From: Philipp Reisner <philipp.reisner@linbit.com>
To: Jens Axboe <axboe@fb.com>, linux-kernel@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Subject: [PATCH 03/30] drbd: Kill code duplication
Date: Mon, 13 Jun 2016 16:08:51 +0200 [thread overview]
Message-ID: <1465826958-19398-4-git-send-email-philipp.reisner@linbit.com> (raw)
In-Reply-To: <1465826958-19398-1-git-send-email-philipp.reisner@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
drivers/block/drbd/drbd_nl.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 0bac9c8..fad03e4 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1348,6 +1348,14 @@ static bool write_ordering_changed(struct disk_conf *a, struct disk_conf *b)
a->disk_drain != b->disk_drain;
}
+static void sanitize_disk_conf(struct disk_conf *disk_conf, struct drbd_backing_dev *nbc)
+{
+ if (disk_conf->al_extents < DRBD_AL_EXTENTS_MIN)
+ disk_conf->al_extents = DRBD_AL_EXTENTS_MIN;
+ if (disk_conf->al_extents > drbd_al_extents_max(nbc))
+ disk_conf->al_extents = drbd_al_extents_max(nbc);
+}
+
int drbd_adm_disk_opts(struct sk_buff *skb, struct genl_info *info)
{
struct drbd_config_context adm_ctx;
@@ -1395,10 +1403,7 @@ int drbd_adm_disk_opts(struct sk_buff *skb, struct genl_info *info)
if (!expect(new_disk_conf->resync_rate >= 1))
new_disk_conf->resync_rate = 1;
- if (new_disk_conf->al_extents < DRBD_AL_EXTENTS_MIN)
- new_disk_conf->al_extents = DRBD_AL_EXTENTS_MIN;
- if (new_disk_conf->al_extents > drbd_al_extents_max(device->ldev))
- new_disk_conf->al_extents = drbd_al_extents_max(device->ldev);
+ sanitize_disk_conf(new_disk_conf, device->ldev);
if (new_disk_conf->c_plan_ahead > DRBD_C_PLAN_AHEAD_MAX)
new_disk_conf->c_plan_ahead = DRBD_C_PLAN_AHEAD_MAX;
@@ -1693,10 +1698,7 @@ int drbd_adm_attach(struct sk_buff *skb, struct genl_info *info)
if (retcode != NO_ERROR)
goto fail;
- if (new_disk_conf->al_extents < DRBD_AL_EXTENTS_MIN)
- new_disk_conf->al_extents = DRBD_AL_EXTENTS_MIN;
- if (new_disk_conf->al_extents > drbd_al_extents_max(nbc))
- new_disk_conf->al_extents = drbd_al_extents_max(nbc);
+ sanitize_disk_conf(new_disk_conf, nbc);
if (drbd_get_max_capacity(nbc) < new_disk_conf->disk_size) {
drbd_err(device, "max capacity %llu smaller than disk size %llu\n",
--
2.7.4
next prev parent reply other threads:[~2016-06-13 14:22 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-13 14:08 [PATCH 00/30] DRBD updates Philipp Reisner
2016-06-13 14:08 ` [PATCH 01/30] drbd: bitmap bulk IO: do not always suspend IO Philipp Reisner
2016-06-13 14:08 ` [PATCH 02/30] drbd: change bitmap write-out when leaving resync states Philipp Reisner
2016-06-13 14:08 ` Philipp Reisner [this message]
2016-06-13 14:08 ` [PATCH 04/30] drbd: Implement handling of thinly provisioned storage on resync target nodes Philipp Reisner
2016-06-13 14:08 ` [PATCH 05/30] drbd: Introduce new disk config option rs-discard-granularity Philipp Reisner
2016-06-13 14:08 ` [PATCH 06/30] drbd: Create the protocol feature THIN_RESYNC Philipp Reisner
2016-06-13 14:08 ` [PATCH 07/30] drbd: adjust assert in w_bitmap_io to account for BM_LOCKED_CHANGE_ALLOWED Philipp Reisner
2016-06-13 14:08 ` [PATCH 08/30] drbd: fix regression: protocol A sometimes synchronous, C sometimes double-latency Philipp Reisner
2016-06-13 14:08 ` [PATCH 09/30] drbd: fix for truncated minor number in callback command line Philipp Reisner
2016-06-13 14:08 ` [PATCH 10/30] drbd: allow parallel flushes for multi-volume resources Philipp Reisner
2016-06-13 14:08 ` [PATCH 11/30] drbd: when receiving P_TRIM, zero-out partial unaligned chunks Philipp Reisner
2016-06-13 14:09 ` [PATCH 12/30] drbd: possibly disable discard support, if backend has discard_zeroes_data=0 Philipp Reisner
2016-06-13 14:09 ` [PATCH 13/30] drbd: zero-out partial unaligned discards on local backend Philipp Reisner
2016-06-13 14:09 ` [PATCH 14/30] drbd: allow larger max_discard_sectors Philipp Reisner
2016-06-13 14:09 ` [PATCH 15/30] drbd: finish resync on sync source only by notification from sync target Philipp Reisner
2016-06-13 14:09 ` [PATCH 16/30] drbd: introduce unfence-peer handler Philipp Reisner
2016-06-13 14:09 ` [PATCH 17/30] drbd: don't forget error completion when "unsuspending" IO Philipp Reisner
2016-06-13 14:09 ` [PATCH 18/30] drbd: if there is no good data accessible, writes should be IO errors Philipp Reisner
2016-06-13 14:09 ` [PATCH 19/30] drbd: only restart frozen disk io when D_UP_TO_DATE Philipp Reisner
2016-06-13 14:09 ` [PATCH 20/30] drbd: discard_zeroes_if_aligned allows "thin" resync for discard_zeroes_data=0 Philipp Reisner
2016-06-13 14:09 ` [PATCH 21/30] drbd: report sizes if rejecting too small peer disk Philipp Reisner
2016-06-13 14:09 ` [PATCH 22/30] drbd: introduce WRITE_SAME support Philipp Reisner
2016-06-13 14:09 ` [PATCH 23/30] drbd: sync_handshake: handle identical uuids with current (frozen) Primary Philipp Reisner
2016-06-13 14:09 ` [PATCH 24/30] drbd: disallow promotion during resync handshake, avoid deadlock and hard reset Philipp Reisner
2016-06-13 14:09 ` [PATCH 25/30] drbd: bump current uuid when resuming IO with diskless peer Philipp Reisner
2016-06-13 14:09 ` [PATCH 26/30] drbd: code cleanups without semantic changes Philipp Reisner
2016-06-13 14:09 ` [PATCH 27/30] drbd: get rid of empty statement in is_valid_state Philipp Reisner
2016-06-13 14:09 ` [PATCH 28/30] drbd: finally report ms, not jiffies, in log message Philipp Reisner
2016-06-13 14:09 ` [PATCH 29/30] drbd: al_write_transaction: skip re-scanning of bitmap page pointer array Philipp Reisner
2016-06-13 14:09 ` [PATCH 30/30] drbd: correctly handle failed crypto_alloc_hash Philipp Reisner
2016-06-13 15:11 ` [PATCH 00/30] DRBD updates Jens Axboe
2016-06-13 22:26 ` Philipp Reisner
2016-06-13 22:26 ` [PATCH 01/30] drbd: bitmap bulk IO: do not always suspend IO Philipp Reisner
2016-06-13 22:26 ` [PATCH 02/30] drbd: change bitmap write-out when leaving resync states Philipp Reisner
2016-06-13 22:26 ` [PATCH 03/30] drbd: Kill code duplication Philipp Reisner
2016-06-13 22:26 ` [PATCH 04/30] drbd: Implement handling of thinly provisioned storage on resync target nodes Philipp Reisner
2016-06-13 22:26 ` [PATCH 05/30] drbd: Introduce new disk config option rs-discard-granularity Philipp Reisner
2016-06-13 22:26 ` [PATCH 06/30] drbd: Create the protocol feature THIN_RESYNC Philipp Reisner
2016-06-13 22:26 ` [PATCH 07/30] drbd: adjust assert in w_bitmap_io to account for BM_LOCKED_CHANGE_ALLOWED Philipp Reisner
2016-06-13 22:26 ` [PATCH 08/30] drbd: fix regression: protocol A sometimes synchronous, C sometimes double-latency Philipp Reisner
2016-06-13 22:26 ` [PATCH 09/30] drbd: fix for truncated minor number in callback command line Philipp Reisner
2016-06-13 22:26 ` [PATCH 10/30] drbd: allow parallel flushes for multi-volume resources Philipp Reisner
2016-06-13 22:26 ` [PATCH 11/30] drbd: when receiving P_TRIM, zero-out partial unaligned chunks Philipp Reisner
2016-06-13 22:26 ` [PATCH 12/30] drbd: possibly disable discard support, if backend has discard_zeroes_data=0 Philipp Reisner
2016-06-13 22:26 ` [PATCH 13/30] drbd: zero-out partial unaligned discards on local backend Philipp Reisner
2016-06-13 22:26 ` [PATCH 14/30] drbd: allow larger max_discard_sectors Philipp Reisner
2016-06-13 22:26 ` [PATCH 15/30] drbd: finish resync on sync source only by notification from sync target Philipp Reisner
2016-06-13 22:26 ` [PATCH 16/30] drbd: introduce unfence-peer handler Philipp Reisner
2016-06-13 22:26 ` [PATCH 17/30] drbd: don't forget error completion when "unsuspending" IO Philipp Reisner
2016-06-13 22:26 ` [PATCH 18/30] drbd: if there is no good data accessible, writes should be IO errors Philipp Reisner
2016-06-13 22:26 ` [PATCH 19/30] drbd: only restart frozen disk io when D_UP_TO_DATE Philipp Reisner
2016-06-13 22:26 ` [PATCH 20/30] drbd: discard_zeroes_if_aligned allows "thin" resync for discard_zeroes_data=0 Philipp Reisner
2016-06-13 22:26 ` [PATCH 21/30] drbd: report sizes if rejecting too small peer disk Philipp Reisner
2016-06-13 22:26 ` [PATCH 22/30] drbd: introduce WRITE_SAME support Philipp Reisner
2016-06-13 22:26 ` [PATCH 23/30] drbd: sync_handshake: handle identical uuids with current (frozen) Primary Philipp Reisner
2016-06-13 22:26 ` [PATCH 24/30] drbd: disallow promotion during resync handshake, avoid deadlock and hard reset Philipp Reisner
2016-06-13 22:26 ` [PATCH 25/30] drbd: bump current uuid when resuming IO with diskless peer Philipp Reisner
2016-06-13 22:26 ` [PATCH 26/30] drbd: code cleanups without semantic changes Philipp Reisner
2016-06-13 22:26 ` [PATCH 27/30] drbd: get rid of empty statement in is_valid_state Philipp Reisner
2016-06-13 22:26 ` [PATCH 28/30] drbd: finally report ms, not jiffies, in log message Philipp Reisner
2016-06-13 22:26 ` [PATCH 29/30] drbd: al_write_transaction: skip re-scanning of bitmap page pointer array Philipp Reisner
2016-06-13 22:26 ` [PATCH 30/30] drbd: correctly handle failed crypto_alloc_hash Philipp Reisner
-- strict thread matches above, loose matches on Subject: below --
2016-04-25 12:07 [PATCH 00/30] DBRD updates Philipp Reisner
2016-04-25 12:07 ` [PATCH 03/30] drbd: Kill code duplication Philipp Reisner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465826958-19398-4-git-send-email-philipp.reisner@linbit.com \
--to=philipp.reisner@linbit.com \
--cc=axboe@fb.com \
--cc=drbd-dev@lists.linbit.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).