From: Ed Swierk <eswierk@skyportsystems.com>
To: tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
linux-security-module@vger.kernel.org
Cc: jarkko.sakkinen@linux.intel.com, jgunthorpe@obsidianresearch.com,
stefanb@us.ibm.com, eswierk@skyportsystems.com
Subject: [PATCH v9 4/5] tpm: Allow TPM chip drivers to override reported command durations
Date: Wed, 13 Jul 2016 09:19:35 -0700 [thread overview]
Message-ID: <1468426776-42762-5-git-send-email-eswierk@skyportsystems.com> (raw)
In-Reply-To: <1468426776-42762-1-git-send-email-eswierk@skyportsystems.com>
Some TPM chips report bogus command durations in their capabilities,
just as others report incorrect timeouts. Rework tpm_get_timeouts() to
allow chip drivers to override either via a single callback. Also
clean up handling of TPMs that report milliseconds instead of
microseconds.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
---
drivers/char/tpm/tpm-interface.c | 148 ++++++++++++++++++++++-----------------
drivers/char/tpm/tpm_tis_core.c | 32 +++------
include/linux/tpm.h | 3 +-
3 files changed, 94 insertions(+), 89 deletions(-)
diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index dc492ee..9dafc25 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -513,10 +513,10 @@ static int tpm_startup(struct tpm_chip *chip, __be16 startup_type)
int tpm_get_timeouts(struct tpm_chip *chip)
{
- cap_t cap;
- unsigned long new_timeout[4];
- unsigned long old_timeout[4];
- ssize_t rc;
+ cap_t cap1, cap2;
+ int rc;
+ unsigned long orig_timeout_a, orig_timeout_b, orig_timeout_c,
+ orig_timeout_d, orig_duration[3];
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
/* Fixed timeouts for TPM2 */
@@ -533,7 +533,7 @@ int tpm_get_timeouts(struct tpm_chip *chip)
return 0;
}
- rc = tpm_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap,
+ rc = tpm_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap1,
"attempting to determine the timeouts");
if (rc == TPM_ERR_INVALID_POSTINIT) {
/* The TPM is not started, we are the first to talk to it.
@@ -542,77 +542,95 @@ int tpm_get_timeouts(struct tpm_chip *chip)
if (tpm_startup(chip, TPM_ST_CLEAR))
return rc;
- rc = tpm_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap,
+ rc = tpm_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap1,
"attempting to determine the timeouts");
}
if (rc)
return rc;
- old_timeout[0] = be32_to_cpu(cap.timeout.a);
- old_timeout[1] = be32_to_cpu(cap.timeout.b);
- old_timeout[2] = be32_to_cpu(cap.timeout.c);
- old_timeout[3] = be32_to_cpu(cap.timeout.d);
- memcpy(new_timeout, old_timeout, sizeof(new_timeout));
-
- /*
- * Provide ability for vendor overrides of timeout values in case
- * of misreporting.
- */
- if (chip->ops->update_timeouts != NULL)
- chip->timeout_adjusted =
- chip->ops->update_timeouts(chip, new_timeout);
-
- if (!chip->timeout_adjusted) {
- /* Don't overwrite default if value is 0 */
- if (new_timeout[0] != 0 && new_timeout[0] < 1000) {
- int i;
-
- /* timeouts in msec rather usec */
- for (i = 0; i != ARRAY_SIZE(new_timeout); i++)
- new_timeout[i] *= 1000;
- chip->timeout_adjusted = true;
- }
- }
-
- /* Report adjusted timeouts */
- if (chip->timeout_adjusted) {
- dev_info(&chip->dev,
- HW_ERR "Adjusting reported timeouts: A %lu->%luus B %lu->%luus C %lu->%luus D %lu->%luus\n",
- old_timeout[0], new_timeout[0],
- old_timeout[1], new_timeout[1],
- old_timeout[2], new_timeout[2],
- old_timeout[3], new_timeout[3]);
- }
-
- chip->timeout_a = usecs_to_jiffies(new_timeout[0]);
- chip->timeout_b = usecs_to_jiffies(new_timeout[1]);
- chip->timeout_c = usecs_to_jiffies(new_timeout[2]);
- chip->timeout_d = usecs_to_jiffies(new_timeout[3]);
-
- rc = tpm_getcap(chip, TPM_CAP_PROP_TIS_DURATION, &cap,
+ rc = tpm_getcap(chip, TPM_CAP_PROP_TIS_DURATION, &cap2,
"attempting to determine the durations");
if (rc)
return rc;
- chip->duration[TPM_SHORT] =
- usecs_to_jiffies(be32_to_cpu(cap.duration.tpm_short));
- chip->duration[TPM_MEDIUM] =
- usecs_to_jiffies(be32_to_cpu(cap.duration.tpm_medium));
- chip->duration[TPM_LONG] =
- usecs_to_jiffies(be32_to_cpu(cap.duration.tpm_long));
+ be32_to_cpus(&cap1.timeout.a);
+ be32_to_cpus(&cap1.timeout.b);
+ be32_to_cpus(&cap1.timeout.c);
+ be32_to_cpus(&cap1.timeout.d);
+ chip->timeout_a = usecs_to_jiffies(cap1.timeout.a);
+ chip->timeout_b = usecs_to_jiffies(cap1.timeout.b);
+ chip->timeout_c = usecs_to_jiffies(cap1.timeout.c);
+ chip->timeout_d = usecs_to_jiffies(cap1.timeout.d);
- /* The Broadcom BCM0102 chipset in a Dell Latitude D820 gets the above
- * value wrong and apparently reports msecs rather than usecs. So we
- * fix up the resulting too-small TPM_SHORT value to make things work.
- * We also scale the TPM_MEDIUM and -_LONG values by 1000.
- */
- if (chip->duration[TPM_SHORT] < (HZ / 100)) {
- chip->duration[TPM_SHORT] = HZ;
- chip->duration[TPM_MEDIUM] *= 1000;
- chip->duration[TPM_LONG] *= 1000;
- chip->duration_adjusted = true;
- dev_info(&chip->dev, "Adjusting TPM timeout parameters.");
+ /* Some TPMs report timeouts in milliseconds rather than
+ microseconds. Use a value between 1 and 1000 as an
+ indication that this is the case. */
+ if (cap1.timeout.a > 0 && cap1.timeout.a < 1000) {
+ chip->timeout_a = msecs_to_jiffies(cap1.timeout.a);
+ chip->timeout_b = msecs_to_jiffies(cap1.timeout.b);
+ chip->timeout_c = msecs_to_jiffies(cap1.timeout.c);
+ chip->timeout_d = msecs_to_jiffies(cap1.timeout.d);
+ chip->timeout_adjusted = true;
}
+
+ be32_to_cpus(&cap2.duration.tpm_short);
+ be32_to_cpus(&cap2.duration.tpm_medium);
+ be32_to_cpus(&cap2.duration.tpm_long);
+ chip->duration[TPM_SHORT] =
+ usecs_to_jiffies(cap2.duration.tpm_short);
+ chip->duration[TPM_MEDIUM] =
+ usecs_to_jiffies(cap2.duration.tpm_medium);
+ chip->duration[TPM_LONG] =
+ usecs_to_jiffies(cap2.duration.tpm_long);
+
+ orig_timeout_a = chip->timeout_a;
+ orig_timeout_b = chip->timeout_b;
+ orig_timeout_c = chip->timeout_c;
+ orig_timeout_d = chip->timeout_d;
+ memcpy(orig_duration, chip->duration, 3 * sizeof(unsigned long));
+
+ /* Interpret duration values between 1 and 10000 as
+ milliseconds to deal with TPMs like the Broadcom BCM0102 in
+ the Dell Latitude D820. */
+ if (cap2.duration.tpm_short > 0 && cap2.duration.tpm_short < 10000) {
+ chip->duration[TPM_SHORT] =
+ msecs_to_jiffies(cap2.duration.tpm_short);
+ chip->duration[TPM_MEDIUM] =
+ msecs_to_jiffies(cap2.duration.tpm_medium);
+ chip->duration[TPM_LONG] =
+ msecs_to_jiffies(cap2.duration.tpm_long);
+ chip->duration_adjusted = true;
+ }
+
+ if (chip->ops->update_timeouts != NULL)
+ chip->ops->update_timeouts(chip);
+
+ if (chip->timeout_adjusted) {
+ dev_info(&chip->dev,
+ HW_ERR "Adjusted timeouts: A %u->%uus B %u->%uus"
+ " C %u->%uus D %u->%uus\n",
+ jiffies_to_usecs(orig_timeout_a),
+ jiffies_to_usecs(chip->timeout_a),
+ jiffies_to_usecs(orig_timeout_b),
+ jiffies_to_usecs(chip->timeout_b),
+ jiffies_to_usecs(orig_timeout_c),
+ jiffies_to_usecs(chip->timeout_c),
+ jiffies_to_usecs(orig_timeout_d),
+ jiffies_to_usecs(chip->timeout_d));
+ }
+
+ if (chip->duration_adjusted) {
+ dev_info(&chip->dev,
+ HW_ERR "Adjusted durations: short %u->%uus"
+ " medium %u->%uus long %u->%uus\n",
+ jiffies_to_usecs(orig_duration[TPM_SHORT]),
+ jiffies_to_usecs(chip->duration[TPM_SHORT]),
+ jiffies_to_usecs(orig_duration[TPM_MEDIUM]),
+ jiffies_to_usecs(chip->duration[TPM_MEDIUM]),
+ jiffies_to_usecs(orig_duration[TPM_LONG]),
+ jiffies_to_usecs(chip->duration[TPM_LONG]));
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(tpm_get_timeouts);
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index e62fdeb..f013664 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -398,37 +398,25 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
return rc;
}
-struct tis_vendor_timeout_override {
- u32 did_vid;
- unsigned long timeout_us[4];
-};
-
-static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = {
- /* Atmel 3204 */
- { 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000),
- (TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } },
-};
-
-static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
- unsigned long *timeout_cap)
+static void tpm_tis_update_timeouts(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int i, rc;
+ int rc;
u32 did_vid;
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &did_vid);
if (rc < 0)
return rc;
- for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
- if (vendor_timeout_overrides[i].did_vid != did_vid)
- continue;
- memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
- sizeof(vendor_timeout_overrides[i].timeout_us));
- return true;
+ switch (did_vid) {
+ case 0x32041114: /* Atmel 3204 */
+ chip->timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+ chip->timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->timeout_adjusted = true;
+ break;
}
-
- return false;
}
/*
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 706e63e..2380ebf 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -41,8 +41,7 @@ struct tpm_class_ops {
int (*send) (struct tpm_chip *chip, u8 *buf, size_t len);
void (*cancel) (struct tpm_chip *chip);
u8 (*status) (struct tpm_chip *chip);
- bool (*update_timeouts)(struct tpm_chip *chip,
- unsigned long *timeout_cap);
+ void (*update_timeouts)(struct tpm_chip *chip);
};
--
1.9.1
next prev parent reply other threads:[~2016-07-13 16:20 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 0:45 [PATCH v4 0/4] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-08 0:45 ` [PATCH v4 1/4] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-08 0:45 ` [PATCH v4 2/4] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-08 0:45 ` [PATCH v4 3/4] tpm: Allow TPM chip drivers to override reported " Ed Swierk
2016-06-08 19:05 ` [tpmdd-devel] " Jason Gunthorpe
2016-06-08 20:41 ` Ed Swierk
2016-06-08 0:45 ` [PATCH v4 4/4] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-08 23:00 ` [PATCH v5 0/4] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-08 23:00 ` [PATCH v5 1/4] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-08 23:00 ` [PATCH v5 2/4] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-08 23:00 ` [PATCH v5 3/4] tpm: Allow TPM chip drivers to override reported " Ed Swierk
2016-06-10 12:19 ` Jarkko Sakkinen
2016-06-10 17:34 ` Ed Swierk
2016-06-10 19:42 ` Jarkko Sakkinen
2016-06-11 1:54 ` Ed Swierk
2016-06-08 23:00 ` [PATCH v5 4/4] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-11 1:55 ` [PATCH v6 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-11 1:55 ` [PATCH v6 1/5] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-11 1:55 ` [PATCH v6 2/5] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-11 1:55 ` [PATCH v6 3/5] tpm: Factor out reading of timeout and duration capabilities Ed Swierk
2016-06-16 20:20 ` Jarkko Sakkinen
2016-06-19 12:12 ` Jarkko Sakkinen
2016-06-11 1:55 ` [PATCH v6 4/5] tpm: Allow TPM chip drivers to override reported command durations Ed Swierk
2016-06-16 20:26 ` Jarkko Sakkinen
2016-06-11 1:55 ` [PATCH v6 5/5] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-21 1:53 ` [PATCH v7 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-21 1:53 ` [PATCH v7 1/5] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-21 1:53 ` [PATCH v7 2/5] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-21 1:54 ` [PATCH v7 3/5] tpm: Clean up reading of timeout and duration capabilities Ed Swierk
2016-06-21 20:52 ` Jarkko Sakkinen
2016-06-22 0:21 ` Ed Swierk
2016-06-22 10:46 ` Jarkko Sakkinen
2016-06-21 1:54 ` [PATCH v7 4/5] tpm: Allow TPM chip drivers to override reported command durations Ed Swierk
2016-06-21 20:54 ` Jarkko Sakkinen
2016-06-21 1:54 ` [PATCH v7 5/5] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-06-21 20:55 ` Jarkko Sakkinen
2016-06-22 1:10 ` [PATCH v8 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-06-22 1:10 ` [PATCH v8 1/5] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-06-24 18:25 ` Jason Gunthorpe
2016-06-24 20:21 ` Jarkko Sakkinen
2016-06-24 20:23 ` Jarkko Sakkinen
2016-06-24 20:26 ` Jason Gunthorpe
2016-06-25 15:24 ` Jarkko Sakkinen
2016-06-25 15:47 ` Jarkko Sakkinen
2016-06-27 17:55 ` Jason Gunthorpe
2016-06-22 1:10 ` [PATCH v8 2/5] tpm: Add optional logging of TPM command durations Ed Swierk
2016-06-24 18:27 ` Jason Gunthorpe
2016-06-24 20:24 ` Jarkko Sakkinen
2016-06-22 1:10 ` [PATCH v8 3/5] tpm: Clean up reading of timeout and duration capabilities Ed Swierk
2016-06-22 1:10 ` [PATCH v8 4/5] tpm: Allow TPM chip drivers to override reported command durations Ed Swierk
2016-06-22 1:10 ` [PATCH v8 5/5] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-07-13 16:19 ` [PATCH v9 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-07-13 16:19 ` [PATCH v9 1/5] tpm_tis: Improve reporting of IO errors Ed Swierk
2016-07-13 16:19 ` [PATCH v9 2/5] tpm: Add optional logging of TPM command durations Ed Swierk
2016-07-13 16:19 ` [PATCH v9 3/5] tpm: Clean up reading of timeout and duration capabilities Ed Swierk
2016-07-18 18:15 ` Jarkko Sakkinen
2016-07-18 18:19 ` Jarkko Sakkinen
2016-07-18 18:20 ` Jarkko Sakkinen
2016-07-13 16:19 ` Ed Swierk [this message]
2016-07-13 17:04 ` [PATCH v9 4/5] tpm: Allow TPM chip drivers to override reported command durations kbuild test robot
2016-07-18 18:40 ` Jarkko Sakkinen
2016-07-13 16:19 ` [PATCH v9 5/5] tpm_tis: Increase ST19NP18 TPM command duration to avoid chip lockup Ed Swierk
2016-07-13 16:44 ` [PATCH v9 0/5] tpm: Command duration logging and chip-specific override Ed Swierk
2016-07-13 17:36 ` Jason Gunthorpe
2016-07-13 20:00 ` Ed Swierk
2016-07-13 20:58 ` Eric W. Biederman
2016-07-13 20:59 ` Jason Gunthorpe
2016-07-18 18:07 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468426776-42762-5-git-send-email-eswierk@skyportsystems.com \
--to=eswierk@skyportsystems.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=stefanb@us.ibm.com \
--cc=tpmdd-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).