From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755250AbcFPV2i (ORCPT ); Thu, 16 Jun 2016 17:28:38 -0400 Received: from mail-wm0-f51.google.com ([74.125.82.51]:35870 "EHLO mail-wm0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932122AbcFPV2f (ORCPT ); Thu, 16 Jun 2016 17:28:35 -0400 From: Daniel Lezcano To: daniel.lezcano@linaro.org, tglx@linutronix.de Cc: linux-kernel@vger.kernel.org Subject: [PATCH V2 24/63] clocksource/drivers/mps2-timer: Convert init function to return error Date: Thu, 16 Jun 2016 23:26:43 +0200 Message-Id: <1466112442-31105-25-git-send-email-daniel.lezcano@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org> References: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano --- drivers/clocksource/moxart_timer.c | 41 +++++++++++++++++++++++++------------- 1 file changed, 27 insertions(+), 14 deletions(-) diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c index 19857af..b9c30cd 100644 --- a/drivers/clocksource/moxart_timer.c +++ b/drivers/clocksource/moxart_timer.c @@ -119,34 +119,45 @@ static struct irqaction moxart_timer_irq = { .dev_id = &moxart_clockevent, }; -static void __init moxart_timer_init(struct device_node *node) +static int __init moxart_timer_init(struct device_node *node) { int ret, irq; unsigned long pclk; struct clk *clk; base = of_iomap(node, 0); - if (!base) - panic("%s: of_iomap failed\n", node->full_name); + if (!base) { + pr_err("%s: of_iomap failed\n", node->full_name); + return -ENXIO; + } irq = irq_of_parse_and_map(node, 0); - if (irq <= 0) - panic("%s: irq_of_parse_and_map failed\n", node->full_name); + if (irq <= 0) { + pr_err("%s: irq_of_parse_and_map failed\n", node->full_name); + return -EINVAL; + } ret = setup_irq(irq, &moxart_timer_irq); - if (ret) - panic("%s: setup_irq failed\n", node->full_name); + if (ret) { + pr_err("%s: setup_irq failed\n", node->full_name); + return ret; + } clk = of_clk_get(node, 0); - if (IS_ERR(clk)) - panic("%s: of_clk_get failed\n", node->full_name); + if (IS_ERR(clk)) { + pr_err("%s: of_clk_get failed\n", node->full_name); + return PTR_ERR(clk); + } pclk = clk_get_rate(clk); - if (clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT, - "moxart_timer", pclk, 200, 32, - clocksource_mmio_readl_down)) - panic("%s: clocksource_mmio_init failed\n", node->full_name); + ret = clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT, + "moxart_timer", pclk, 200, 32, + clocksource_mmio_readl_down); + if (ret) { + pr_err("%s: clocksource_mmio_init failed\n", node->full_name); + return ret; + } clock_count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ); @@ -164,5 +175,7 @@ static void __init moxart_timer_init(struct device_node *node) */ clockevents_config_and_register(&moxart_clockevent, pclk, 0x4, 0xfffffffe); + + return 0; } -CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init); +CLOCKSOURCE_OF_DECLARE_RET(moxart, "moxa,moxart-timer", moxart_timer_init); -- 1.9.1