From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Cc: Olof Johansson <olof@lixom.net>, Lee Jones <lee.jones@linaro.org>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Guenter Roeck <groeck@chromium.org>,
Gwendal Grignou <gwendal@chromium.org>
Subject: [PATCH v4 0/4] Add support for cros-ec-sensors
Date: Mon, 1 Aug 2016 11:54:34 +0200 [thread overview]
Message-ID: <1470045278-18161-1-git-send-email-enric.balletbo@collabora.com> (raw)
Hi,
This is the four patchset to add support for the sensors behind the ChromeOS
Embedded Controller.
This version has only the patches to support common functions and 3d
contiguous sensors like Accelerometers, Gyroscope and Magnetometer that are
presented by the ChromeOS EC Sensor hub. The patches were tested on an Oak board.
The code was checked out from the ChromeOS v3.18 tree and forward ported to
mainline solving all the conflicts and build issues. I splitted the code in
single patches that have sense by themselves in order to avoid the chances
to fail.
Note that the patches depends on this [1] to apply and work.
[1] https://lkml.org/lkml/2016/7/1/188
Waiting for your reviews and feedback.
Changes since v3 (requested by Guenter Roeck)
- Convert structure to a simple array
- Remove PM declarations
- Remove unnecessary initializations
- cros_ec_sensors_cmd_read_u16: Conversion should only be done if ret >= 0
- Remove unnecessary else
- Add Reviewed-by tag for two last patches.
Changes since v2 (requested by Guenter Roeck and Jonhatan Cameron)
- Rebased and fix build error.
- Include a list of possible values in the description of location attr.
- Fix some typos.
- Remove id sysfs entry.
- Skip filling by zero structure parameters that already zero'd.
- Order includes alphabetically.
- Propagate error codes.
Changes since v1 (requested by Peter Meerwald-Stadler and Jonhatan Cameron)
- Check kernel-doc documentation and
- Bring some patches together.
- Fix some spelling mistakes.
- Include ABI documentation.
- Be more careful with buffer sizes (sprintf -> snprintf)
- Add cros_ec_sensors prefix to all function.
- Check return values on some functions.
Best regards,
Enric Balletbo i Serra (3):
iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC
Sensor Hub.
iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
platform/chrome: cros_ec_dev - Register cros-ec sensors
Vincent Palatin (1):
platform/chrome: Introduce a new function to check EC features.
Documentation/ABI/testing/sysfs-bus-iio-cros-ec | 18 +
drivers/iio/common/Kconfig | 1 +
drivers/iio/common/Makefile | 1 +
drivers/iio/common/cros_ec_sensors/Kconfig | 22 +
drivers/iio/common/cros_ec_sensors/Makefile | 6 +
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 322 +++++++++++++++
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 450 +++++++++++++++++++++
.../common/cros_ec_sensors/cros_ec_sensors_core.h | 175 ++++++++
drivers/platform/chrome/cros_ec_dev.c | 159 ++++++++
include/linux/mfd/cros_ec.h | 10 +
include/linux/mfd/cros_ec_commands.h | 183 ++++++++-
11 files changed, 1342 insertions(+), 5 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-cros-ec
create mode 100644 drivers/iio/common/cros_ec_sensors/Kconfig
create mode 100644 drivers/iio/common/cros_ec_sensors/Makefile
create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
--
2.1.0
next reply other threads:[~2016-08-01 9:56 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-01 9:54 Enric Balletbo i Serra [this message]
2016-08-01 9:54 ` [PATCH v4 1/4] iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub Enric Balletbo i Serra
2016-08-01 16:57 ` Guenter Roeck
2016-08-15 15:28 ` Jonathan Cameron
2016-09-03 17:07 ` Jonathan Cameron
2016-10-25 17:12 ` Jonathan Cameron
2016-08-01 9:54 ` [PATCH v4 2/4] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver Enric Balletbo i Serra
2016-08-15 15:28 ` Jonathan Cameron
2016-09-03 17:12 ` Jonathan Cameron
2016-10-25 17:12 ` Jonathan Cameron
2016-08-01 9:54 ` [PATCH v4 3/4] platform/chrome: Introduce a new function to check EC features Enric Balletbo i Serra
2016-08-09 13:59 ` Lee Jones
2016-10-25 17:14 ` Jonathan Cameron
2016-08-01 9:54 ` [PATCH v4 4/4] platform/chrome: cros_ec_dev - Register cros-ec sensors Enric Balletbo i Serra
2016-08-15 15:31 ` Jonathan Cameron
2016-09-03 17:20 ` Jonathan Cameron
2016-10-25 17:27 ` Jonathan Cameron
2016-08-15 15:24 ` [PATCH v4 0/4] Add support for cros-ec-sensors Jonathan Cameron
2016-08-16 12:49 ` Lee Jones
2016-08-21 19:57 ` Jonathan Cameron
2016-08-29 15:14 ` Jonathan Cameron
2016-08-30 8:57 ` Lee Jones
2016-08-31 20:06 ` Jonathan Cameron
2016-09-01 7:24 ` Lee Jones
2016-09-03 17:21 ` Jonathan Cameron
2016-10-18 8:35 ` Enric Balletbo Serra
2016-10-18 8:56 ` Jonathan Cameron
2016-10-22 17:49 ` Olof Johansson
2016-10-22 18:47 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470045278-18161-1-git-send-email-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=groeck@chromium.org \
--cc=gwendal@chromium.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).