From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753081AbcHMDP1 (ORCPT ); Fri, 12 Aug 2016 23:15:27 -0400 Received: from mail.kernel.org ([198.145.29.136]:39844 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753022AbcHMDPX (ORCPT ); Fri, 12 Aug 2016 23:15:23 -0400 From: Sebastian Reichel To: Sebastian Reichel , Tony Lindgren , Rob Herring , Mark Rutland , Marcel Holtmann , Greg Kroah-Hartman , Jiri Slaby Cc: Ville Tervo , =?UTF-8?q?Filip=20Matijevi=C4=87?= , Aaro Koskinen , Pavel Machek , =?UTF-8?q?Pali=20Roh=C3=A1r?= , ivo.g.dimitrov.75@gmail.com, linux-bluetooth@vger.kernel.org, linux-serial@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [RFC 6/7] ARM: dts: OMAP3-N900: Add bluetooth Date: Sat, 13 Aug 2016 05:14:37 +0200 Message-Id: <1471058078-5579-7-git-send-email-sre@kernel.org> X-Mailer: git-send-email 2.8.1 In-Reply-To: <1471058078-5579-1-git-send-email-sre@kernel.org> References: <1471058078-5579-1-git-send-email-sre@kernel.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add bcm2048 node and its system clock to the N900 device tree file. Apart from that a reference to the new clock has been added to wl1251 (which uses it, too). Signed-off-by: Sebastian Reichel --- arch/arm/boot/dts/omap3-n900.dts | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 1d7b1d0d471a..1dba4a64d8fd 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -155,6 +155,13 @@ compatible = "nokia,n900-ir"; pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ }; + + /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ + vctcxo: vctcxo { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; }; &omap3_pmx_core { @@ -162,8 +169,10 @@ uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ >; }; @@ -917,6 +926,8 @@ interrupt-parent = <&gpio2>; interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ + + clocks = <&vctcxo>; }; }; @@ -937,6 +948,15 @@ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + + bcm2048: bluetooth { + compatible = "nokia,brcm,bcm2048"; + reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* 91 */ + host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ + bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ + clocks = <&vctcxo>; + clock-names = "sysclk"; + }; }; &uart3 { -- 2.8.1