From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755135AbcFPV2M (ORCPT ); Thu, 16 Jun 2016 17:28:12 -0400 Received: from mail-wm0-f43.google.com ([74.125.82.43]:34935 "EHLO mail-wm0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755101AbcFPV2J (ORCPT ); Thu, 16 Jun 2016 17:28:09 -0400 From: Daniel Lezcano To: daniel.lezcano@linaro.org, tglx@linutronix.de Cc: linux-kernel@vger.kernel.org Subject: [PATCH V2 06/63] clocksource/drivers/asm9260: Convert init function to return error Date: Thu, 16 Jun 2016 23:26:25 +0200 Message-Id: <1466112442-31105-7-git-send-email-daniel.lezcano@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org> References: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano --- drivers/clocksource/asm9260_timer.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c index 217438d..d113c02 100644 --- a/drivers/clocksource/asm9260_timer.c +++ b/drivers/clocksource/asm9260_timer.c @@ -184,7 +184,7 @@ static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id) * Timer initialization * --------------------------------------------------------------------------- */ -static void __init asm9260_timer_init(struct device_node *np) +static int __init asm9260_timer_init(struct device_node *np) { int irq; struct clk *clk; @@ -192,20 +192,26 @@ static void __init asm9260_timer_init(struct device_node *np) unsigned long rate; priv.base = of_io_request_and_map(np, 0, np->name); - if (IS_ERR(priv.base)) - panic("%s: unable to map resource", np->name); + if (IS_ERR(priv.base)) { + pr_err("%s: unable to map resource", np->name); + return PTR_ERR(priv.base); + } clk = of_clk_get(np, 0); ret = clk_prepare_enable(clk); - if (ret) - panic("Failed to enable clk!\n"); + if (ret) { + pr_err("Failed to enable clk!\n"); + return ret; + } irq = irq_of_parse_and_map(np, 0); ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER, DRIVER_NAME, &event_dev); - if (ret) - panic("Failed to setup irq!\n"); + if (ret) { + pr_err("Failed to setup irq!\n"); + return ret; + } /* set all timers for count-up */ writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR); @@ -229,6 +235,8 @@ static void __init asm9260_timer_init(struct device_node *np) priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ); event_dev.cpumask = cpumask_of(0); clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe); + + return 0; } -CLOCKSOURCE_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer", +CLOCKSOURCE_OF_DECLARE_RET(asm9260_timer, "alphascale,asm9260-timer", asm9260_timer_init); -- 1.9.1