linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: tglx@linutronix.de, daniel.lezcano@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-snps-arc@lists.infradead.org
Subject: [PATCH 70/93] clocksource/drivers/arc: Convert init function to return error
Date: Thu,  7 Jul 2016 10:01:43 +0200	[thread overview]
Message-ID: <1467878526-1238-70-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1467878526-1238-1-git-send-email-daniel.lezcano@linaro.org>

The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/arc/kernel/time.c | 69 ++++++++++++++++++++++++++++++--------------------
 1 file changed, 42 insertions(+), 27 deletions(-)

diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index 4549ab2..09de669 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -116,21 +116,21 @@ static struct clocksource arc_counter_gfrc = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_gfrc(struct device_node *node)
+static int __init arc_cs_setup_gfrc(struct device_node *node)
 {
 	int exists = cpuinfo_arc700[0].extn.gfrc;
 	int ret;
 
 	if (WARN(!exists, "Global-64-bit-Ctr clocksource not detected"))
-		return;
+		return -ENXIO;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
-	clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
 }
-CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
+CLOCKSOURCE_OF_DECLARE_RET(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
 
 #endif
 
@@ -172,27 +172,27 @@ static struct clocksource arc_counter_rtc = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_rtc(struct device_node *node)
+static int __init arc_cs_setup_rtc(struct device_node *node)
 {
 	int exists = cpuinfo_arc700[smp_processor_id()].extn.rtc;
 	int ret;
 
 	if (WARN(!exists, "Local-64-bit-Ctr clocksource not detected"))
-		return;
+		return -ENXIO;
 
 	/* Local to CPU hence not usable in SMP */
 	if (WARN(IS_ENABLED(CONFIG_SMP), "Local-64-bit-Ctr not usable in SMP"))
-		return;
+		return -EINVAL;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
 	write_aux_reg(AUX_RTC_CTRL, 1);
 
-	clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
 }
-CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
+CLOCKSOURCE_OF_DECLARE_RET(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
 
 #endif
 
@@ -213,23 +213,23 @@ static struct clocksource arc_counter_timer1 = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_timer1(struct device_node *node)
+static int __init arc_cs_setup_timer1(struct device_node *node)
 {
 	int ret;
 
 	/* Local to CPU hence not usable in SMP */
 	if (IS_ENABLED(CONFIG_SMP))
-		return;
+		return -EINVAL;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
 	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
 	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
 	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
 
-	clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
 }
 
 /********** Clock Event Device *********/
@@ -324,20 +324,28 @@ static struct notifier_block arc_timer_cpu_nb = {
 /*
  * clockevent setup for boot CPU
  */
-static void __init arc_clockevent_setup(struct device_node *node)
+static int __init arc_clockevent_setup(struct device_node *node)
 {
 	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
 	int ret;
 
-	register_cpu_notifier(&arc_timer_cpu_nb);
+	ret = register_cpu_notifier(&arc_timer_cpu_nb);
+	if (ret) {
+		pr_err("Failed to register cpu notifier");
+		return ret;
+	}
 
 	arc_timer_irq = irq_of_parse_and_map(node, 0);
-	if (arc_timer_irq <= 0)
-		panic("clockevent: missing irq");
+	if (arc_timer_irq <= 0) {
+		pr_err("clockevent: missing irq");
+		return -EINVAL;
+	}
 
 	ret = arc_get_timer_clk(node);
-	if (ret)
-		panic("clockevent: missing clk");
+	if (ret) {
+		pr_err("clockevent: missing clk");
+		return ret;
+	}
 
 	evt->irq = arc_timer_irq;
 	evt->cpumask = cpumask_of(smp_processor_id());
@@ -347,24 +355,31 @@ static void __init arc_clockevent_setup(struct device_node *node)
 	/* Needs apriori irq_set_percpu_devid() done in intc map function */
 	ret = request_percpu_irq(arc_timer_irq, timer_irq_handler,
 				 "Timer0 (per-cpu-tick)", evt);
-	if (ret)
-		panic("clockevent: unable to request irq\n");
+	if (ret) {
+		pr_err("clockevent: unable to request irq\n");
+		return ret;
+	}
 
 	enable_percpu_irq(arc_timer_irq, 0);
+
+	return 0;
 }
 
-static void __init arc_of_timer_init(struct device_node *np)
+static int __init arc_of_timer_init(struct device_node *np)
 {
 	static int init_count = 0;
+	int ret;
 
 	if (!init_count) {
 		init_count = 1;
-		arc_clockevent_setup(np);
+		ret = arc_clockevent_setup(np);
 	} else {
-		arc_cs_setup_timer1(np);
+		ret = arc_cs_setup_timer1(np);
 	}
+
+	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
 
 /*
  * Called from start_kernel() - boot CPU only
-- 
1.9.1

  parent reply	other threads:[~2016-07-07  8:19 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-07  7:59 [GIT PULL] clockevents for 4.8 Daniel Lezcano
2016-07-07  8:00 ` [PATCH 01/93] clocksource/drivers/armada-370-xp: Make syscore_ops static Daniel Lezcano
2016-07-07  8:00   ` [PATCH 02/93] clocksource/drivers/digicolor: Fix warning of non-static function Daniel Lezcano
2016-07-07  8:00   ` [PATCH 03/93] clocksource/drivers/samsung_pwm_timer: Fix endian accessors Daniel Lezcano
2016-07-07  8:00   ` [PATCH 04/93] clocksource/drivers/samsung_pwm: Fix typo in Kconfig Daniel Lezcano
2016-07-07  8:00   ` [PATCH 05/93] dt-bindings: Document rk3399 rk-timer bindings Daniel Lezcano
2016-07-07  8:00   ` [PATCH 06/93] clocksource/drivers/rockchip: Add the dynamic irq flag to the timer Daniel Lezcano
2016-07-07  8:00   ` [PATCH 07/93] clocksource/drivers/rockchip: Add support for the rk3399 SoC Daniel Lezcano
2016-07-07  8:00   ` [PATCH 08/93] arm64: dts: rockchip: Add rktimer device node for rk3399 Daniel Lezcano
2016-07-07  8:00   ` [PATCH 09/93] clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer Daniel Lezcano
2016-07-07  8:00   ` [PATCH 10/93] dt-bindings: clocksource: Add Oxford Semiconductor RPS Timer bindings Daniel Lezcano
2016-07-07  8:00   ` [PATCH 11/93] of: Add a new macro to declare_of for one parameter function returning a value Daniel Lezcano
2016-07-07  8:00   ` [PATCH 12/93] clocksource/drivers/clksrc-probe: Introduce init functions with return code Daniel Lezcano
2016-07-07  8:00   ` [PATCH 13/93] clocksource/drivers/rockchip_timer: Convert init function to return error Daniel Lezcano
2016-07-07  8:00   ` [PATCH 14/93] clocksource/drivers/mtk_timer: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 15/93] clocksource/drivers/exynos_mct: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 16/93] clocksource/drivers/asm9260: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 17/93] clocksource/drivers/cadence_ttc: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 18/93] clocksource/drivers/st_lpc: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 19/93] clocksource/drivers/dw_apb_timer: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 20/93] clocksource/drivers/clps711x: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 21/93] clocksource/drivers/digicolor: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 22/93] clocksource/drivers/armv7m_systick: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 23/93] clocksource/drivers/bcm2835_timer: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 24/93] clocksource/drivers/bcm_kona: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 25/93] clocksource/drivers/clksrc-dbx500: " Daniel Lezcano
2016-07-07  8:00   ` [PATCH 26/93] clocksource/drivers/fsl_ftm_timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 27/93] clocksource/drivers/arm_arch_timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 28/93] clocksource/drivers/arm_global_timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 29/93] clocksource/drivers/h8300_timer16: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 30/93] clocksource/drivers/h8300_timer8: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 31/93] clocksource/drivers/h8300_tpu: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 32/93] clocksource/drivers/meson6_timer.c: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 33/93] clocksource/drivers/mips-gic-timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 34/93] clocksource/drivers/moxart: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 35/93] clocksource/drivers/mps2-timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 36/93] clocksource/drivers/mxs: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 37/93] clocksource/drivers/nomadik-mtu: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 38/93] clocksource/drivers/pxa: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 39/93] clocksource/drivers/qcom: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 40/93] clocksource/drivers/samsung_pwm: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 41/93] clocksource/drivers/sun4i: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 42/93] clocksource/drivers/tango_xtal: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 43/93] clocksource/drivers/tegra20: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 44/93] clocksource/drivers/time-armada-370-xp: " Daniel Lezcano
2016-07-12 15:11     ` Anna-Maria Gleixner
2016-07-12 15:18       ` Thomas Gleixner
2016-07-12 15:33       ` Anna-Maria Gleixner
2016-07-12 15:40         ` [tip:timers/core] clocksource/drivers/time-armada-370-xp: Fix return value check tip-bot for Anna-Maria Gleixner
2016-07-07  8:01   ` [PATCH 45/93] clocksource/drivers/time-efm32: Convert init function to return error Daniel Lezcano
2016-07-07  8:01   ` [PATCH 46/93] clocksource/drivers/time-lpc32xx: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 47/93] clocksource/drivers/orion: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 48/93] clocksource/drivers/pistachio: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 49/93] clocksource/drivers/atlas7: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 50/93] clocksource/drivers/atmel-pit: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 51/93] clocksource/drivers/atmel-st: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 52/93] clocksource/drivers/prima2: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 53/93] clocksource/drivers/imx-gpt: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 54/93] clocksource/drivers/integrator-ap: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 55/93] clocksource/drivers/keystone: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 56/93] clocksource/drivers/sp804: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 57/93] clocksource/drivers/stm32: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 58/93] clocksource/drivers/sun5i: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 59/93] clocksource/drivers/ti-32k: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 60/93] clocksource/drivers/u300: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 61/93] clocksource/drivers/versatile: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 62/93] clocksource/drivers/vf_pit_timer: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 63/93] clocksource/drivers/vt8500: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 64/93] clocksource/drivers/zevio: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 65/93] clocksource/drivers/microblaze: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 66/93] clocksource/drivers/ralink: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 67/93] clocksource/drivers/nios2: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 68/93] clocksource/drivers/smp_twd: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 69/93] clocksource/drivers/nps: " Daniel Lezcano
2016-07-07  8:01   ` Daniel Lezcano [this message]
2016-07-07  8:01   ` [PATCH 71/93] clocksource/drivers/oxnas-rps: " Daniel Lezcano
2016-07-07  8:01   ` [PATCH 72/93] clocksources: Switch back to the clksrc table Daniel Lezcano
2016-07-07  8:01   ` [PATCH 73/93] clk: Add missing clk_get_sys() stub Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467878526-1238-70-git-send-email-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-snps-arc@lists.infradead.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).