From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Jiri Kosina <jikos@kernel.org>, Ping Cheng <pinglinux@gmail.com>,
Jason Gerecke <killertofu@gmail.com>,
Aaron Skomra <skomra@gmail.com>,
Peter Hutterer <peter.hutterer@who-t.net>
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [PATCH v2 27/30] HID: wacom: leds: handle Cintiq 24HD leds buttons
Date: Wed, 13 Jul 2016 18:06:14 +0200 [thread overview]
Message-ID: <1468425977-4819-28-git-send-email-benjamin.tissoires@redhat.com> (raw)
In-Reply-To: <1468425977-4819-1-git-send-email-benjamin.tissoires@redhat.com>
The 24HD has 1 button per LED (first three buttons of each group).
We need a special treatment for them as it's not a uniq button that
switches between the LEDs.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
Changes in v2:
- amended to use the old bank ordering
- removed the pr_err debug left over
---
drivers/hid/wacom_wac.c | 38 +++++++++++++++++++++++++++++++++++---
1 file changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index a9693d5..0914667 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2763,18 +2763,47 @@ static void wacom_setup_numbered_buttons(struct input_dev *input_dev,
__set_bit(BTN_BASE + (i-16), input_dev->keybit);
}
+static void wacom_24hd_update_leds(struct wacom *wacom, int mask, int group)
+{
+ struct wacom_led *led;
+ int i;
+ bool updated = false;
+
+ /*
+ * 24HD has LED group 1 to the left and LED group 0 to the right.
+ * So group 0 matches the second half of the buttons and thus the mask
+ * needs to be shifted.
+ */
+ if (group == 0)
+ mask >>= 8;
+
+ for (i = 0; i < 3; i++) {
+ led = wacom_led_find(wacom, group, i);
+ if (!led) {
+ hid_err(wacom->hdev, "can't find LED %d in group %d\n",
+ i, group);
+ continue;
+ }
+ if (!updated && mask & BIT(i)) {
+ led->held = true;
+ led_trigger_event(&led->trigger, LED_FULL);
+ } else {
+ led->held = false;
+ }
+ }
+}
+
static bool wacom_is_led_toggled(struct wacom *wacom, int button_count,
int mask, int group)
{
int button_per_group;
/*
- * 24HD and 21UX2 have LED group 1 to the left and LED group 0
+ * 21UX2 has LED group 1 to the left and LED group 0
* to the right. We need to reverse the group to match this
* historical behavior.
*/
- if (wacom->wacom_wac.features.type == WACOM_24HD ||
- wacom->wacom_wac.features.type == WACOM_21UX2)
+ if (wacom->wacom_wac.features.type == WACOM_21UX2)
group = 1 - group;
button_per_group = button_count/wacom->led.count;
@@ -2789,6 +2818,9 @@ static void wacom_update_led(struct wacom *wacom, int button_count, int mask,
int cur;
bool pressed;
+ if (wacom->wacom_wac.features.type == WACOM_24HD)
+ return wacom_24hd_update_leds(wacom, mask, group);
+
pressed = wacom_is_led_toggled(wacom, button_count, mask, group);
cur = wacom->led.groups[group].select;
--
2.5.5
next prev parent reply other threads:[~2016-07-13 16:13 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-13 16:05 [PATCH v2 00/30] HID: wacom: cleanup/EKR/LED Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 01/30] HID: wacom: actually report the battery level for wireless connected Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 02/30] HID: wacom: store the type in wacom->shared for INTUOSHT and INTUOSHT2 Benjamin Tissoires
2016-07-15 4:14 ` Ping Cheng
2016-07-18 14:54 ` Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 03/30] HID: wacom: remove cleanup of wacom->remote_dir from wacom_clean_inputs() Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 04/30] HID: wacom: untie leds from inputs Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 05/30] HID: wacom: use one work queue per task Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 06/30] HID: wacom: switch battery to devres Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 07/30] HID: wacom: switch inputs " Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 08/30] HID: wacom: put the managed resources in a group Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 09/30] HID: wacom: convert LEDs to devres Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 10/30] HID: wacom: use devm_kasprintf for allocating the name of the remote Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 11/30] HID: wacom: use devres to allocate driver data Benjamin Tissoires
2016-07-13 16:05 ` [PATCH v2 12/30] HID: wacom: devres manage the shared data too Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 13/30] HID: wacom: leds: dynamically allocate LED groups Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 14/30] HID: wacom: EKR: add a worker to add/remove resources on addition/removal Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 15/30] HID: wacom: EKR: have the wacom resources dynamically allocated Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 16/30] HID: wacom: rework fail path in probe() and parse_and_register() Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 17/30] HID: wacom: EKR: have proper allocator and destructor Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 18/30] HID: wacom: EKR: use devres groups to manage resources Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 19/30] HID: wacom: EKR: have one array of struct remotes instead of many arrays Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 20/30] HID: wacom: EKR: allocate one input node per remote Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 21/30] HID: wacom: EKR: have one power_supply " Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 22/30] HID: wacom: EKR: attach the power_supply on first connection Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 23/30] HID: wacom: leds: use the ledclass instead of custom made sysfs files Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 24/30] HID: wacom: leds: actually release the LEDs on disconnect Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 25/30] HID: wacom: leds: handle the switch of the LEDs directly in the kernel Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 26/30] HID: wacom: leds: make sure Cintiq 21UX2 and 24HD control the right LEDs Benjamin Tissoires
2016-07-13 16:06 ` Benjamin Tissoires [this message]
2016-07-13 16:06 ` [PATCH v2 28/30] HID: wacom: power_supply: mark the type as USB Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 29/30] HID: wacom: power_supply: remove ac information Benjamin Tissoires
2016-07-13 16:06 ` [PATCH v2 30/30] HID: wacom: power_supply: provide the actual model_name Benjamin Tissoires
2016-07-13 21:36 ` [PATCH v2 00/30] HID: wacom: cleanup/EKR/LED Aaron Armstrong Skomra
2016-08-01 23:17 ` Ping Cheng
2016-08-02 8:48 ` Jiri Kosina
2016-08-05 11:41 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468425977-4819-28-git-send-email-benjamin.tissoires@redhat.com \
--to=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=killertofu@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.hutterer@who-t.net \
--cc=pinglinux@gmail.com \
--cc=skomra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).