From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Arnd Bergmann <arnd@arndb.de>, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 2/4] ARM: dts: at91: Fix ADC trigger nodes
Date: Wed, 13 Jul 2016 01:07:28 +0200 [thread overview]
Message-ID: <1468364850-32475-2-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1468364850-32475-1-git-send-email-alexandre.belloni@free-electrons.com>
The triggers don't need a reg property, remove it when prenset. Also remove
the unit-address from their name.
This solves:
Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /ahb/apb/adc@fc034000/trigger@3 has a unit name, but no reg property
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 12 ++++--------
arch/arm/boot/dts/at91sam9g45.dtsi | 12 ++++--------
arch/arm/boot/dts/at91sam9rl.dtsi | 12 ++++--------
arch/arm/boot/dts/at91sam9x5.dtsi | 12 ++++--------
arch/arm/boot/dts/sama5d3.dtsi | 12 ++++--------
arch/arm/boot/dts/sama5d4.dtsi | 8 ++++----
6 files changed, 24 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index af5ba315315f..49a02f5a4476 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -938,25 +938,21 @@
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
- trigger@0 {
- reg = <0>;
+ trigger0 {
trigger-name = "timer-counter-0";
trigger-value = <0x1>;
};
- trigger@1 {
- reg = <1>;
+ trigger1 {
trigger-name = "timer-counter-1";
trigger-value = <0x3>;
};
- trigger@2 {
- reg = <2>;
+ trigger2 {
trigger-name = "timer-counter-2";
trigger-value = <0x5>;
};
- trigger@3 {
- reg = <3>;
+ trigger3 {
trigger-name = "external";
trigger-value = <0xd>;
trigger-external;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 8837b7e4292c..048a9815a9e5 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1044,28 +1044,24 @@
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
- trigger@0 {
- reg = <0>;
+ trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
- trigger@1 {
- reg = <1>;
+ trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
- trigger@2 {
- reg = <2>;
+ trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
- trigger@3 {
- reg = <3>;
+ trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 6d829db4e887..201a3ca56874 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -265,25 +265,21 @@
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
- trigger@0 {
- reg = <0>;
+ trigger0 {
trigger-name = "timer-counter-0";
trigger-value = <0x1>;
};
- trigger@1 {
- reg = <1>;
+ trigger1 {
trigger-name = "timer-counter-1";
trigger-value = <0x3>;
};
- trigger@2 {
- reg = <2>;
+ trigger2 {
trigger-name = "timer-counter-2";
trigger-value = <0x5>;
};
- trigger@3 {
- reg = <3>;
+ trigger3 {
trigger-name = "external";
trigger-value = <0x13>;
trigger-external;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index cd0cd5fd09a3..075d5881770d 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1048,29 +1048,25 @@
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
- trigger@0 {
- reg = <0>;
+ trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
- trigger@1 {
- reg = <1>;
+ trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
- trigger@2 {
- reg = <2>;
+ trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
- trigger@3 {
- reg = <3>;
+ trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 36301bd9a14a..a7c5cf4d4ea5 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -326,26 +326,22 @@
atmel,adc-res-names = "lowres", "highres";
status = "disabled";
- trigger@0 {
- reg = <0>;
+ trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
- trigger@1 {
- reg = <1>;
+ trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
- trigger@2 {
- reg = <2>;
+ trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
- trigger@3 {
- reg = <3>;
+ trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 4e2cc30d6615..5a9f50fb8d65 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1226,22 +1226,22 @@
atmel,adc-ts-pressure-threshold = <10000>;
status = "disabled";
- trigger@0 {
+ trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
- trigger@1 {
+ trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
- trigger@2 {
+ trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
- trigger@3 {
+ trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
--
2.8.1
next prev parent reply other threads:[~2016-07-12 23:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-12 23:07 [PATCH 1/4] Documentation: dt: iio: at91_adc: fix trigger node names Alexandre Belloni
2016-07-12 23:07 ` Alexandre Belloni [this message]
2016-07-12 23:07 ` [PATCH 3/4] Documentation: dt: usb: atmel-usb: add unit-address Alexandre Belloni
2016-07-16 22:14 ` Rob Herring
2016-07-12 23:07 ` [PATCH 4/4] ARM: dts: at91: Fix USB endpoint nodes Alexandre Belloni
2016-07-16 22:13 ` [PATCH 1/4] Documentation: dt: iio: at91_adc: fix trigger node names Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468364850-32475-2-git-send-email-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).