From: Andi Shyti <andi.shyti@samsung.com>
To: Mark Brown <broonie@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Andi Shyti <andi.shyti@samsung.com>,
Andi Shyti <andi@etezian.org>
Subject: [PATCH 2/5] spi: s3c64xx: group the CS signalling writes in a single function
Date: Fri, 17 Jun 2016 16:57:22 +0900 [thread overview]
Message-ID: <1466150245-2648-3-git-send-email-andi.shyti@samsung.com> (raw)
In-Reply-To: <1466150245-2648-1-git-send-email-andi.shyti@samsung.com>
To enable/disable the CS line, the driver performs a writel in
the S3C64XX_SPI_SLAVE_SEL registers. Put together all the writes
in that register in a single function.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
drivers/spi/spi-s3c64xx.c | 36 ++++++++++++++++++++++++++----------
1 file changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 5a76a50..972367d 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -310,6 +310,28 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
dma_async_issue_pending(dma->ch);
}
+static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable)
+{
+ struct s3c64xx_spi_driver_data *sdd =
+ spi_master_get_devdata(spi->master);
+
+ if (enable) {
+ if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) {
+ writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ } else {
+ u32 ssel = readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+
+ ssel |= (S3C64XX_SPI_SLAVE_AUTO |
+ S3C64XX_SPI_SLAVE_NSC_CNT_2);
+ writel(ssel, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ }
+ } else {
+ if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
+ writel(S3C64XX_SPI_SLAVE_SIG_INACT,
+ sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ }
+}
+
static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
{
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
@@ -706,12 +728,7 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
enable_datapath(sdd, spi, xfer, use_dma);
/* Start the signals */
- if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
- writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
- else
- writel(readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL)
- | S3C64XX_SPI_SLAVE_AUTO | S3C64XX_SPI_SLAVE_NSC_CNT_2,
- sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ s3c64xx_spi_set_cs(spi, true);
spin_unlock_irqrestore(&sdd->lock, flags);
@@ -861,16 +878,15 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
pm_runtime_mark_last_busy(&sdd->pdev->dev);
pm_runtime_put_autosuspend(&sdd->pdev->dev);
- if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
- writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ s3c64xx_spi_set_cs(spi, false);
+
return 0;
setup_exit:
pm_runtime_mark_last_busy(&sdd->pdev->dev);
pm_runtime_put_autosuspend(&sdd->pdev->dev);
/* setup() returns with device de-selected */
- if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
- writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+ s3c64xx_spi_set_cs(spi, false);
if (gpio_is_valid(spi->cs_gpio))
gpio_free(spi->cs_gpio);
--
2.8.1
next prev parent reply other threads:[~2016-06-17 7:57 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-17 7:57 [PATCH 0/5] SPI CS line logical change and s3c64xx code rework Andi Shyti
2016-06-17 7:57 ` [PATCH 1/5] spi: do not fail if the CS line is not connected Andi Shyti
2016-06-17 10:47 ` Mark Brown
2016-06-17 11:36 ` Andi Shyti
2016-06-17 12:28 ` Mark Brown
2016-06-19 6:09 ` Andi Shyti
2016-06-26 12:48 ` Mark Brown
2016-06-27 10:57 ` Andi Shyti
2016-06-27 13:06 ` Mark Brown
2016-06-27 14:08 ` Andi Shyti
2016-06-17 7:57 ` Andi Shyti [this message]
2016-06-30 12:15 ` Applied "spi: s3c64xx: group the CS signalling writes in a single function" to the spi tree Mark Brown
2016-06-17 7:57 ` [PATCH 3/5] spi: s3c64xx: consider the case where the CS line is not connected Andi Shyti
2016-06-17 7:57 ` [PATCH 4/5] spi: s3c64xx: do not configure the device twice Andi Shyti
2016-06-30 12:15 ` Applied "spi: s3c64xx: do not configure the device twice" to the spi tree Mark Brown
2016-06-17 7:57 ` [PATCH 5/5] spi: s3c63xx: simplify if statement in prepare_transfer function Andi Shyti
2016-06-30 12:15 ` Applied "spi: s3c64xx: simplify if statement in prepare_transfer function" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466150245-2648-3-git-send-email-andi.shyti@samsung.com \
--to=andi.shyti@samsung.com \
--cc=andi@etezian.org \
--cc=broonie@kernel.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).