[PATCH V2 58/63] clocksource/drivers/nios2: Convert init function to return error

[Daniel Lezcano <daniel.lezcano@linaro.org>]

The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/nios2/kernel/time.c | 69 +++++++++++++++++++++++++++++++++---------------
 1 file changed, 48 insertions(+), 21 deletions(-)

diff --git a/arch/nios2/kernel/time.c b/arch/nios2/kernel/time.c
index e835dda..9fa7739 100644
--- a/arch/nios2/kernel/time.c
+++ b/arch/nios2/kernel/time.c
@@ -206,15 +206,21 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void __init nios2_timer_get_base_and_freq(struct device_node *np,
+static int __init nios2_timer_get_base_and_freq(struct device_node *np,
 				void __iomem **base, u32 *freq)
 {
 	*base = of_iomap(np, 0);
-	if (!*base)
-		panic("Unable to map reg for %s\n", np->name);
+	if (!*base) {
+		pr_crit("Unable to map reg for %s\n", np->name);
+		return -ENXIO;
+	}
+
+	if (of_property_read_u32(np, "clock-frequency", freq)) {
+		pr_crit("Unable to get %s clock frequency\n", np->name);
+		return -EINVAL;
+	}
 
-	if (of_property_read_u32(np, "clock-frequency", freq))
-		panic("Unable to get %s clock frequency\n", np->name);
+	return 0;
 }
 
 static struct nios2_clockevent_dev nios2_ce = {
@@ -231,17 +237,21 @@ static struct nios2_clockevent_dev nios2_ce = {
 	},
 };
 
-static __init void nios2_clockevent_init(struct device_node *timer)
+static __init int nios2_clockevent_init(struct device_node *timer)
 {
 	void __iomem *iobase;
 	u32 freq;
-	int irq;
+	int irq, ret;
 
-	nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+	ret = nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+	if (ret)
+		return ret;
 
 	irq = irq_of_parse_and_map(timer, 0);
-	if (!irq)
-		panic("Unable to parse timer irq\n");
+	if (!irq) {
+		pr_crit("Unable to parse timer irq\n");
+		return -EINVAL;
+	}
 
 	nios2_ce.timer.base = iobase;
 	nios2_ce.timer.freq = freq;
@@ -253,25 +263,35 @@ static __init void nios2_clockevent_init(struct device_node *timer)
 	/* clear pending interrupt */
 	timer_writew(&nios2_ce.timer, 0, ALTERA_TIMER_STATUS_REG);
 
-	if (request_irq(irq, timer_interrupt, IRQF_TIMER, timer->name,
-		&nios2_ce.ced))
-		panic("Unable to setup timer irq\n");
+	ret = request_irq(irq, timer_interrupt, IRQF_TIMER, timer->name,
+			  &nios2_ce.ced);
+	if (ret) {
+		pr_crit("Unable to setup timer irq\n");
+		return ret;
+	}
 
 	clockevents_config_and_register(&nios2_ce.ced, freq, 1, ULONG_MAX);
+
+	return 0;
 }
 
-static __init void nios2_clocksource_init(struct device_node *timer)
+static __init int nios2_clocksource_init(struct device_node *timer)
 {
 	unsigned int ctrl;
 	void __iomem *iobase;
 	u32 freq;
+	int ret;
 
-	nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+	ret = nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+	if (ret)
+		return ret;
 
 	nios2_cs.timer.base = iobase;
 	nios2_cs.timer.freq = freq;
 
-	clocksource_register_hz(&nios2_cs.cs, freq);
+	ret = clocksource_register_hz(&nios2_cs.cs, freq);
+	if (ret)
+		return ret;
 
 	timer_writew(&nios2_cs.timer, USHRT_MAX, ALTERA_TIMER_PERIODL_REG);
 	timer_writew(&nios2_cs.timer, USHRT_MAX, ALTERA_TIMER_PERIODH_REG);
@@ -282,6 +302,8 @@ static __init void nios2_clocksource_init(struct device_node *timer)
 
 	/* Calibrate the delay loop directly */
 	lpj_fine = freq / HZ;
+
+	return 0;
 }
 
 /*
@@ -289,22 +311,25 @@ static __init void nios2_clocksource_init(struct device_node *timer)
  * more instances, the second one gets used as clocksource and all
  * others are unused.
 */
-static void __init nios2_time_init(struct device_node *timer)
+static int __init nios2_time_init(struct device_node *timer)
 {
 	static int num_called;
+	int ret;
 
 	switch (num_called) {
 	case 0:
-		nios2_clockevent_init(timer);
+		ret = nios2_clockevent_init(timer);
 		break;
 	case 1:
-		nios2_clocksource_init(timer);
+		ret = nios2_clocksource_init(timer);
 		break;
 	default:
 		break;
 	}
 
 	num_called++;
+
+	return ret;
 }
 
 void read_persistent_clock(struct timespec *ts)
@@ -321,10 +346,12 @@ void __init time_init(void)
 	for_each_compatible_node(np, NULL,  ALTR_TIMER_COMPATIBLE)
 		count++;
 
-	if (count < 2)
+	if (count < 2) {
 		panic("%d timer is found, it needs 2 timers in system\n", count);
 
 	clocksource_probe();
+
+	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);
+CLOCKSOURCE_OF_DECLARE_RET(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);
-- 
1.9.1