_PIXEL_RATE, 1, INT_MAX, 1, 1); + + /* V4L2_CID_TEST_PATTERN */ + v4l2_ctrl_new_std_menu_items(&sensor->ctrl_handler, + &et8ek8_ctrl_ops, V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(et8ek8_test_pattern_menu) - 1, + 0, 0, et8ek8_test_pattern_menu); + + if (sensor->ctrl_handler.error) + return sensor->ctrl_handler.error; + + sensor->subdev.ctrl_handler = &sensor->ctrl_handler; + + return 0; +} + +static void et8ek8_update_controls(struct et8ek8_sensor *sensor) +{ + struct v4l2_ctrl *ctrl = sensor->exposure; + struct et8ek8_mode *mode = &sensor->current_reglist->mode; + u32 min, max, pixel_rate; + static const int S = 8; + + min = et8ek8_exposure_rows_to_us(sensor, 1); + max = et8ek8_exposure_rows_to_us(sensor, mode->max_exp); + + /* + * Calculate average pixel clock per line. Assume buffers can spread + * the data over horizontal blanking time. Rounding upwards. + * Formula taken from stock Nokia N900 kernel. + */ + pixel_rate = ((mode->pixel_clock + (1 << S) - 1) >> S) + mode->width; + pixel_rate = mode->window_width * (pixel_rate - 1) / mode->width; + + v4l2_ctrl_lock(ctrl); + ctrl->minimum = min; + ctrl->maximum = max; + ctrl->step = min; + ctrl->default_value = max; + ctrl->val = max; + ctrl->cur.val = max; + __v4l2_ctrl_s_ctrl_int64(sensor->pixel_rate, pixel_rate << S); + v4l2_ctrl_unlock(ctrl); +} + +static int et8ek8_configure(struct et8ek8_sensor *sensor) +{ + struct v4l2_subdev *subdev = &sensor->subdev; + struct i2c_client *client = v4l2_get_subdevdata(subdev); + int rval; + + rval = et8ek8_i2c_write_regs(client, sensor->current_reglist->regs); + if (rval) + goto fail; + + /* Controls set while the power to the sensor is turned off are saved + * but not applied to the hardware. Now that we're about to start + * streaming apply all the current values to the hardware. + */ + rval = v4l2_ctrl_handler_setup(&sensor->ctrl_handler); + if (rval) + goto fail; + + return 0; + +fail: + dev_err(&client->dev, "sensor configuration failed\n"); + + return rval; +} + +static int et8ek8_stream_on(struct et8ek8_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + + return et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1252, 0xb0); +} + +static int et8ek8_stream_off(struct et8ek8_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + + return et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1252, 0x30); +} + +static int et8ek8_s_stream(struct v4l2_subdev *subdev, int streaming) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + int ret; + + if (!streaming) + return et8ek8_stream_off(sensor); + + ret = et8ek8_configure(sensor); + if (ret < 0) + return ret; + + return et8ek8_stream_on(sensor); +} + +/* -------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static int et8ek8_power_off(struct et8ek8_sensor *sensor) +{ + gpiod_set_value(sensor->reset, 0); + udelay(1); + + clk_disable_unprepare(sensor->ext_clk); + + return regulator_disable(sensor->vana); +} + +static int et8ek8_power_on(struct et8ek8_sensor *sensor) +{ + struct v4l2_subdev *subdev = &sensor->subdev; + struct i2c_client *client = v4l2_get_subdevdata(subdev); + unsigned int xclk_freq; + int val, rval; + + rval = regulator_enable(sensor->vana); + if (rval) { + dev_err(&client->dev, "failed to enable vana regulator\n"); + return rval; + } + + if (sensor->current_reglist) + xclk_freq = sensor->current_reglist->mode.ext_clock; + else + xclk_freq = sensor->xclk_freq; + + rval = clk_set_rate(sensor->ext_clk, xclk_freq); + if (rval < 0) { + dev_err(&client->dev, "unable to set extclk clock freq to %u\n", + xclk_freq); + goto out; + } + rval = clk_prepare_enable(sensor->ext_clk); + if (rval < 0) { + dev_err(&client->dev, "failed to enable extclk\n"); + goto out; + } + + if (rval) + goto out; + + udelay(10); /* I wish this is a good value */ + + gpiod_set_value(sensor->reset, 1); + + msleep(5000 * 1000 / xclk_freq + 1); /* Wait 5000 cycles */ + + rval = et8ek8_i2c_reglist_find_write(client, &meta_reglist, + ET8EK8_REGLIST_POWERON); + if (rval) + goto out; + +#ifdef USE_CRC + rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT, 0x1263, &val); + if (rval) + goto out; +#if USE_CRC /* TODO get crc setting from DT */ + val |= BIT(4); +#else + val &= ~BIT(4); +#endif + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1263, val); + if (rval) + goto out; +#endif + +out: + if (rval) + et8ek8_power_off(sensor); + + return rval; +} + +/* -------------------------------------------------------------------------- + * V4L2 subdev video operations + */ +#define MAX_FMTS 4 +static int et8ek8_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct et8ek8_reglist **list = + et8ek8_reglist_first(&meta_reglist); + u32 pixelformat[MAX_FMTS]; + int npixelformat = 0; + + if (code->index >= MAX_FMTS) + return -EINVAL; + + for (; *list; list++) { + struct et8ek8_mode *mode = &(*list)->mode; + int i; + + if ((*list)->type != ET8EK8_REGLIST_MODE) + continue; + + for (i = 0; i < npixelformat; i++) { + if (pixelformat[i] == mode->pixel_format) + break; + } + if (i != npixelformat) + continue; + + if (code->index == npixelformat) { + if (mode->pixel_format == V4L2_PIX_FMT_SGRBG10DPCM8) + code->code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8; + else + code->code = MEDIA_BUS_FMT_SGRBG10_1X10; + return 0; + } + + pixelformat[npixelformat] = mode->pixel_format; + npixelformat++; + } + + return -EINVAL; +} + +static int et8ek8_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct et8ek8_reglist **list = + et8ek8_reglist_first(&meta_reglist); + struct v4l2_mbus_framefmt format; + int cmp_width = INT_MAX; + int cmp_height = INT_MAX; + int index = fse->index; + + for (; *list; list++) { + if ((*list)->type != ET8EK8_REGLIST_MODE) + continue; + + et8ek8_reglist_to_mbus(*list, &format); + if (fse->code != format.code) + continue; + + /* Assume that the modes are grouped by frame size. */ + if (format.width == cmp_width && format.height == cmp_height) + continue; + + cmp_width = format.width; + cmp_height = format.height; + + if (index-- == 0) { + fse->min_width = format.width; + fse->min_height = format.height; + fse->max_width = format.width; + fse->max_height = format.height; + return 0; + } + } + + return -EINVAL; +} + +static int et8ek8_enum_frame_ival(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_interval_enum *fie) +{ + struct et8ek8_reglist **list = + et8ek8_reglist_first(&meta_reglist); + struct v4l2_mbus_framefmt format; + int index = fie->index; + + for (; *list; list++) { + struct et8ek8_mode *mode = &(*list)->mode; + + if ((*list)->type != ET8EK8_REGLIST_MODE) + continue; + + et8ek8_reglist_to_mbus(*list, &format); + if (fie->code != format.code) + continue; + + if (fie->width != format.width || fie->height != format.height) + continue; + + if (index-- == 0) { + fie->interval = mode->timeperframe; + return 0; + } + } + + return -EINVAL; +} + +static struct v4l2_mbus_framefmt * +__et8ek8_get_pad_format(struct et8ek8_sensor *sensor, + struct v4l2_subdev_pad_config *cfg, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(&sensor->subdev, cfg, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->format; + default: + return NULL; + } +} + +static int et8ek8_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + struct v4l2_mbus_framefmt *format; + + format = __et8ek8_get_pad_format(sensor, cfg, fmt->pad, fmt->which); + if (!format) + return -EINVAL; + + fmt->format = *format; + + return 0; +} + +static int et8ek8_set_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + struct v4l2_mbus_framefmt *format; + struct et8ek8_reglist *reglist; + + format = __et8ek8_get_pad_format(sensor, cfg, fmt->pad, fmt->which); + if (!format) + return -EINVAL; + + reglist = et8ek8_reglist_find_mode_fmt(&meta_reglist, &fmt->format); + et8ek8_reglist_to_mbus(reglist, &fmt->format); + *format = fmt->format; + + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + sensor->current_reglist = reglist; + et8ek8_update_controls(sensor); + } + + return 0; +} + +static int et8ek8_get_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + + memset(fi, 0, sizeof(*fi)); + fi->interval = sensor->current_reglist->mode.timeperframe; + + return 0; +} + +static int et8ek8_set_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + struct et8ek8_reglist *reglist; + + reglist = et8ek8_reglist_find_mode_ival(&meta_reglist, + sensor->current_reglist, + &fi->interval); + + if (!reglist) + return -EINVAL; + + if (sensor->current_reglist->mode.ext_clock != reglist->mode.ext_clock) + return -EINVAL; + + sensor->current_reglist = reglist; + et8ek8_update_controls(sensor); + + return 0; +} + +static int et8ek8_g_priv_mem(struct v4l2_subdev *subdev) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + unsigned int length = ET8EK8_PRIV_MEM_SIZE; + unsigned int offset = 0; + u8 *ptr = sensor->priv_mem; + int rval = 0; + + /* Read the EEPROM window-by-window, each window 8 bytes */ + do { + u8 buffer[PRIV_MEM_WIN_SIZE]; + struct i2c_msg msg; + int bytes, i; + int ofs; + + /* Set the current window */ + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x0001, + 0xe0 | (offset >> 3)); + if (rval < 0) + return rval; + + /* Wait for status bit */ + for (i = 0; i < 1000; ++i) { + u32 status; + + rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT, + 0x0003, &status); + if (rval < 0) + return rval; + if (!(status & 0x08)) + break; + usleep_range(1000, 2000); + }; + + if (i == 1000) + return -EIO; + + /* Read window, 8 bytes at once, and copy to user space */ + ofs = offset & 0x07; /* Offset within this window */ + bytes = length + ofs > 8 ? 8-ofs : length; + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2; + msg.buf = buffer; + ofs += PRIV_MEM_START_REG; + buffer[0] = (u8)(ofs >> 8); + buffer[1] = (u8)(ofs & 0xFF); + + rval = i2c_transfer(client->adapter, &msg, 1); + if (rval < 0) + return rval; + + mdelay(ET8EK8_I2C_DELAY); + msg.addr = client->addr; + msg.len = bytes; + msg.flags = I2C_M_RD; + msg.buf = buffer; + memset(buffer, 0, sizeof(buffer)); + + rval = i2c_transfer(client->adapter, &msg, 1); + if (rval < 0) + return rval; + + rval = 0; + memcpy(ptr, buffer, bytes); + + length -= bytes; + offset += bytes; + ptr += bytes; + } while (length > 0); + + return rval; +} + +static int et8ek8_dev_init(struct v4l2_subdev *subdev) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + int rval, rev_l, rev_h; + + rval = et8ek8_power_on(sensor); + if (rval) { + dev_err(&client->dev, "could not power on\n"); + return rval; + } + + rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT, + REG_REVISION_NUMBER_L, &rev_l); + if (!rval) + rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT, + REG_REVISION_NUMBER_H, &rev_h); + if (rval) { + dev_err(&client->dev, "no et8ek8 sensor detected\n"); + goto out_poweroff; + } + + sensor->version = (rev_h << 8) + rev_l; + if (sensor->version != ET8EK8_REV_1 && sensor->version != ET8EK8_REV_2) + dev_info(&client->dev, + "unknown version 0x%x detected, continuing anyway\n", + sensor->version); + + rval = et8ek8_reglist_import(client, &meta_reglist); + if (rval) { + dev_err(&client->dev, + "invalid register list %s, import failed\n", + ET8EK8_NAME); + goto out_poweroff; + } + + sensor->current_reglist = et8ek8_reglist_find_type(&meta_reglist, + ET8EK8_REGLIST_MODE); + if (!sensor->current_reglist) { + dev_err(&client->dev, + "invalid register list %s, no mode found\n", + ET8EK8_NAME); + rval = -ENODEV; + goto out_poweroff; + } + + et8ek8_reglist_to_mbus(sensor->current_reglist, &sensor->format); + + rval = et8ek8_i2c_reglist_find_write(client, &meta_reglist, + ET8EK8_REGLIST_POWERON); + if (rval) { + dev_err(&client->dev, + "invalid register list %s, no POWERON mode found\n", + ET8EK8_NAME); + goto out_poweroff; + } + rval = et8ek8_stream_on(sensor); /* Needed to be able to read EEPROM */ + if (rval) + goto out_poweroff; + rval = et8ek8_g_priv_mem(subdev); + if (rval) + dev_warn(&client->dev, + "can not read OTP (EEPROM) memory from sensor\n"); + rval = et8ek8_stream_off(sensor); + if (rval) + goto out_poweroff; + + rval = et8ek8_power_off(sensor); + if (rval) + goto out_poweroff; + + return 0; + +out_poweroff: + et8ek8_power_off(sensor); + + return rval; +} + +/* -------------------------------------------------------------------------- + * sysfs attributes + */ +static ssize_t +et8ek8_priv_mem_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev)); + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + +#if PAGE_SIZE < ET8EK8_PRIV_MEM_SIZE +#error PAGE_SIZE too small! +#endif + + memcpy(buf, sensor->priv_mem, ET8EK8_PRIV_MEM_SIZE); + + return ET8EK8_PRIV_MEM_SIZE; +} +static DEVICE_ATTR(priv_mem, S_IRUGO, et8ek8_priv_mem_read, NULL); + +/* -------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +static int +et8ek8_registered(struct v4l2_subdev *subdev) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct v4l2_mbus_framefmt *format; + int rval; + + dev_dbg(&client->dev, "registered!"); + + rval = device_create_file(&client->dev, &dev_attr_priv_mem); + if (rval) { + dev_err(&client->dev, "could not register sysfs entry\n"); + return rval; + } + + rval = et8ek8_dev_init(subdev); + if (rval) + goto err_file; + + rval = et8ek8_init_controls(sensor); + if (rval) { + dev_err(&client->dev, "controls initialization failed\n"); + goto err_file; + } + + format = __et8ek8_get_pad_format(sensor, NULL, 0, + V4L2_SUBDEV_FORMAT_ACTIVE); + return 0; + +err_file: + device_remove_file(&client->dev, &dev_attr_priv_mem); + + return rval; +} + +static int __et8ek8_set_power(struct et8ek8_sensor *sensor, bool on) +{ + return on ? et8ek8_power_on(sensor) : et8ek8_power_off(sensor); +} + +static int et8ek8_set_power(struct v4l2_subdev *subdev, int on) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + int ret = 0; + + mutex_lock(&sensor->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (sensor->power_count == !on) { + ret = __et8ek8_set_power(sensor, !!on); + if (ret < 0) + goto done; + } + + /* Update the power count. */ + sensor->power_count += on ? 1 : -1; + WARN_ON(sensor->power_count < 0); + +done: + mutex_unlock(&sensor->power_lock); + + return ret; +} + +static int et8ek8_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct et8ek8_sensor *sensor = to_et8ek8_sensor(sd); + struct v4l2_mbus_framefmt *format; + struct et8ek8_reglist *reglist; + + reglist = et8ek8_reglist_find_type(&meta_reglist, ET8EK8_REGLIST_MODE); + format = __et8ek8_get_pad_format(sensor, fh->pad, 0, + V4L2_SUBDEV_FORMAT_TRY); + et8ek8_reglist_to_mbus(reglist, format); + + return et8ek8_set_power(sd, true); +} + +static int et8ek8_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return et8ek8_set_power(sd, false); +} + +static const struct v4l2_subdev_video_ops et8ek8_video_ops = { + .s_stream = et8ek8_s_stream, + .g_frame_interval = et8ek8_get_frame_interval, + .s_frame_interval = et8ek8_set_frame_interval, +}; + +static const struct v4l2_subdev_core_ops et8ek8_core_ops = { + .s_power = et8ek8_set_power, +}; + +static const struct v4l2_subdev_pad_ops et8ek8_pad_ops = { + .enum_mbus_code = et8ek8_enum_mbus_code, + .enum_frame_size = et8ek8_enum_frame_size, + .enum_frame_interval = et8ek8_enum_frame_ival, + .get_fmt = et8ek8_get_pad_format, + .set_fmt = et8ek8_set_pad_format, +}; + +static const struct v4l2_subdev_ops et8ek8_ops = { + .core = &et8ek8_core_ops, + .video = &et8ek8_video_ops, + .pad = &et8ek8_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops et8ek8_internal_ops = { + .registered = et8ek8_registered, + .open = et8ek8_open, + .close = et8ek8_close, +}; + +/* -------------------------------------------------------------------------- + * I2C driver + */ +#ifdef CONFIG_PM + +static int et8ek8_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + + if (!sensor->power_count) + return 0; + + return __et8ek8_set_power(sensor, false); +} + +static int et8ek8_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + + if (!sensor->power_count) + return 0; + + return __et8ek8_set_power(sensor, true); +} + +#else + +#define et8ek8_suspend NULL +#define et8ek8_resume NULL + +#endif /* CONFIG_PM */ + +static int et8ek8_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct et8ek8_sensor *sensor; + struct device *dev = &client->dev; + int ret; + + sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + sensor->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(sensor->reset)) { + dev_dbg(&client->dev, "could not request reset gpio\n"); + return PTR_ERR(sensor->reset); + } + + sensor->vana = devm_regulator_get(dev, "vana"); + if (IS_ERR(sensor->vana)) { + dev_err(&client->dev, "could not get regulator for vana\n"); + return PTR_ERR(sensor->vana); + } + + sensor->ext_clk = devm_clk_get(dev, NULL); + if (IS_ERR(sensor->ext_clk)) { + dev_err(&client->dev, "could not get clock\n"); + return PTR_ERR(sensor->ext_clk); + } + + ret = of_property_read_u32(dev->of_node, "clock-frequency", + &sensor->xclk_freq); + if (ret) { + dev_warn(dev, "can't get clock-frequency\n"); + return ret; + } + + mutex_init(&sensor->power_lock); + + v4l2_i2c_subdev_init(&sensor->subdev, client, &et8ek8_ops); + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sensor->subdev.internal_ops = &et8ek8_internal_ops; + + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_pads_init(&sensor->subdev.entity, 1, &sensor->pad); + if (ret < 0) { + dev_err(&client->dev, "media entity init failed!\n"); + return ret; + } + + ret = v4l2_async_register_subdev(&sensor->subdev); + if (ret < 0) { + media_entity_cleanup(&sensor->subdev.entity); + return ret; + } + + dev_dbg(dev, "initialized!\n"); + + return 0; +} + +static int __exit et8ek8_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev); + + if (sensor->power_count) { + gpiod_set_value(sensor->reset, 0); + clk_disable_unprepare(sensor->ext_clk); + sensor->power_count = 0; + } + + v4l2_device_unregister_subdev(&sensor->subdev); + device_remove_file(&client->dev, &dev_attr_priv_mem); + v4l2_ctrl_handler_free(&sensor->ctrl_handler); + media_entity_cleanup(&sensor->subdev.entity); + + return 0; +} + +static const struct of_device_id et8ek8_of_table[] = { + { .compatible = "toshiba,et8ek8" }, + { }, +}; + +static const struct i2c_device_id et8ek8_id_table[] = { + { ET8EK8_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, et8ek8_id_table); + +static const struct dev_pm_ops et8ek8_pm_ops = { + .suspend = et8ek8_suspend, + .resume = et8ek8_resume, +}; + +static struct i2c_driver et8ek8_i2c_driver = { + .driver = { + .name = ET8EK8_NAME, + .pm = &et8ek8_pm_ops, + .of_match_table = et8ek8_of_table, + }, + .probe = et8ek8_probe, + .remove = __exit_p(et8ek8_remove), + .id_table = et8ek8_id_table, +}; + +module_i2c_driver(et8ek8_i2c_driver); + +MODULE_AUTHOR("Sakari Ailus "); +MODULE_DESCRIPTION("Toshiba ET8EK8 camera sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/et8ek8/et8ek8_mode.c b/drivers/media/i2c/et8ek8/et8ek8_mode.c new file mode 100644 index 0000000..8ab17eb --- /dev/null +++ b/drivers/media/i2c/et8ek8/et8ek8_mode.c @@ -0,0 +1,590 @@ +/* + * et8ek8_mode.c + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Sakari Ailus + * Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include "et8ek8_reg.h" + +/* + * + * Stingray sensor mode settings for Scooby + * + * + */ + +/* Mode1_poweron_Mode2_16VGA_2592x1968_12.07fps */ +static struct et8ek8_reglist mode1_poweron_mode2_16vga_2592x1968_12_07fps = { +/* (without the +1) + * SPCK = 80 MHz + * CCP2 = 640 MHz + * VCO = 640 MHz + * VCOUNT = 84 (2016) + * HCOUNT = 137 (3288) + * CKREF_DIV = 2 + * CKVAR_DIV = 200 + * VCO_DIV = 0 + * SPCK_DIV = 7 + * MRCK_DIV = 7 + * LVDSCK_DIV = 0 + */ + .type = ET8EK8_REGLIST_POWERON, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 3288, + .height = 2016, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 2592, + .window_height = 1968, + .pixel_clock = 80000000, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 1207 + }, + .max_exp = 2012, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10, + .sensitivity = 65536 + }, + .regs = { + /* Need to set firstly */ + { ET8EK8_REG_8BIT, 0x126C, 0xCC }, + /* Strobe and Data of CCP2 delay are minimized. */ + { ET8EK8_REG_8BIT, 0x1269, 0x00 }, + /* Refined value of Min H_COUNT */ + { ET8EK8_REG_8BIT, 0x1220, 0x89 }, + /* Frequency of SPCK setting (SPCK=MRCK) */ + { ET8EK8_REG_8BIT, 0x123A, 0x07 }, + { ET8EK8_REG_8BIT, 0x1241, 0x94 }, + { ET8EK8_REG_8BIT, 0x1242, 0x02 }, + { ET8EK8_REG_8BIT, 0x124B, 0x00 }, + { ET8EK8_REG_8BIT, 0x1255, 0xFF }, + { ET8EK8_REG_8BIT, 0x1256, 0x9F }, + { ET8EK8_REG_8BIT, 0x1258, 0x00 }, + /* From parallel out to serial out */ + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, + /* From w/ embeded data to w/o embeded data */ + { ET8EK8_REG_8BIT, 0x125E, 0xC0 }, + /* CCP2 out is from STOP to ACTIVE */ + { ET8EK8_REG_8BIT, 0x1263, 0x98 }, + { ET8EK8_REG_8BIT, 0x1268, 0xC6 }, + { ET8EK8_REG_8BIT, 0x1434, 0x00 }, + { ET8EK8_REG_8BIT, 0x1163, 0x44 }, + { ET8EK8_REG_8BIT, 0x1166, 0x29 }, + { ET8EK8_REG_8BIT, 0x1140, 0x02 }, + { ET8EK8_REG_8BIT, 0x1011, 0x24 }, + { ET8EK8_REG_8BIT, 0x1151, 0x80 }, + { ET8EK8_REG_8BIT, 0x1152, 0x23 }, + /* Initial setting for improvement2 of lower frequency noise */ + { ET8EK8_REG_8BIT, 0x1014, 0x05 }, + { ET8EK8_REG_8BIT, 0x1033, 0x06 }, + { ET8EK8_REG_8BIT, 0x1034, 0x79 }, + { ET8EK8_REG_8BIT, 0x1423, 0x3F }, + { ET8EK8_REG_8BIT, 0x1424, 0x3F }, + { ET8EK8_REG_8BIT, 0x1426, 0x00 }, + /* Switch of Preset-White-balance (0d:disable / 1d:enable) */ + { ET8EK8_REG_8BIT, 0x1439, 0x00 }, + /* Switch of blemish correction (0d:disable / 1d:enable) */ + { ET8EK8_REG_8BIT, 0x161F, 0x60 }, + /* Switch of auto noise correction (0d:disable / 1d:enable) */ + { ET8EK8_REG_8BIT, 0x1634, 0x00 }, + { ET8EK8_REG_8BIT, 0x1646, 0x00 }, + { ET8EK8_REG_8BIT, 0x1648, 0x00 }, + { ET8EK8_REG_8BIT, 0x113E, 0x01 }, + { ET8EK8_REG_8BIT, 0x113F, 0x22 }, + { ET8EK8_REG_8BIT, 0x1239, 0x64 }, + { ET8EK8_REG_8BIT, 0x1238, 0x02 }, + { ET8EK8_REG_8BIT, 0x123B, 0x70 }, + { ET8EK8_REG_8BIT, 0x123A, 0x07 }, + { ET8EK8_REG_8BIT, 0x121B, 0x64 }, + { ET8EK8_REG_8BIT, 0x121D, 0x64 }, + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, + { ET8EK8_REG_8BIT, 0x1220, 0x89 }, + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, + { ET8EK8_REG_8BIT, 0x1222, 0x54 }, + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */ + { ET8EK8_REG_TERM, 0, 0} + } +}; + +/* Mode1_16VGA_2592x1968_13.12fps_DPCM10-8 */ +static struct et8ek8_reglist mode1_16vga_2592x1968_13_12fps_dpcm10_8 = { +/* (without the +1) + * SPCK = 80 MHz + * CCP2 = 560 MHz + * VCO = 560 MHz + * VCOUNT = 84 (2016) + * HCOUNT = 128 (3072) + * CKREF_DIV = 2 + * CKVAR_DIV = 175 + * VCO_DIV = 0 + * SPCK_DIV = 6 + * MRCK_DIV = 7 + * LVDSCK_DIV = 0 + */ + .type = ET8EK8_REGLIST_MODE, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 3072, + .height = 2016, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 2592, + .window_height = 1968, + .pixel_clock = 80000000, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 1292 + }, + .max_exp = 2012, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10DPCM8, + .sensitivity = 65536 + }, + .regs = { + { ET8EK8_REG_8BIT, 0x1239, 0x57 }, + { ET8EK8_REG_8BIT, 0x1238, 0x82 }, + { ET8EK8_REG_8BIT, 0x123B, 0x70 }, + { ET8EK8_REG_8BIT, 0x123A, 0x06 }, + { ET8EK8_REG_8BIT, 0x121B, 0x64 }, + { ET8EK8_REG_8BIT, 0x121D, 0x64 }, + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, + { ET8EK8_REG_8BIT, 0x1220, 0x80 }, /* <-changed to v14 7E->80 */ + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, + { ET8EK8_REG_8BIT, 0x1222, 0x54 }, + { ET8EK8_REG_8BIT, 0x125D, 0x83 }, /* CCP_LVDS_MODE/ */ + { ET8EK8_REG_TERM, 0, 0} + } +}; + +/* Mode3_4VGA_1296x984_29.99fps_DPCM10-8 */ +static struct et8ek8_reglist mode3_4vga_1296x984_29_99fps_dpcm10_8 = { +/* (without the +1) + * SPCK = 96.5333333333333 MHz + * CCP2 = 579.2 MHz + * VCO = 579.2 MHz + * VCOUNT = 84 (2016) + * HCOUNT = 133 (3192) + * CKREF_DIV = 2 + * CKVAR_DIV = 181 + * VCO_DIV = 0 + * SPCK_DIV = 5 + * MRCK_DIV = 7 + * LVDSCK_DIV = 0 + */ + .type = ET8EK8_REGLIST_MODE, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 3192, + .height = 1008, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 1296, + .window_height = 984, + .pixel_clock = 96533333, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 3000 + }, + .max_exp = 1004, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10DPCM8, + .sensitivity = 65536 + }, + .regs = { + { ET8EK8_REG_8BIT, 0x1239, 0x5A }, + { ET8EK8_REG_8BIT, 0x1238, 0x82 }, + { ET8EK8_REG_8BIT, 0x123B, 0x70 }, + { ET8EK8_REG_8BIT, 0x123A, 0x05 }, + { ET8EK8_REG_8BIT, 0x121B, 0x63 }, + { ET8EK8_REG_8BIT, 0x1220, 0x85 }, + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, + { ET8EK8_REG_8BIT, 0x1222, 0x54 }, + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, + { ET8EK8_REG_8BIT, 0x121D, 0x63 }, + { ET8EK8_REG_8BIT, 0x125D, 0x83 }, /* CCP_LVDS_MODE/ */ + { ET8EK8_REG_TERM, 0, 0} + } +}; + +/* Mode4_SVGA_864x656_29.88fps */ +static struct et8ek8_reglist mode4_svga_864x656_29_88fps = { +/* (without the +1) + * SPCK = 80 MHz + * CCP2 = 320 MHz + * VCO = 640 MHz + * VCOUNT = 84 (2016) + * HCOUNT = 166 (3984) + * CKREF_DIV = 2 + * CKVAR_DIV = 200 + * VCO_DIV = 0 + * SPCK_DIV = 7 + * MRCK_DIV = 7 + * LVDSCK_DIV = 1 + */ + .type = ET8EK8_REGLIST_MODE, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 3984, + .height = 672, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 864, + .window_height = 656, + .pixel_clock = 80000000, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 2988 + }, + .max_exp = 668, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10, + .sensitivity = 65536 + }, + .regs = { + { ET8EK8_REG_8BIT, 0x1239, 0x64 }, + { ET8EK8_REG_8BIT, 0x1238, 0x02 }, + { ET8EK8_REG_8BIT, 0x123B, 0x71 }, + { ET8EK8_REG_8BIT, 0x123A, 0x07 }, + { ET8EK8_REG_8BIT, 0x121B, 0x62 }, + { ET8EK8_REG_8BIT, 0x121D, 0x62 }, + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, + { ET8EK8_REG_8BIT, 0x1220, 0xA6 }, + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, + { ET8EK8_REG_8BIT, 0x1222, 0x54 }, + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */ + { ET8EK8_REG_TERM, 0, 0} + } +}; + +/* Mode5_VGA_648x492_29.93fps */ +static struct et8ek8_reglist mode5_vga_648x492_29_93fps = { +/* (without the +1) + * SPCK = 80 MHz + * CCP2 = 320 MHz + * VCO = 640 MHz + * VCOUNT = 84 (2016) + * HCOUNT = 221 (5304) + * CKREF_DIV = 2 + * CKVAR_DIV = 200 + * VCO_DIV = 0 + * SPCK_DIV = 7 + * MRCK_DIV = 7 + * LVDSCK_DIV = 1 + */ + .type = ET8EK8_REGLIST_MODE, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 5304, + .height = 504, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 648, + .window_height = 492, + .pixel_clock = 80000000, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 2993 + }, + .max_exp = 500, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10, + .sensitivity = 65536 + }, + .regs = { + { ET8EK8_REG_8BIT, 0x1239, 0x64 }, + { ET8EK8_REG_8BIT, 0x1238, 0x02 }, + { ET8EK8_REG_8BIT, 0x123B, 0x71 }, + { ET8EK8_REG_8BIT, 0x123A, 0x07 }, + { ET8EK8_REG_8BIT, 0x121B, 0x61 }, + { ET8EK8_REG_8BIT, 0x121D, 0x61 }, + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, + { ET8EK8_REG_8BIT, 0x1220, 0xDD }, + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, + { ET8EK8_REG_8BIT, 0x1222, 0x54 }, + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */ + { ET8EK8_REG_TERM, 0, 0} + } +}; + +/* Mode2_16VGA_2592x1968_3.99fps */ +static struct et8ek8_reglist mode2_16vga_2592x1968_3_99fps = { +/* (without the +1) + * SPCK = 80 MHz + * CCP2 = 640 MHz + * VCO = 640 MHz + * VCOUNT = 254 (6096) + * HCOUNT = 137 (3288) + * CKREF_DIV = 2 + * CKVAR_DIV = 200 + * VCO_DIV = 0 + * SPCK_DIV = 7 + * MRCK_DIV = 7 + * LVDSCK_DIV = 0 + */ + .type = ET8EK8_REGLIST_MODE, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 3288, + .height = 6096, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 2592, + .window_height = 1968, + .pixel_clock = 80000000, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 399 + }, + .max_exp = 6092, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10, + .sensitivity = 65536 + }, + .regs = { + { ET8EK8_REG_8BIT, 0x1239, 0x64 }, + { ET8EK8_REG_8BIT, 0x1238, 0x02 }, + { ET8EK8_REG_8BIT, 0x123B, 0x70 }, + { ET8EK8_REG_8BIT, 0x123A, 0x07 }, + { ET8EK8_REG_8BIT, 0x121B, 0x64 }, + { ET8EK8_REG_8BIT, 0x121D, 0x64 }, + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, + { ET8EK8_REG_8BIT, 0x1220, 0x89 }, + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, + { ET8EK8_REG_8BIT, 0x1222, 0xFE }, + { ET8EK8_REG_TERM, 0, 0} + } +}; + +/* Mode_648x492_5fps */ +static struct et8ek8_reglist mode_648x492_5fps = { +/* (without the +1) + * SPCK = 13.3333333333333 MHz + * CCP2 = 53.3333333333333 MHz + * VCO = 640 MHz + * VCOUNT = 84 (2016) + * HCOUNT = 221 (5304) + * CKREF_DIV = 2 + * CKVAR_DIV = 200 + * VCO_DIV = 5 + * SPCK_DIV = 7 + * MRCK_DIV = 7 + * LVDSCK_DIV = 1 + */ + .type = ET8EK8_REGLIST_MODE, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 5304, + .height = 504, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 648, + .window_height = 492, + .pixel_clock = 13333333, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 499 + }, + .max_exp = 500, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10, + .sensitivity = 65536 + }, + .regs = { + { ET8EK8_REG_8BIT, 0x1239, 0x64 }, + { ET8EK8_REG_8BIT, 0x1238, 0x02 }, + { ET8EK8_REG_8BIT, 0x123B, 0x71 }, + { ET8EK8_REG_8BIT, 0x123A, 0x57 }, + { ET8EK8_REG_8BIT, 0x121B, 0x61 }, + { ET8EK8_REG_8BIT, 0x121D, 0x61 }, + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, + { ET8EK8_REG_8BIT, 0x1220, 0xDD }, + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, + { ET8EK8_REG_8BIT, 0x1222, 0x54 }, + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */ + { ET8EK8_REG_TERM, 0, 0} + } +}; + +/* Mode3_4VGA_1296x984_5fps */ +static struct et8ek8_reglist mode3_4vga_1296x984_5fps = { +/* (without the +1) + * SPCK = 49.4 MHz + * CCP2 = 395.2 MHz + * VCO = 790.4 MHz + * VCOUNT = 250 (6000) + * HCOUNT = 137 (3288) + * CKREF_DIV = 2 + * CKVAR_DIV = 247 + * VCO_DIV = 1 + * SPCK_DIV = 7 + * MRCK_DIV = 7 + * LVDSCK_DIV = 0 + */ + .type = ET8EK8_REGLIST_MODE, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 3288, + .height = 3000, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 1296, + .window_height = 984, + .pixel_clock = 49400000, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 501 + }, + .max_exp = 2996, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10, + .sensitivity = 65536 + }, + .regs = { + { ET8EK8_REG_8BIT, 0x1239, 0x7B }, + { ET8EK8_REG_8BIT, 0x1238, 0x82 }, + { ET8EK8_REG_8BIT, 0x123B, 0x70 }, + { ET8EK8_REG_8BIT, 0x123A, 0x17 }, + { ET8EK8_REG_8BIT, 0x121B, 0x63 }, + { ET8EK8_REG_8BIT, 0x121D, 0x63 }, + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, + { ET8EK8_REG_8BIT, 0x1220, 0x89 }, + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, + { ET8EK8_REG_8BIT, 0x1222, 0xFA }, + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */ + { ET8EK8_REG_TERM, 0, 0} + } +}; + +/* Mode_4VGA_1296x984_25fps_DPCM10-8 */ +static struct et8ek8_reglist mode_4vga_1296x984_25fps_dpcm10_8 = { +/* (without the +1) + * SPCK = 84.2666666666667 MHz + * CCP2 = 505.6 MHz + * VCO = 505.6 MHz + * VCOUNT = 88 (2112) + * HCOUNT = 133 (3192) + * CKREF_DIV = 2 + * CKVAR_DIV = 158 + * VCO_DIV = 0 + * SPCK_DIV = 5 + * MRCK_DIV = 7 + * LVDSCK_DIV = 0 + */ + .type = ET8EK8_REGLIST_MODE, + .mode = { + .sensor_width = 2592, + .sensor_height = 1968, + .sensor_window_origin_x = 0, + .sensor_window_origin_y = 0, + .sensor_window_width = 2592, + .sensor_window_height = 1968, + .width = 3192, + .height = 1056, + .window_origin_x = 0, + .window_origin_y = 0, + .window_width = 1296, + .window_height = 984, + .pixel_clock = 84266667, + .ext_clock = 9600000, + .timeperframe = { + .numerator = 100, + .denominator = 2500 + }, + .max_exp = 1052, + /* .max_gain = 0, */ + .pixel_format = V4L2_PIX_FMT_SGRBG10DPCM8, + .sensitivity = 65536 + }, + .regs = { + { ET8EK8_REG_8BIT, 0x1239, 0x4F }, /* */ + { ET8EK8_REG_8BIT, 0x1238, 0x02 }, /* */ + { ET8EK8_REG_8BIT, 0x123B, 0x70 }, /* */ + { ET8EK8_REG_8BIT, 0x123A, 0x05 }, /* */ + { ET8EK8_REG_8BIT, 0x121B, 0x63 }, /* */ + { ET8EK8_REG_8BIT, 0x1220, 0x85 }, /* */ + { ET8EK8_REG_8BIT, 0x1221, 0x00 }, /* */ + { ET8EK8_REG_8BIT, 0x1222, 0x58 }, /* */ + { ET8EK8_REG_8BIT, 0x1223, 0x00 }, /* */ + { ET8EK8_REG_8BIT, 0x121D, 0x63 }, /* */ + { ET8EK8_REG_8BIT, 0x125D, 0x83 }, /* */ + { ET8EK8_REG_TERM, 0, 0} + } +}; + +struct et8ek8_meta_reglist meta_reglist = { + .version = "V14 03-June-2008", + .reglist = { + { .ptr = &mode1_poweron_mode2_16vga_2592x1968_12_07fps }, + { .ptr = &mode1_16vga_2592x1968_13_12fps_dpcm10_8 }, + { .ptr = &mode3_4vga_1296x984_29_99fps_dpcm10_8 }, + { .ptr = &mode4_svga_864x656_29_88fps }, + { .ptr = &mode5_vga_648x492_29_93fps }, + { .ptr = &mode2_16vga_2592x1968_3_99fps }, + { .ptr = &mode_648x492_5fps }, + { .ptr = &mode3_4vga_1296x984_5fps }, + { .ptr = &mode_4vga_1296x984_25fps_dpcm10_8 }, + { .ptr = 0 } + } +}; diff --git a/drivers/media/i2c/et8ek8/et8ek8_reg.h b/drivers/media/i2c/et8ek8/et8ek8_reg.h new file mode 100644 index 0000000..ec1e5f9 --- /dev/null +++ b/drivers/media/i2c/et8ek8/et8ek8_reg.h @@ -0,0 +1,96 @@ +/* + * et8ek8.h + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Sakari Ailus + * Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef ET8EK8REGS_H +#define ET8EK8REGS_H + +#include +#include +#include +#include + +struct v4l2_mbus_framefmt; +struct v4l2_subdev_pad_mbus_code_enum; + +struct et8ek8_mode { + /* Physical sensor resolution and current image window */ + __u16 sensor_width; + __u16 sensor_height; + __u16 sensor_window_origin_x; + __u16 sensor_window_origin_y; + __u16 sensor_window_width; + __u16 sensor_window_height; + + /* Image data coming from sensor (after scaling) */ + __u16 width; + __u16 height; + __u16 window_origin_x; + __u16 window_origin_y; + __u16 window_width; + __u16 window_height; + + __u32 pixel_clock; /* in Hz */ + __u32 ext_clock; /* in Hz */ + struct v4l2_fract timeperframe; + __u32 max_exp; /* Maximum exposure value */ + __u32 pixel_format; /* V4L2_PIX_FMT_xxx */ + __u32 sensitivity; /* 16.16 fixed point */ +}; + +#define ET8EK8_REG_8BIT 1 +#define ET8EK8_REG_16BIT 2 +#define ET8EK8_REG_DELAY 100 +#define ET8EK8_REG_TERM 0xff +struct et8ek8_reg { + u16 type; + u16 reg; /* 16-bit offset */ + u32 val; /* 8/16/32-bit value */ +}; + +/* Possible struct smia_reglist types. */ +#define ET8EK8_REGLIST_STANDBY 0 +#define ET8EK8_REGLIST_POWERON 1 +#define ET8EK8_REGLIST_RESUME 2 +#define ET8EK8_REGLIST_STREAMON 3 +#define ET8EK8_REGLIST_STREAMOFF 4 +#define ET8EK8_REGLIST_DISABLED 5 + +#define ET8EK8_REGLIST_MODE 10 + +#define ET8EK8_REGLIST_LSC_ENABLE 100 +#define ET8EK8_REGLIST_LSC_DISABLE 101 +#define ET8EK8_REGLIST_ANR_ENABLE 102 +#define ET8EK8_REGLIST_ANR_DISABLE 103 + +struct et8ek8_reglist { + u32 type; + struct et8ek8_mode mode; + struct et8ek8_reg regs[]; +}; + +#define ET8EK8_MAX_LEN 32 +struct et8ek8_meta_reglist { + char version[ET8EK8_MAX_LEN]; + union { + struct et8ek8_reglist *ptr; + } reglist[]; +}; + +extern struct et8ek8_meta_reglist meta_reglist; + +#endif /* ET8EK8REGS */ -- 1.9.1