From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755448AbcFQKJy (ORCPT ); Fri, 17 Jun 2016 06:09:54 -0400 Received: from mail-wm0-f50.google.com ([74.125.82.50]:33172 "EHLO mail-wm0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755290AbcFQKJw (ORCPT ); Fri, 17 Jun 2016 06:09:52 -0400 From: Daniel Lezcano To: daniel.lezcano@linaro.org, Vineet.Gupta1@synopsys.com, tglx@linutronix.de Cc: linux-kernel@vger.kernel.org, linux-snps-arc@lists.infradead.org Subject: [PATCH V3] clocksource/drivers/arc: Convert init function to return error Date: Fri, 17 Jun 2016 12:09:27 +0200 Message-Id: <1466158167-23126-1-git-send-email-daniel.lezcano@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <5763BC00.1030101@synopsys.com> References: <5763BC00.1030101@synopsys.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano --- arch/arc/kernel/time.c | 69 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 42 insertions(+), 27 deletions(-) diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index 4549ab2..b211f80 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -116,21 +116,21 @@ static struct clocksource arc_counter_gfrc = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init arc_cs_setup_gfrc(struct device_node *node) +static int __init arc_cs_setup_gfrc(struct device_node *node) { int exists = cpuinfo_arc700[0].extn.gfrc; int ret; if (WARN(!exists, "Global-64-bit-Ctr clocksource not detected")) - return; + return -ENXIO; ret = arc_get_timer_clk(node); if (ret) - return; + return ret; - clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq); + return clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq); } -CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc); +CLOCKSOURCE_OF_DECLARE_RET(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc); #endif @@ -172,27 +172,27 @@ static struct clocksource arc_counter_rtc = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init arc_cs_setup_rtc(struct device_node *node) +static int __init arc_cs_setup_rtc(struct device_node *node) { int exists = cpuinfo_arc700[smp_processor_id()].extn.rtc; int ret; if (WARN(!exists, "Local-64-bit-Ctr clocksource not detected")) - return; + return -ENXIO; /* Local to CPU hence not usable in SMP */ if (WARN(IS_ENABLED(CONFIG_SMP), "Local-64-bit-Ctr not usable in SMP")) - return; + return -EINVAL; ret = arc_get_timer_clk(node); if (ret) - return; + return ret; write_aux_reg(AUX_RTC_CTRL, 1); - clocksource_register_hz(&arc_counter_rtc, arc_timer_freq); + return clocksource_register_hz(&arc_counter_rtc, arc_timer_freq); } -CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc); +CLOCKSOURCE_OF_DECLARE_RET(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc); #endif @@ -213,23 +213,23 @@ static struct clocksource arc_counter_timer1 = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init arc_cs_setup_timer1(struct device_node *node) +static int __init arc_cs_setup_timer1(struct device_node *node) { int ret; /* Local to CPU hence not usable in SMP */ if (IS_ENABLED(CONFIG_SMP)) - return; + return -EINVAL; ret = arc_get_timer_clk(node); if (ret) - return; + return ret; write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX); write_aux_reg(ARC_REG_TIMER1_CNT, 0); write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH); - clocksource_register_hz(&arc_counter_timer1, arc_timer_freq); + return clocksource_register_hz(&arc_counter_timer1, arc_timer_freq); } /********** Clock Event Device *********/ @@ -324,20 +324,28 @@ static struct notifier_block arc_timer_cpu_nb = { /* * clockevent setup for boot CPU */ -static void __init arc_clockevent_setup(struct device_node *node) +static int __init arc_clockevent_setup(struct device_node *node) { struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device); int ret; - register_cpu_notifier(&arc_timer_cpu_nb); + ret = register_cpu_notifier(&arc_timer_cpu_nb); + if (ret) { + pr_err("Failed to register cpu notifier"); + return ret; + } arc_timer_irq = irq_of_parse_and_map(node, 0); - if (arc_timer_irq <= 0) - panic("clockevent: missing irq"); + if (arc_timer_irq <= 0) { + pr_err("clockevent: missing irq"); + return -EINVAL; + } ret = arc_get_timer_clk(node); - if (ret) - panic("clockevent: missing clk"); + if (ret) { + pr_err("clockevent: missing clk"); + return ret; + } evt->irq = arc_timer_irq; evt->cpumask = cpumask_of(smp_processor_id()); @@ -347,24 +355,31 @@ static void __init arc_clockevent_setup(struct device_node *node) /* Needs apriori irq_set_percpu_devid() done in intc map function */ ret = request_percpu_irq(arc_timer_irq, timer_irq_handler, "Timer0 (per-cpu-tick)", evt); - if (ret) - panic("clockevent: unable to request irq\n"); + if (ret) { + pr_err("clockevent: unable to request irq\n"); + returnr ret; + } enable_percpu_irq(arc_timer_irq, 0); + + return 0; } -static void __init arc_of_timer_init(struct device_node *np) +static int __init arc_of_timer_init(struct device_node *np) { static int init_count = 0; + int ret; if (!init_count) { init_count = 1; - arc_clockevent_setup(np); + ret = arc_clockevent_setup(np); } else { - arc_cs_setup_timer1(np); + ret = arc_cs_setup_timer1(np); } + + return ret; } -CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init); +CLOCKSOURCE_OF_DECLARE_RET(arc_clkevt, "snps,arc-timer", arc_of_timer_init); /* * Called from start_kernel() - boot CPU only -- 1.9.1