LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: tglx@linutronix.de, daniel.lezcano@linaro.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 65/93] clocksource/drivers/microblaze: Convert init function to return error
Date: Thu,  7 Jul 2016 10:01:38 +0200
Message-ID: <1467878526-1238-65-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1467878526-1238-1-git-send-email-daniel.lezcano@linaro.org>

The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/microblaze/kernel/timer.c | 51 +++++++++++++++++++++++++++++++-----------
 1 file changed, 38 insertions(+), 13 deletions(-)

diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 67e2ef4..7f35e7b 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -170,7 +170,7 @@ static struct irqaction timer_irqaction = {
 	.dev_id = &clockevent_xilinx_timer,
 };
 
-static __init void xilinx_clockevent_init(void)
+static __init int xilinx_clockevent_init(void)
 {
 	clockevent_xilinx_timer.mult =
 		div_sc(timer_clock_freq, NSEC_PER_SEC,
@@ -181,6 +181,8 @@ static __init void xilinx_clockevent_init(void)
 		clockevent_delta2ns(1, &clockevent_xilinx_timer);
 	clockevent_xilinx_timer.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_xilinx_timer);
+
+	return 0;
 }
 
 static u64 xilinx_clock_read(void)
@@ -229,8 +231,14 @@ static struct clocksource clocksource_microblaze = {
 
 static int __init xilinx_clocksource_init(void)
 {
-	if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
-		panic("failed to register clocksource");
+	int ret;
+
+	ret = clocksource_register_hz(&clocksource_microblaze,
+				      timer_clock_freq);
+	if (ret) {
+		pr_err("failed to register clocksource");
+		return ret;
+	}
 
 	/* stop timer1 */
 	write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT,
@@ -239,16 +247,16 @@ static int __init xilinx_clocksource_init(void)
 	write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1);
 
 	/* register timecounter - for ftrace support */
-	init_xilinx_timecounter();
-	return 0;
+	return init_xilinx_timecounter();
 }
 
-static void __init xilinx_timer_init(struct device_node *timer)
+static int __init xilinx_timer_init(struct device_node *timer)
 {
 	struct clk *clk;
 	static int initialized;
 	u32 irq;
 	u32 timer_num = 1;
+	int ret;
 
 	if (initialized)
 		return;
@@ -258,7 +266,7 @@ static void __init xilinx_timer_init(struct device_node *timer)
 	timer_baseaddr = of_iomap(timer, 0);
 	if (!timer_baseaddr) {
 		pr_err("ERROR: invalid timer base address\n");
-		BUG();
+		return -ENXIO;
 	}
 
 	write_fn = timer_write32;
@@ -271,11 +279,15 @@ static void __init xilinx_timer_init(struct device_node *timer)
 	}
 
 	irq = irq_of_parse_and_map(timer, 0);
+	if (irq <= 0) {
+		pr_err("Failed to parse and map irq");
+		return -EINVAL;
+	}
 
 	of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num);
 	if (timer_num) {
-		pr_emerg("Please enable two timers in HW\n");
-		BUG();
+		pr_err("Please enable two timers in HW\n");
+		return -EINVAL;
 	}
 
 	pr_info("%s: irq=%d\n", timer->full_name, irq);
@@ -297,15 +309,28 @@ static void __init xilinx_timer_init(struct device_node *timer)
 
 	freq_div_hz = timer_clock_freq / HZ;
 
-	setup_irq(irq, &timer_irqaction);
+	ret = setup_irq(irq, &timer_irqaction);
+	if (ret) {
+		pr_err("Failed to setup IRQ");
+		return ret;
+	}
+
 #ifdef CONFIG_HEART_BEAT
 	microblaze_setup_heartbeat();
 #endif
-	xilinx_clocksource_init();
-	xilinx_clockevent_init();
+
+	ret = xilinx_clocksource_init();
+	if (ret)
+		return ret;
+
+	ret = xilinx_clockevent_init();
+	if (ret)
+		return ret;
 
 	sched_clock_register(xilinx_clock_read, 32, timer_clock_freq);
+
+	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a",
+CLOCKSOURCE_OF_DECLARE_RET(xilinx_timer, "xlnx,xps-timer-1.00.a",
 		       xilinx_timer_init);
-- 
1.9.1

  parent reply index

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-07  7:59 [GIT PULL] clockevents for 4.8 Daniel Lezcano
2016-07-07  8:00 ` [PATCH 01/93] clocksource/drivers/armada-370-xp: Make syscore_ops static Daniel Lezcano
2016-07-07  8:00   ` [PATCH 02/93] clocksource/drivers/digicolor: Fix warning of non-static function Daniel Lezcano
2016-07-07  8:00   ` [PATCH 03/93] clocksource/drivers/samsung_pwm_timer: Fix endian accessors Daniel Lezcano
2016-07-07  8:00   ` [PATCH 04/93] clocksource/drivers/samsung_pwm: Fix typo in Kconfig Daniel Lezcano
2016-07-07  8:00   ` [PATCH 05/93] dt-bindings: Document rk3399 rk-timer bindings Daniel Lezcano
2016-07-07  8:00   ` [PATCH 06/93] clocksource/drivers/rockchip: Add the dynamic irq flag to the timer Daniel Lezcano
2016-07-07  8:00   ` [PATCH 07/93] clocksource/drivers/rockchip: Add support for the rk3399 SoC Daniel Lezcano
2016-07-07  8:00   ` [PATCH 08/93] arm64: dts: rockchip: Add rktimer device node for rk3399 Daniel Lezcano
2016-07-07  8:00   ` [PATCH 09/93] clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer Daniel Lezcano
2016-07-07  8:00   ` [PATCH 10/93] dt-bindings: clocksource: Add Oxford Semiconductor RPS Timer bindings Daniel Lezcano
2016-07-07  8:00   ` [PATCH 11/93] of: Add a new macro to declare_of for one parameter function returning a value Daniel Lezcano
2016-07-07  8:00   ` [PATCH 12/93] clocksource/drivers/clksrc-probe: Introduce init functions with return code Daniel Lezcano
2016-07-07  8:00   ` [PATCH 13/93] clocksource/drivers/rockchip_timer: Convert init function to return error Daniel Lezcano
2016-07-07  8:00   ` [PATCH 14/93] clocksource/drivers/mtk_timer: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 15/93] clocksource/drivers/exynos_mct: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 16/93] clocksource/drivers/asm9260: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 17/93] clocksource/drivers/cadence_ttc: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 18/93] clocksource/drivers/st_lpc: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 19/93] clocksource/drivers/dw_apb_timer: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 20/93] clocksource/drivers/clps711x: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 21/93] clocksource/drivers/digicolor: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 22/93] clocksource/drivers/armv7m_systick: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 23/93] clocksource/drivers/bcm2835_timer: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 24/93] clocksource/drivers/bcm_kona: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 25/93] clocksource/drivers/clksrc-dbx500: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 26/93] clocksource/drivers/fsl_ftm_timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 27/93] clocksource/drivers/arm_arch_timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 28/93] clocksource/drivers/arm_global_timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 29/93] clocksource/drivers/h8300_timer16: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 30/93] clocksource/drivers/h8300_timer8: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 31/93] clocksource/drivers/h8300_tpu: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 32/93] clocksource/drivers/meson6_timer.c: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 33/93] clocksource/drivers/mips-gic-timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 34/93] clocksource/drivers/moxart: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 35/93] clocksource/drivers/mps2-timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 36/93] clocksource/drivers/mxs: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 37/93] clocksource/drivers/nomadik-mtu: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 38/93] clocksource/drivers/pxa: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 39/93] clocksource/drivers/qcom: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 40/93] clocksource/drivers/samsung_pwm: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 41/93] clocksource/drivers/sun4i: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 42/93] clocksource/drivers/tango_xtal: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 43/93] clocksource/drivers/tegra20: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 44/93] clocksource/drivers/time-armada-370-xp: " Daniel Lezcano
2016-07-12 15:11     ` Anna-Maria Gleixner
2016-07-12 15:18       ` Thomas Gleixner
2016-07-12 15:33       ` Anna-Maria Gleixner
2016-07-12 15:40         ` [tip:timers/core] clocksource/drivers/time-armada-370-xp: Fix return value check tip-bot for Anna-Maria Gleixner
2016-07-07  8:01   ` [PATCH 45/93] clocksource/drivers/time-efm32: Convert init function to return error Daniel Lezcano
2016-07-07  8:01   ` [PATCH 46/93] clocksource/drivers/time-lpc32xx: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 47/93] clocksource/drivers/orion: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 48/93] clocksource/drivers/pistachio: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 49/93] clocksource/drivers/atlas7: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 50/93] clocksource/drivers/atmel-pit: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 51/93] clocksource/drivers/atmel-st: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 52/93] clocksource/drivers/prima2: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 53/93] clocksource/drivers/imx-gpt: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 54/93] clocksource/drivers/integrator-ap: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 55/93] clocksource/drivers/keystone: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 56/93] clocksource/drivers/sp804: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 57/93] clocksource/drivers/stm32: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 58/93] clocksource/drivers/sun5i: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 59/93] clocksource/drivers/ti-32k: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 60/93] clocksource/drivers/u300: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 61/93] clocksource/drivers/versatile: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 62/93] clocksource/drivers/vf_pit_timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 63/93] clocksource/drivers/vt8500: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 64/93] clocksource/drivers/zevio: " Daniel Lezcano
2016-07-07  8:01   ` Daniel Lezcano [this message]
2016-07-07  8:01   ` [PATCH 66/93] clocksource/drivers/ralink: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 67/93] clocksource/drivers/nios2: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 68/93] clocksource/drivers/smp_twd: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 69/93] clocksource/drivers/nps: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 70/93] clocksource/drivers/arc: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 71/93] clocksource/drivers/oxnas-rps: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 72/93] clocksources: Switch back to the clksrc table Daniel Lezcano
2016-07-07  8:01   ` [PATCH 73/93] clk: Add missing clk_get_sys() stub Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467878526-1238-65-git-send-email-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git