linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mel Gorman <mgorman@techsingularity.net>
To: Andrew Morton <akpm@linux-foundation.org>, Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@surriel.com>, Vlastimil Babka <vbabka@suse.cz>,
	Johannes Weiner <hannes@cmpxchg.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 10/27] mm, vmscan: Remove duplicate logic clearing node congestion and dirty state
Date: Tue, 21 Jun 2016 15:15:49 +0100	[thread overview]
Message-ID: <1466518566-30034-11-git-send-email-mgorman@techsingularity.net> (raw)
In-Reply-To: <1466518566-30034-1-git-send-email-mgorman@techsingularity.net>

Reclaim may stall if there is too much dirty or congested data on a node.
This was previously based on zone flags and the logic for clearing the
flags is in two places. As congestion/dirty tracking is now tracked on
a per-node basis, we can remove some duplicate logic.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
---
 mm/vmscan.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 2dafaa06884b..8347406c75fa 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2996,7 +2996,17 @@ static bool zone_balanced(struct zone *zone, int order, int classzone_idx)
 {
 	unsigned long mark = high_wmark_pages(zone);
 
-	return zone_watermark_ok_safe(zone, order, mark, classzone_idx);
+	if (!zone_watermark_ok_safe(zone, order, mark, classzone_idx))
+		return false;
+
+	/*
+	 * If any eligible zone is balanced then the node is not considered
+	 * to be congested or dirty
+	 */
+	clear_bit(PGDAT_CONGESTED, &zone->zone_pgdat->flags);
+	clear_bit(PGDAT_DIRTY, &zone->zone_pgdat->flags);
+
+	return true;
 }
 
 /*
@@ -3142,13 +3152,6 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 			if (!zone_balanced(zone, order, 0)) {
 				classzone_idx = i;
 				break;
-			} else {
-				/*
-				 * If any eligible zone is balanced then the
-				 * node is not considered congested or dirty.
-				 */
-				clear_bit(PGDAT_CONGESTED, &zone->zone_pgdat->flags);
-				clear_bit(PGDAT_DIRTY, &zone->zone_pgdat->flags);
 			}
 		}
 
@@ -3207,11 +3210,8 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 			if (!populated_zone(zone))
 				continue;
 
-			if (zone_balanced(zone, sc.order, classzone_idx)) {
-				clear_bit(PGDAT_CONGESTED, &pgdat->flags);
-				clear_bit(PGDAT_DIRTY, &pgdat->flags);
+			if (zone_balanced(zone, sc.order, classzone_idx))
 				goto out;
-			}
 		}
 
 		/*
-- 
2.6.4

  parent reply	other threads:[~2016-06-21 14:18 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-21 14:15 [PATCH 00/27] Move LRU page reclaim from zones to nodes v7 Mel Gorman
2016-06-21 14:15 ` [PATCH 01/27] mm, vmstat: Add infrastructure for per-node vmstats Mel Gorman
2016-06-21 14:15 ` [PATCH 02/27] mm, vmscan: Move lru_lock to the node Mel Gorman
2016-06-21 14:15 ` [PATCH 03/27] mm, vmscan: Move LRU lists to node Mel Gorman
2016-06-22 12:50   ` Vlastimil Babka
2016-06-21 14:15 ` [PATCH 04/27] mm, vmscan: Begin reclaiming pages on a per-node basis Mel Gorman
2016-06-22 14:04   ` Vlastimil Babka
2016-06-22 16:00     ` Vlastimil Babka
2016-06-23 11:07       ` Mel Gorman
2016-06-23 11:13         ` Michal Hocko
2016-06-23 10:58     ` Mel Gorman
2016-06-21 14:15 ` [PATCH 05/27] mm, vmscan: Have kswapd only scan based on the highest requested zone Mel Gorman
2016-06-21 14:15 ` [PATCH 06/27] mm, vmscan: Make kswapd reclaim in terms of nodes Mel Gorman
2016-06-21 14:15 ` [PATCH 07/27] mm, vmscan: Remove balance gap Mel Gorman
2016-06-21 14:15 ` [PATCH 08/27] mm, vmscan: Simplify the logic deciding whether kswapd sleeps Mel Gorman
2016-06-22 15:30   ` Vlastimil Babka
2016-06-21 14:15 ` [PATCH 09/27] mm, vmscan: By default have direct reclaim only shrink once per node Mel Gorman
2016-06-21 14:15 ` Mel Gorman [this message]
2016-06-21 14:15 ` [PATCH 11/27] mm: vmscan: Do not reclaim from kswapd if there is any eligible zone Mel Gorman
2016-06-21 14:15 ` [PATCH 12/27] mm, vmscan: Make shrink_node decisions more node-centric Mel Gorman
2016-06-22 13:20   ` Michal Hocko
2016-06-22 15:42   ` Vlastimil Babka
2016-06-21 14:15 ` [PATCH 13/27] mm, memcg: Move memcg limit enforcement from zones to nodes Mel Gorman
2016-06-22 13:15   ` Michal Hocko
2016-06-21 14:15 ` [PATCH 14/27] mm, workingset: Make working set detection node-aware Mel Gorman
2016-06-21 14:15 ` [PATCH 15/27] mm, page_alloc: Consider dirtyable memory in terms of nodes Mel Gorman
2016-06-22 14:15   ` Michal Hocko
2016-06-22 14:27     ` Michal Hocko
2016-06-23 12:53       ` Mel Gorman
2016-06-23 13:13         ` Michal Hocko
2016-06-21 14:15 ` [PATCH 16/27] mm: Move page mapped accounting to the node Mel Gorman
2016-06-21 22:32   ` Andrew Morton
2016-06-23  8:35     ` Mel Gorman
2016-06-22 14:35   ` Michal Hocko
2016-06-21 14:15 ` [PATCH 17/27] mm: Rename NR_ANON_PAGES to NR_ANON_MAPPED Mel Gorman
2016-06-22 14:28   ` Michal Hocko
2016-06-21 14:15 ` [PATCH 18/27] mm: Move most file-based accounting to the node Mel Gorman
2016-06-22 14:38   ` Michal Hocko
2016-06-21 14:15 ` [PATCH 19/27] mm: Move vmscan writes and file write " Mel Gorman
2016-06-22 14:40   ` Michal Hocko
2016-06-23 13:57     ` Mel Gorman
2016-06-23 14:06       ` Vlastimil Babka
2016-06-23 16:03         ` Mel Gorman
2016-06-21 14:15 ` [PATCH 20/27] mm, vmscan: Update classzone_idx if buffer_heads_over_limit Mel Gorman
2016-06-22 14:49   ` Michal Hocko
2016-06-21 14:16 ` [PATCH 21/27] mm, vmscan: Only wakeup kswapd once per node for the requested classzone Mel Gorman
2016-06-22 16:08   ` Vlastimil Babka
2016-06-21 14:16 ` [PATCH 22/27] mm: Convert zone_reclaim to node_reclaim Mel Gorman
2016-06-21 14:16 ` [PATCH 23/27] mm, vmscan: Add classzone information to tracepoints Mel Gorman
2016-06-21 14:16 ` [PATCH 24/27] mm, page_alloc: Remove fair zone allocation policy Mel Gorman
2016-06-21 14:16 ` [PATCH 25/27] mm: page_alloc: Cache the last node whose dirty limit is reached Mel Gorman
2016-06-21 14:16 ` [PATCH 26/27] mm: vmstat: Replace __count_zone_vm_events with a zone id equivalent Mel Gorman
2016-06-21 14:16 ` [PATCH 27/27] mm: vmstat: Account per-zone stalls and pages skipped during reclaim Mel Gorman
2016-06-23 10:26 ` [PATCH 00/27] Move LRU page reclaim from zones to nodes v7 Mel Gorman
2016-06-23 11:27   ` Michal Hocko
2016-06-23 12:33     ` Mel Gorman
2016-06-23 12:44       ` Michal Hocko
2016-06-23 21:45   ` Andrew Morton
2016-06-24  6:35 ` Balbir Singh
2016-06-24  7:50   ` Mel Gorman
2016-06-27 12:48     ` Balbir Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466518566-30034-11-git-send-email-mgorman@techsingularity.net \
    --to=mgorman@techsingularity.net \
    --cc=akpm@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=riel@surriel.com \
    --cc=vbabka@suse.cz \
    --subject='Re: [PATCH 10/27] mm, vmscan: Remove duplicate logic clearing node congestion and dirty state' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).