From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1423039AbcFMLqA (ORCPT ); Mon, 13 Jun 2016 07:46:00 -0400 Received: from down.free-electrons.com ([37.187.137.238]:56913 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1161227AbcFMLp7 (ORCPT ); Mon, 13 Jun 2016 07:45:59 -0400 From: Quentin Schulz To: kishon@ti.com, maxime.ripard@free-electrons.com, wens@csie.org Cc: Quentin Schulz , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, thomas.petazzoni@free-electrons.com Subject: [PATCH] phy: phy-sun4i-usb: Fix optional gpios failing probe Date: Mon, 13 Jun 2016 13:45:48 +0200 Message-Id: <1465818348-29499-1-git-send-email-quentin.schulz@free-electrons.com> X-Mailer: git-send-email 2.5.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The interrupt 0 is not a valid interrupt number. In the event where the retrieval of the vbus-det gpio would return null, the gpiod_to_irq callback would return 0, while the current code makes the assumption that it is a valid interrupt, and would go on calling request_irq. Obviously, this would fail, preventing the driver from probing properly, while the vbus and id gpios are optional. Signed-off-by: Quentin Schulz --- drivers/phy/phy-sun4i-usb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index bae54f7..45f01d6 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -645,11 +645,11 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) data->id_det_irq = gpiod_to_irq(data->id_det_gpio); data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio); - if ((data->id_det_gpio && data->id_det_irq < 0) || - (data->vbus_det_gpio && data->vbus_det_irq < 0)) + if ((data->id_det_gpio && data->id_det_irq <= 0) || + (data->vbus_det_gpio && data->vbus_det_irq <= 0)) data->phy0_poll = true; - if (data->id_det_irq >= 0) { + if (data->id_det_irq > 0) { ret = devm_request_irq(dev, data->id_det_irq, sun4i_usb_phy0_id_vbus_det_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, @@ -660,7 +660,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) } } - if (data->vbus_det_irq >= 0) { + if (data->vbus_det_irq > 0) { ret = devm_request_irq(dev, data->vbus_det_irq, sun4i_usb_phy0_id_vbus_det_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -- 2.5.0