From: Garlic Tseng <garlic.tseng@mediatek.com>
To: <broonie@kernel.org>, <tiwai@suse.de>
Cc: <garlic.tseng@mediatek.com>, <srv_heupstream@mediatek.com>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <alsa-devel@alsa-project.org>,
<koro.chen@mediatek.com>, <PC.Liao@mediatek.com>,
<ir.lian@mediatek.com>
Subject: [alsa-devel] [PATCH v3 4/9] ASoC: mediatek: add documents for mt2701
Date: Mon, 13 Jun 2016 14:24:07 +0800 [thread overview]
Message-ID: <1465799052-9657-5-git-send-email-garlic.tseng@mediatek.com> (raw)
In-Reply-To: <1465799052-9657-1-git-send-email-garlic.tseng@mediatek.com>
add mt2701-afe-pcm.txt and mt2701-cs42448.txt for mt2701
Signed-off-by: Garlic Tseng <garlic.tseng@mediatek.com>
---
.../devicetree/bindings/sound/mt2701-afe-pcm.txt | 150 +++++++++++++++++++++
.../devicetree/bindings/sound/mt2701-cs42448.txt | 43 ++++++
2 files changed, 193 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
create mode 100644 Documentation/devicetree/bindings/sound/mt2701-cs42448.txt
diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
new file mode 100644
index 0000000..3e623a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
@@ -0,0 +1,150 @@
+Mediatek AFE PCM controller for mt2701
+
+Required properties:
+- compatible = "mediatek,mt2701-audio";
+- reg: register location and size
+- interrupts: Should contain AFE interrupt
+- clock-names: should have these clock names:
+ "infra_sys_audio_clk",
+ "top_audio_mux1_sel",
+ "top_audio_mux2_sel",
+ "top_audio_mux1_div",
+ "top_audio_mux2_div",
+ "top_audio_48k_timing",
+ "top_audio_44k_timing",
+ "top_audpll_mux_sel",
+ "top_apll_sel",
+ "top_aud1_pll_98M",
+ "top_aud2_pll_90M",
+ "top_hadds2_pll_98M",
+ "top_hadds2_pll_294M",
+ "top_audpll",
+ "top_audpll_d4",
+ "top_audpll_d8",
+ "top_audpll_d16",
+ "top_audpll_d24",
+ "top_audintbus_sel",
+ "clk_26m",
+ "top_syspll1_d4",
+ "top_aud_k1_src_sel",
+ "top_aud_k2_src_sel",
+ "top_aud_k3_src_sel",
+ "top_aud_k4_src_sel",
+ "top_aud_k5_src_sel",
+ "top_aud_k6_src_sel",
+ "top_aud_k1_src_div",
+ "top_aud_k2_src_div",
+ "top_aud_k3_src_div",
+ "top_aud_k4_src_div",
+ "top_aud_k5_src_div",
+ "top_aud_k6_src_div",
+ "top_aud_i2s1_mclk",
+ "top_aud_i2s2_mclk",
+ "top_aud_i2s3_mclk",
+ "top_aud_i2s4_mclk",
+ "top_aud_i2s5_mclk",
+ "top_aud_i2s6_mclk",
+ "top_asm_m_sel",
+ "top_asm_h_sel",
+ "top_univpll2_d4",
+ "top_univpll2_d2",
+ "top_syspll_d5";
+
+Example:
+
+ afe: mt2701-afe-pcm@11220000 {
+ compatible = "mediatek,mt2701-audio";
+ reg = <0 0x11220000 0 0x2000>,
+ <0 0x112A0000 0 0x20000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_AUDIO>,
+ <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+ <&topckgen CLK_TOP_AUD_MUX2_DIV>,
+ <&topckgen CLK_TOP_AUD_48K_TIMING>,
+ <&topckgen CLK_TOP_AUD_44K_TIMING>,
+ <&topckgen CLK_TOP_AUDPLL_MUX_SEL>,
+ <&topckgen CLK_TOP_APLL_SEL>,
+ <&topckgen CLK_TOP_AUD1PLL_98M>,
+ <&topckgen CLK_TOP_AUD2PLL_90M>,
+ <&topckgen CLK_TOP_HADDS2PLL_98M>,
+ <&topckgen CLK_TOP_HADDS2PLL_294M>,
+ <&topckgen CLK_TOP_AUDPLL>,
+ <&topckgen CLK_TOP_AUDPLL_D4>,
+ <&topckgen CLK_TOP_AUDPLL_D8>,
+ <&topckgen CLK_TOP_AUDPLL_D16>,
+ <&topckgen CLK_TOP_AUDPLL_D24>,
+ <&topckgen CLK_TOP_AUDINTBUS_SEL>,
+ <&clk26m>,
+ <&topckgen CLK_TOP_SYSPLL1_D4>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K5_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K6_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K5_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K6_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S5_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S6_MCLK>,
+ <&topckgen CLK_TOP_ASM_M_SEL>,
+ <&topckgen CLK_TOP_ASM_H_SEL>,
+ <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_UNIVPLL2_D2>,
+ <&topckgen CLK_TOP_SYSPLL_D5>;
+
+ clock-names = "infra_sys_audio_clk",
+ "top_audio_mux1_sel",
+ "top_audio_mux2_sel",
+ "top_audio_mux1_div",
+ "top_audio_mux2_div",
+ "top_audio_48k_timing",
+ "top_audio_44k_timing",
+ "top_audpll_mux_sel",
+ "top_apll_sel",
+ "top_aud1_pll_98M",
+ "top_aud2_pll_90M",
+ "top_hadds2_pll_98M",
+ "top_hadds2_pll_294M",
+ "top_audpll",
+ "top_audpll_d4",
+ "top_audpll_d8",
+ "top_audpll_d16",
+ "top_audpll_d24",
+ "top_audintbus_sel",
+ "clk_26m",
+ "top_syspll1_d4",
+ "top_aud_k1_src_sel",
+ "top_aud_k2_src_sel",
+ "top_aud_k3_src_sel",
+ "top_aud_k4_src_sel",
+ "top_aud_k5_src_sel",
+ "top_aud_k6_src_sel",
+ "top_aud_k1_src_div",
+ "top_aud_k2_src_div",
+ "top_aud_k3_src_div",
+ "top_aud_k4_src_div",
+ "top_aud_k5_src_div",
+ "top_aud_k6_src_div",
+ "top_aud_i2s1_mclk",
+ "top_aud_i2s2_mclk",
+ "top_aud_i2s3_mclk",
+ "top_aud_i2s4_mclk",
+ "top_aud_i2s5_mclk",
+ "top_aud_i2s6_mclk",
+ "top_asm_m_sel",
+ "top_asm_h_sel",
+ "top_univpll2_d4",
+ "top_univpll2_d2",
+ "top_syspll_d5";
+ };
diff --git a/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt b/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt
new file mode 100644
index 0000000..0557444
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt
@@ -0,0 +1,43 @@
+MT2701 with CS42448 CODEC
+
+Required properties:
+- compatible: "mediatek,mt2701-cs42448-machine"
+- mediatek,platform: the phandle of MT2701 ASoC platform
+- audio-routing: a list of the connections between audio
+- mediatek,audio-codec: the phandles of cs42448 codec
+- mediatek,audio-codec-bt-mrg the phandles of bt-sco dummy codec
+- pinctrl-names: Should contain only one value - "default"
+- pinctrl-0: Should specify pin control groups used for this controller.
+- i2s1-in-sel-gpio1, i2s1-in-sel-gpio2: Should specify two gpio pins to
+ control I2S1-in mux.
+
+Example:
+
+ sound:sound {
+ compatible = "mediatek,mt2701-cs42448-machine";
+ mediatek,platform = <&afe>;
+ /* CS42448 Machine name */
+ audio-routing =
+ "Line Out Jack", "AOUT1L",
+ "Line Out Jack", "AOUT1R",
+ "Line Out Jack", "AOUT2L",
+ "Line Out Jack", "AOUT2R",
+ "Line Out Jack", "AOUT3L",
+ "Line Out Jack", "AOUT3R",
+ "Line Out Jack", "AOUT4L",
+ "Line Out Jack", "AOUT4R",
+ "AIN1L", "AMIC",
+ "AIN1R", "AMIC",
+ "AIN2L", "Tuner In",
+ "AIN2R", "Tuner In",
+ "AIN3L", "Satellite Tuner In",
+ "AIN3R", "Satellite Tuner In",
+ "AIN3L", "AUX In",
+ "AIN3R", "AUX In";
+ mediatek,audio-codec = <&cs42448>;
+ mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&aud_pins_default>;
+ i2s1-in-sel-gpio1 = <&pio 53 0>;
+ i2s1-in-sel-gpio2 = <&pio 54 0>;
+ };
--
1.9.1
next prev parent reply other threads:[~2016-06-13 6:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-13 6:24 [alsa-devel] [PATCH v3 0/9] ASoC: Mediatek: Add support for MT2701 SOC Garlic Tseng
2016-06-13 6:24 ` [alsa-devel] [PATCH v3 1/9] ASoC: mediatek: Refine mt8173 driver and change config option Garlic Tseng
2016-06-13 6:24 ` [alsa-devel] [PATCH v3 2/9] ASoC: mediatek: implement mediatek common structure Garlic Tseng
2016-06-13 6:24 ` [alsa-devel] [PATCH v3 3/9] ASoC: mediatek: let mt8173 use " Garlic Tseng
2016-06-13 6:24 ` Garlic Tseng [this message]
2016-06-13 6:24 ` [alsa-devel] [PATCH v3 5/9] ASoC: mediatek: add structure define and clock control for 2701 Garlic Tseng
2016-06-29 19:16 ` Applied "ASoC: mediatek: add structure define and clock control for 2701" to the asoc tree Mark Brown
2016-06-13 6:24 ` [alsa-devel] [PATCH v3 6/9] ASoC: mediatek: add mt2701 platform driver implementation Garlic Tseng
2016-06-13 6:24 ` [alsa-devel] [PATCH v3 7/9] ASoC: bt-sco: extend rate and add a general compatible string Garlic Tseng
2016-06-13 6:24 ` [alsa-devel] [PATCH v3 8/9] ASoC: mediatek: add BT implementation Garlic Tseng
2016-06-13 6:24 ` [alsa-devel] [PATCH v3 9/9] ASoC: mediatek: Add mt2701-cs42448 driver and config option Garlic Tseng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465799052-9657-5-git-send-email-garlic.tseng@mediatek.com \
--to=garlic.tseng@mediatek.com \
--cc=PC.Liao@mediatek.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ir.lian@mediatek.com \
--cc=koro.chen@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=srv_heupstream@mediatek.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).