linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
To: Hans Verkuil <hans.verkuil@cisco.com>,
	<daniel.thompson@linaro.org>, Rob Herring <robh+dt@kernel.org>,
	Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Pawel Osciak <posciak@chromium.org>
Cc: <srv_heupstream@mediatek.com>,
	Eddie Huang <eddie.huang@mediatek.com>,
	Yingjoe Chen <yingjoe.chen@mediatek.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-media@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>
Subject: [PATCH 0/4] Add MT8173 MDP Driver
Date: Thu, 14 Jul 2016 20:17:57 +0800	[thread overview]
Message-ID: <1468498681-19955-1-git-send-email-minghsiu.tsai@mediatek.com> (raw)

==============
 Introduction
==============

The purpose of this series is to add the driver for Media Data Path HW embedded in the Mediatek's MT8173 SoC.
MDP is used for scaling and color space conversion.

It could convert V4L2_PIX_FMT_MT21 to V4L2_PIX_FMT_NV12M or V4L2_PIX_FMT_YUV420M.

NV12M/YUV420M/MT21 -> MDP -> NV12M/YUV420M

This patch series rely on MTK VPU driver in patch series "Add MT8173 Video Encoder Driver and VPU Driver"[1] and "Add MT8173 Video Decoder Driver"[2].
MDP driver rely on VPU driver to load, communicate with VPU.

Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI both have been merged in v4.6-rc1.

[1]https://patchwork.kernel.org/patch/9002171/
[2]https://patchwork.kernel.org/patch/9141245/

==================
 Device interface
==================

In principle the driver bases on v4l2 memory-to-memory framework:
it provides a single video node and each opened file handle gets its own private context with separate buffer queues. Each context consist of 2 buffer queues: OUTPUT (for source buffers) and CAPTURE (for destination buffers).
OUTPUT and CAPTURE buffer could be MMAP or DMABUF memory type.

v4l2-compliance test output:
localhost ~ # v4l2-compliance -d /dev/image-proc0
v4l2-compliance SHA   : 3d225130559e8578dce347052bee3813ddf08f28

Driver Info:
        Driver name   : mtk-mdp
        Card type     : 14001000.rdma
        Bus info      : platform:mt8173
        Driver version: 3.18.0
        Capabilities  : 0x84204000
                Video Memory-to-Memory Multiplanar
                Streaming
                Extended Pix Format
                Device Capabilities
        Device Caps   : 0x04204000
                Video Memory-to-Memory Multiplanar
                Streaming
                Extended Pix Format

Compliance test for device /dev/image-proc0 (not using libv4l2):

Required ioctls:
        test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
        test second video open: OK
        test VIDIOC_QUERYCAP: OK
        test VIDIOC_G/S_PRIORITY: OK

Debug ioctls:
        test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
        test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
        test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
        test VIDIOC_ENUMAUDIO: OK (Not Supported)
        test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDIO: OK (Not Supported)
        Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
        test VIDIOC_G/S_MODULATOR: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_ENUMAUDOUT: OK (Not Supported)
        test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDOUT: OK (Not Supported)
        Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
        test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
        test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
        test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
        test VIDIOC_G/S_EDID: OK (Not Supported)

        Control ioctls:
                test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
                test VIDIOC_QUERYCTRL: OK
                test VIDIOC_G/S_CTRL: OK
                test VIDIOC_G/S/TRY_EXT_CTRLS: OK
                test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
                test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
                Standard Controls: 5 Private Controls: 0

        Format ioctls:
                test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
                test VIDIOC_G/S_PARM: OK (Not Supported)
                test VIDIOC_G_FBUF: OK (Not Supported)
                test VIDIOC_G_FMT: OK
                test VIDIOC_TRY_FMT: OK
                test VIDIOC_S_FMT: OK
                test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
                test Cropping: OK
                test Composing: OK
                test Scaling: OK (Not Supported)

        Codec ioctls:
                test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
                test VIDIOC_G_ENC_INDEX: OK (Not Supported)
                test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

        Buffer ioctls:
                test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
                test VIDIOC_EXPBUF: OK

Test input 0:


Total: 42, Succeeded: 42, Failed: 0, Warnings: 0


Minghsiu Tsai (4):
  VPU: mediatek: Add mdp support
  dt-bindings: Add a binding for Mediatek MDP
  media: Add Mediatek MDP Driver
  arm64: dts: mediatek: Add MDP for MT8173

 .../devicetree/bindings/media/mediatek-mdp.txt     |   92 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |   80 ++
 drivers/media/platform/Kconfig                     |   16 +
 drivers/media/platform/Makefile                    |    2 +
 drivers/media/platform/mtk-mdp/Makefile            |    9 +
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      |  159 +++
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |   72 ++
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  294 +++++
 drivers/media/platform/mtk-mdp/mtk_mdp_core.h      |  233 ++++
 drivers/media/platform/mtk-mdp/mtk_mdp_ipi.h       |  126 ++
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c       | 1304 ++++++++++++++++++++
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.h       |   22 +
 drivers/media/platform/mtk-mdp/mtk_mdp_regs.c      |  153 +++
 drivers/media/platform/mtk-mdp/mtk_mdp_regs.h      |   31 +
 drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c       |  140 +++
 drivers/media/platform/mtk-mdp/mtk_mdp_vpu.h       |   41 +
 drivers/media/platform/mtk-vpu/mtk_vpu.h           |    5 +
 17 files changed, 2779 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek-mdp.txt
 create mode 100644 drivers/media/platform/mtk-mdp/Makefile
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_core.c
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_core.h
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_ipi.h
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.h
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_regs.c
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_regs.h
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c
 create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_vpu.h

--
1.7.9.5

             reply	other threads:[~2016-07-14 12:18 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-14 12:17 Minghsiu Tsai [this message]
2016-07-14 12:17 ` [PATCH 1/4] VPU: mediatek: Add mdp support Minghsiu Tsai
2016-07-14 12:17 ` [PATCH 2/4] dt-bindings: Add a binding for Mediatek MDP Minghsiu Tsai
2016-07-16 23:01   ` Rob Herring
2016-07-20 12:14     ` Minghsiu Tsai
2016-07-14 12:18 ` [PATCH 3/4] media: Add Mediatek MDP Driver Minghsiu Tsai
2016-07-18 12:18   ` Hans Verkuil
2016-07-22  5:35     ` Minghsiu Tsai
2016-07-14 12:18 ` [PATCH 4/4] arm64: dts: mediatek: Add MDP for MT8173 Minghsiu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468498681-19955-1-git-send-email-minghsiu.tsai@mediatek.com \
    --to=minghsiu.tsai@mediatek.com \
    --cc=daniel.thompson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=djkurtz@chromium.org \
    --cc=eddie.huang@mediatek.com \
    --cc=hans.verkuil@cisco.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mchehab@osg.samsung.com \
    --cc=posciak@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    --cc=yingjoe.chen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).