From: Xing Zheng <zhengxing@rock-chips.com>
To: heiko@sntech.de
Cc: linux-rockchip@lists.infradead.org,
radek.dostal@streamunlimited.com,
Xing Zheng <zhengxing@rock-chips.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [RESEND PATCH v2 2/4] ARM: dts: rockchip: add i2s nodes for RK322x SoCs
Date: Wed, 22 Jun 2016 11:16:51 +0800 [thread overview]
Message-ID: <1466565413-31027-3-git-send-email-zhengxing@rock-chips.com> (raw)
In-Reply-To: <1466565413-31027-1-git-send-email-zhengxing@rock-chips.com>
This patch add the i2s dt nodes for rk322x SoCs.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---
Changes in v2: None
arch/arm/boot/dts/rk322x.dtsi | 55 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index a68fdcaf..d5626705 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -237,6 +237,47 @@
status = "disabled";
};
+ i2s1: i2s1@100b0000 {
+ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+ reg = <0x100b0000 0x4000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+ dmas = <&pdma 14>, <&pdma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
+ status = "disabled";
+ };
+
+ i2s0: i2s0@100c0000 {
+ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+ reg = <0x100c0000 0x4000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+ dmas = <&pdma 11>, <&pdma 12>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2s2: i2s2@100e0000 {
+ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+ reg = <0x100e0000 0x4000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+ dmas = <&pdma 0>, <&pdma 1>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
pwm0: pwm@110b0000 {
compatible = "rockchip,rk3288-pwm";
reg = <0x110b0000 0x10>;
@@ -507,6 +548,20 @@
};
};
+ i2s1 {
+ i2s1_bus: i2s1-bus {
+ rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>,
+ <0 9 RK_FUNC_1 &pcfg_pull_none>,
+ <0 11 RK_FUNC_1 &pcfg_pull_none>,
+ <0 12 RK_FUNC_1 &pcfg_pull_none>,
+ <0 13 RK_FUNC_1 &pcfg_pull_none>,
+ <0 14 RK_FUNC_1 &pcfg_pull_none>,
+ <1 2 RK_FUNC_1 &pcfg_pull_none>,
+ <1 4 RK_FUNC_1 &pcfg_pull_none>,
+ <1 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
--
1.7.9.5
next prev parent reply other threads:[~2016-06-22 3:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-22 3:16 [RESEND PATCH v2 0/4] Add support i2s/spdif/gmac features for RK322x SoCs Xing Zheng
2016-06-22 3:16 ` [RESEND PATCH v2 1/4] ARM: dts: rockchip: rename rk3228.dtsi to rk322x.dtsi Xing Zheng
2016-06-22 3:16 ` Xing Zheng [this message]
2016-06-22 3:16 ` [RESEND PATCH v2 3/4] ARM: dts: rockchip: add GMAC nodes for RK322x SoCs Xing Zheng
2016-06-22 3:16 ` [RESEND PATCH v2 4/4] ARM: dts: rockchip: add support rk3229 evb board Xing Zheng
2016-06-27 19:43 ` [RESEND PATCH v2 0/4] Add support i2s/spdif/gmac features for RK322x SoCs Heiko Stuebner
2016-06-28 9:53 ` Xing Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466565413-31027-3-git-send-email-zhengxing@rock-chips.com \
--to=zhengxing@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=radek.dostal@streamunlimited.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).