From: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: "Leonidas S. Barbosa" <leosilva@linux.vnet.ibm.com>,
Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
Herbert Xu <herbert@gondor.apana.org.au>,
"David S. Miller" <davem@davemloft.net>,
linux-crypto@vger.kernel.org (open list:IBM Power VMX
Cryptographic instructions),
linuxppc-dev@lists.ozlabs.org (open list:LINUX FOR POWERPC
(32-BIT AND 64-BIT))
Subject: [PATCH 2/2] crypto: vmx - Adding support for XTS
Date: Mon, 11 Jul 2016 16:07:40 -0300 [thread overview]
Message-ID: <1468264060-22769-2-git-send-email-pfsmorigo@linux.vnet.ibm.com> (raw)
In-Reply-To: <1468264060-22769-1-git-send-email-pfsmorigo@linux.vnet.ibm.com>
From: "Leonidas S. Barbosa" <leosilva@linux.vnet.ibm.com>
This patch add XTS support using VMX-crypto driver.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
---
drivers/crypto/vmx/Makefile | 2 +-
drivers/crypto/vmx/aes_xts.c | 187 +++++++++++++++++++++++++++++++++++++++++++
drivers/crypto/vmx/vmx.c | 2 +
3 files changed, 190 insertions(+), 1 deletion(-)
create mode 100644 drivers/crypto/vmx/aes_xts.c
diff --git a/drivers/crypto/vmx/Makefile b/drivers/crypto/vmx/Makefile
index d28ab96..de6e241 100644
--- a/drivers/crypto/vmx/Makefile
+++ b/drivers/crypto/vmx/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o
-vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o ghash.o
+vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o aes_xts.o ghash.o
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
TARGET := linux-ppc64le
diff --git a/drivers/crypto/vmx/aes_xts.c b/drivers/crypto/vmx/aes_xts.c
new file mode 100644
index 0000000..62e698c
--- /dev/null
+++ b/drivers/crypto/vmx/aes_xts.c
@@ -0,0 +1,187 @@
+/**
+ * AES XTS routines supporting VMX In-core instructions on Power 8
+ *
+ * Copyright (C) 2015 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundations; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY of FITNESS FOR A PARTICUPAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
+ */
+
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/crypto.h>
+#include <linux/delay.h>
+#include <linux/hardirq.h>
+#include <asm/switch_to.h>
+#include <crypto/aes.h>
+#include <crypto/scatterwalk.h>
+
+#include "aesp8-ppc.h"
+
+struct p8_aes_xts_ctx {
+ struct crypto_blkcipher *fallback;
+ struct aes_key enc_key;
+ struct aes_key dec_key;
+ struct aes_key tweak_key;
+};
+
+static int p8_aes_xts_init(struct crypto_tfm *tfm)
+{
+ const char *alg;
+ struct crypto_blkcipher *fallback;
+ struct p8_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if (!(alg = crypto_tfm_alg_name(tfm))) {
+ printk(KERN_ERR "Failed to get algorithm name.\n");
+ return -ENOENT;
+ }
+
+ fallback =
+ crypto_alloc_blkcipher(alg, 0, CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(fallback)) {
+ printk(KERN_ERR
+ "Failed to allocate transformation for '%s': %ld\n",
+ alg, PTR_ERR(fallback));
+ return PTR_ERR(fallback);
+ }
+ printk(KERN_INFO "Using '%s' as fallback implementation.\n",
+ crypto_tfm_alg_driver_name((struct crypto_tfm *) fallback));
+
+ crypto_blkcipher_set_flags(
+ fallback,
+ crypto_blkcipher_get_flags((struct crypto_blkcipher *)tfm));
+ ctx->fallback = fallback;
+
+ return 0;
+}
+
+static void p8_aes_xts_exit(struct crypto_tfm *tfm)
+{
+ struct p8_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if (ctx->fallback) {
+ crypto_free_blkcipher(ctx->fallback);
+ ctx->fallback = NULL;
+ }
+}
+
+static int p8_aes_xts_setkey(struct crypto_tfm *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ int ret;
+ struct p8_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if (keylen % 2)
+ return -EINVAL;
+
+ preempt_disable();
+ pagefault_disable();
+ enable_kernel_vsx();
+ ret = aes_p8_set_encrypt_key(key + keylen/2, (keylen/2) * 8, &ctx->tweak_key);
+ ret += aes_p8_set_encrypt_key(key, (keylen/2) * 8, &ctx->enc_key);
+ ret += aes_p8_set_decrypt_key(key, (keylen/2) * 8, &ctx->dec_key);
+ disable_kernel_vsx();
+ pagefault_enable();
+ preempt_enable();
+
+ ret += crypto_blkcipher_setkey(ctx->fallback, key, keylen);
+ return ret;
+}
+
+static int p8_aes_xts_crypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes, int enc)
+{
+ int ret;
+ u8 tweak[AES_BLOCK_SIZE];
+ u8 *iv;
+ struct blkcipher_walk walk;
+ struct p8_aes_xts_ctx *ctx =
+ crypto_tfm_ctx(crypto_blkcipher_tfm(desc->tfm));
+ struct blkcipher_desc fallback_desc = {
+ .tfm = ctx->fallback,
+ .info = desc->info,
+ .flags = desc->flags
+ };
+
+ if (in_interrupt()) {
+ ret = enc ? crypto_blkcipher_encrypt(&fallback_desc, dst, src, nbytes) :
+ crypto_blkcipher_decrypt(&fallback_desc, dst, src, nbytes);
+ } else {
+ preempt_disable();
+ pagefault_disable();
+ enable_kernel_vsx();
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+
+ iv = (u8 *)walk.iv;
+ ret = blkcipher_walk_virt(desc, &walk);
+ aes_p8_encrypt(iv, tweak, &ctx->tweak_key);
+
+ while ((nbytes = walk.nbytes)) {
+ if (enc)
+ aes_p8_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
+ nbytes & AES_BLOCK_MASK, &ctx->enc_key, NULL, tweak);
+ else
+ aes_p8_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
+ nbytes & AES_BLOCK_MASK, &ctx->dec_key, NULL, tweak);
+
+ nbytes &= AES_BLOCK_SIZE - 1;
+ ret = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ disable_kernel_vsx();
+ pagefault_enable();
+ preempt_enable();
+ }
+ return ret;
+}
+
+static int p8_aes_xts_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ return p8_aes_xts_crypt(desc, dst, src, nbytes, 1);
+}
+
+static int p8_aes_xts_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ return p8_aes_xts_crypt(desc, dst, src, nbytes, 0);
+}
+
+struct crypto_alg p8_aes_xts_alg = {
+ .cra_name = "xts(aes)",
+ .cra_driver_name = "p8_aes_xts",
+ .cra_module = THIS_MODULE,
+ .cra_priority = 2000,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK,
+ .cra_alignmask = 0,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct p8_aes_xts_ctx),
+ .cra_init = p8_aes_xts_init,
+ .cra_exit = p8_aes_xts_exit,
+ .cra_blkcipher = {
+ .ivsize = AES_BLOCK_SIZE,
+ .min_keysize = 2 * AES_MIN_KEY_SIZE,
+ .max_keysize = 2 * AES_MAX_KEY_SIZE,
+ .setkey = p8_aes_xts_setkey,
+ .encrypt = p8_aes_xts_encrypt,
+ .decrypt = p8_aes_xts_decrypt,
+ }
+};
diff --git a/drivers/crypto/vmx/vmx.c b/drivers/crypto/vmx/vmx.c
index e163d57..f688c32 100644
--- a/drivers/crypto/vmx/vmx.c
+++ b/drivers/crypto/vmx/vmx.c
@@ -31,10 +31,12 @@ extern struct shash_alg p8_ghash_alg;
extern struct crypto_alg p8_aes_alg;
extern struct crypto_alg p8_aes_cbc_alg;
extern struct crypto_alg p8_aes_ctr_alg;
+extern struct crypto_alg p8_aes_xts_alg;
static struct crypto_alg *algs[] = {
&p8_aes_alg,
&p8_aes_cbc_alg,
&p8_aes_ctr_alg,
+ &p8_aes_xts_alg,
NULL,
};
--
2.5.5
next prev parent reply other threads:[~2016-07-11 19:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-11 19:07 [PATCH 1/2] crypto: vmx - Adding asm subroutines for XTS Paulo Flabiano Smorigo
2016-07-11 19:07 ` Paulo Flabiano Smorigo [this message]
2016-07-11 20:10 ` [PATCH 2/2] crypto: vmx - Adding support " Stephan Mueller
2016-07-11 23:37 ` [PATCH 1/2] crypto: vmx - Adding asm subroutines " Stephen Rothwell
2016-07-13 3:05 ` Stewart Smith
2016-07-13 13:34 ` Paulo Flabiano Smorigo
2016-07-13 15:11 ` Stephen Rothwell
2016-07-13 16:02 ` Paulo Flabiano Smorigo
2016-07-12 16:19 ` David Laight
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468264060-22769-2-git-send-email-pfsmorigo@linux.vnet.ibm.com \
--to=pfsmorigo@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=leosilva@linux.vnet.ibm.com \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).