[PATCH 1/1] ipmi: remove trydefaults parameter and default init

[Tony Camuso <tcamuso@redhat.com>]

Parameter trydefaults=1 causes the ipmi_init to initialize ipmi through
the legacy port io space that was designated for ipmi. Architectures
that do not map legacy port io can panic when trydefaults=1.

Rather than implement build-time conditional exceptions for each
architecture that does not map legacy port io, we have removed legacy
port io from the driver.

Parameter 'trydefaults' has been removed. Attempts to use it hereafter
will evoke the "Unknown symbol in module, or unknown parameter" message.

The patch was built against a number of architectures and tested for
regressions and functionality on x86_64 and ARM64.

Signed-off-by: Tony Camuso <tcamuso@redhat.com>
---
 drivers/char/ipmi/ipmi_si_intf.c | 73 ----------------------------------------
 1 file changed, 73 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 7b1c412..a112c01 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1322,7 +1322,6 @@ static bool          si_tryplatform = true;
 #ifdef CONFIG_PCI
 static bool          si_trypci = true;
 #endif
-static bool          si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS);
 static char          *si_type[SI_MAX_PARMS];
 #define MAX_SI_TYPE_STR 30
 static char          si_type_str[MAX_SI_TYPE_STR];
@@ -1371,10 +1370,6 @@ module_param_named(trypci, si_trypci, bool, 0);
 MODULE_PARM_DESC(trypci, "Setting this to zero will disable the"
 		 " default scan of the interfaces identified via pci");
 #endif
-module_param_named(trydefaults, si_trydefaults, bool, 0);
-MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the"
-		 " default scan of the KCS and SMIC interface at the standard"
-		 " address");
 module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
 MODULE_PARM_DESC(type, "Defines the type of each interface, each"
 		 " interface separated by commas.  The types are 'kcs',"
@@ -3461,62 +3456,6 @@ static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
 		del_timer_sync(&smi_info->si_timer);
 }
 
-static const struct ipmi_default_vals
-{
-	const int type;
-	const int port;
-} ipmi_defaults[] =
-{
-	{ .type = SI_KCS, .port = 0xca2 },
-	{ .type = SI_SMIC, .port = 0xca9 },
-	{ .type = SI_BT, .port = 0xe4 },
-	{ .port = 0 }
-};
-
-static void default_find_bmc(void)
-{
-	struct smi_info *info;
-	int             i;
-
-	for (i = 0; ; i++) {
-		if (!ipmi_defaults[i].port)
-			break;
-#ifdef CONFIG_PPC
-		if (check_legacy_ioport(ipmi_defaults[i].port))
-			continue;
-#endif
-		info = smi_info_alloc();
-		if (!info)
-			return;
-
-		info->addr_source = SI_DEFAULT;
-
-		info->si_type = ipmi_defaults[i].type;
-		info->io_setup = port_setup;
-		info->io.addr_data = ipmi_defaults[i].port;
-		info->io.addr_type = IPMI_IO_ADDR_SPACE;
-
-		info->io.addr = NULL;
-		info->io.regspacing = DEFAULT_REGSPACING;
-		info->io.regsize = DEFAULT_REGSPACING;
-		info->io.regshift = 0;
-
-		if (add_smi(info) == 0) {
-			if ((try_smi_init(info)) == 0) {
-				/* Found one... */
-				printk(KERN_INFO PFX "Found default %s"
-				" state machine at %s address 0x%lx\n",
-				si_to_str[info->si_type],
-				addr_space_to_str[info->io.addr_type],
-				info->io.addr_data);
-			} else
-				cleanup_one_si(info);
-		} else {
-			kfree(info);
-		}
-	}
-}
-
 static int is_new_interface(struct smi_info *info)
 {
 	struct smi_info *e;
@@ -3844,8 +3783,6 @@ static int init_ipmi_si(void)
 #ifdef CONFIG_PARISC
 	register_parisc_driver(&ipmi_parisc_driver);
 	parisc_registered = true;
-	/* poking PC IO addresses will crash machine, don't do it */
-	si_trydefaults = 0;
 #endif
 
 	/* We prefer devices with interrupts, but in the case of a machine
@@ -3885,16 +3822,6 @@ static int init_ipmi_si(void)
 	if (type)
 		return 0;
 
-	if (si_trydefaults) {
-		mutex_lock(&smi_infos_lock);
-		if (list_empty(&smi_infos)) {
-			/* No BMC was found, try defaults. */
-			mutex_unlock(&smi_infos_lock);
-			default_find_bmc();
-		} else
-			mutex_unlock(&smi_infos_lock);
-	}
-
 	mutex_lock(&smi_infos_lock);
 	if (unload_when_empty && list_empty(&smi_infos)) {
 		mutex_unlock(&smi_infos_lock);
-- 
2.5.5