From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: gregkh@linuxfoundation.org
Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 27/28] coresight: etm4x: adding configurable address range filtering
Date: Thu, 25 Aug 2016 15:19:17 -0600 [thread overview]
Message-ID: <1472159958-5981-28-git-send-email-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <1472159958-5981-1-git-send-email-mathieu.poirier@linaro.org>
This patch adds the capability to specify address ranges from
the perf cmd line using the --filter option. If the IP
falls within the range(s) program flow traces are generated.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 128 ++++++++++++++++++++++++--
1 file changed, 119 insertions(+), 9 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 1044ed609d81..ebaefb45130f 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -45,7 +45,9 @@ module_param_named(boot_enable, boot_enable, int, S_IRUGO);
/* The number of ETMv4 currently registered */
static int etm4_count;
static struct etmv4_drvdata *etmdrvdata[NR_CPUS];
-static void etm4_set_default(struct etmv4_config *config);
+static void etm4_set_default_config(struct etmv4_config *config);
+static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
+ struct perf_event *event);
static enum cpuhp_state hp_online;
@@ -187,11 +189,14 @@ static void etm4_enable_hw(void *info)
static int etm4_parse_event_config(struct etmv4_drvdata *drvdata,
struct perf_event *event)
{
+ int ret = 0;
struct etmv4_config *config = &drvdata->config;
struct perf_event_attr *attr = &event->attr;
- if (!attr)
- return -EINVAL;
+ if (!attr) {
+ ret = -EINVAL;
+ goto out;
+ }
/* Clear configuration from previous run */
memset(config, 0, sizeof(struct etmv4_config));
@@ -203,7 +208,12 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata,
config->mode = ETM_MODE_EXCL_USER;
/* Always start from the default config */
- etm4_set_default(config);
+ etm4_set_default_config(config);
+
+ /* Configure filters specified on the perf cmd line, if any. */
+ ret = etm4_set_event_filters(drvdata, event);
+ if (ret)
+ goto out;
/* Go from generic option to ETMv4 specifics */
if (attr->config & BIT(ETM_OPT_CYCACC))
@@ -211,23 +221,30 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata,
if (attr->config & BIT(ETM_OPT_TS))
config->cfg |= ETMv4_MODE_TIMESTAMP;
- return 0;
+out:
+ return ret;
}
static int etm4_enable_perf(struct coresight_device *csdev,
struct perf_event *event)
{
+ int ret = 0;
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
- if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id()))
- return -EINVAL;
+ if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) {
+ ret = -EINVAL;
+ goto out;
+ }
/* Configure the tracer based on the session's specifics */
- etm4_parse_event_config(drvdata, event);
+ ret = etm4_parse_event_config(drvdata, event);
+ if (ret)
+ goto out;
/* And enable it */
etm4_enable_hw(drvdata);
- return 0;
+out:
+ return ret;
}
static int etm4_enable_sysfs(struct coresight_device *csdev)
@@ -682,6 +699,99 @@ static void etm4_set_default(struct etmv4_config *config)
etm4_set_default_filter(config);
}
+static int etm4_get_next_comparator(struct etmv4_drvdata *drvdata, u32 type)
+{
+ int nr_comparator, index = 0;
+ struct etmv4_config *config = &drvdata->config;
+
+ /*
+ * nr_addr_cmp holds the number of comparator _pair_, so time 2
+ * for the total number of comparators.
+ */
+ nr_comparator = drvdata->nr_addr_cmp * 2;
+
+ /* Go through the tally of comparators looking for a free one. */
+ while (index < nr_comparator) {
+ switch (type) {
+ case ETM_ADDR_TYPE_RANGE:
+ if (config->addr_type[index] == ETM_ADDR_TYPE_NONE &&
+ config->addr_type[index + 1] == ETM_ADDR_TYPE_NONE)
+ return index;
+
+ /* Address range comparators go in pairs */
+ index += 2;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ /* If we are here all the comparators have been used. */
+ return -ENOSPC;
+}
+
+static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
+ struct perf_event *event)
+{
+ int i, comparator, ret = 0;
+ struct etmv4_config *config = &drvdata->config;
+ struct etm_filters *filters = event->hw.addr_filters;
+
+ if (!filters)
+ goto default_filter;
+
+ /* Sync events with what Perf got */
+ perf_event_addr_filters_sync(event);
+
+ /*
+ * If there are no filters to deal with simply go ahead with
+ * the default filter, i.e the entire address range.
+ */
+ if (!filters->nr_filters)
+ goto default_filter;
+
+ for (i = 0; i < filters->nr_filters; i++) {
+ struct etm_filter *filter = &filters->etm_filter[i];
+ enum etm_addr_type type = filter->type;
+
+ /* See if a comparator is free. */
+ comparator = etm4_get_next_comparator(drvdata, type);
+ if (comparator < 0) {
+ ret = comparator;
+ goto out;
+ }
+
+ switch (type) {
+ case ETM_ADDR_TYPE_RANGE:
+ etm4_set_comparator_filter(config,
+ filter->start_addr,
+ filter->stop_addr,
+ comparator);
+ /*
+ * TRCVICTLR::SSSTATUS == 1, the start-stop logic is
+ * in the started state
+ */
+ config->vinst_ctrl |= BIT(9);
+
+ /* No start-stop filtering for ViewInst */
+ config->vissctlr = 0x0;
+ break;
+ default:
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+
+ goto out;
+
+
+default_filter:
+ etm4_set_default_filter(config);
+
+out:
+ return ret;
+}
+
void etm4_config_trace_mode(struct etmv4_config *config)
{
u32 addr_acc, mode;
--
2.7.4
next prev parent reply other threads:[~2016-08-25 21:51 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-25 21:18 [PATCH 00/28] coresight: next v4.8-rc3 Mathieu Poirier
2016-08-25 21:18 ` [PATCH 01/28] coresight: access conn->child_name only if it's initialised Mathieu Poirier
2016-08-25 21:18 ` [PATCH 02/28] coresight-stm: support mmapping channel regions with mmio_addr Mathieu Poirier
2016-08-25 21:18 ` [PATCH 03/28] coresight: always use stashed trace id value in etm4_trace_id Mathieu Poirier
2016-08-25 21:18 ` [PATCH 04/28] coresight: Remove erroneous dma_free_coherent in tmc_probe Mathieu Poirier
2016-08-25 21:18 ` [PATCH 05/28] coresight: Consolidate error handling path for tmc_probe Mathieu Poirier
2016-08-25 21:18 ` [PATCH 06/28] coresight: Fix csdev connections initialisation Mathieu Poirier
2016-08-25 21:18 ` [PATCH 07/28] coresight: tmc: Limit the trace to available data Mathieu Poirier
2016-08-25 21:18 ` [PATCH 08/28] coresight: etmv4: Fix ETMv4x peripheral ID table Mathieu Poirier
2016-08-25 21:18 ` [PATCH 09/28] coresight: Cleanup TMC status check Mathieu Poirier
2016-08-25 21:19 ` [PATCH 10/28] coresight: Add better messages for coresight_timeout Mathieu Poirier
2016-08-25 21:19 ` [PATCH 11/28] coresight: delay initialisation when children are missing Mathieu Poirier
2016-08-25 21:19 ` [PATCH 12/28] coresight: add PM runtime calls to coresight_simple_func() Mathieu Poirier
2016-08-25 21:19 ` [PATCH 13/28] coresight-etm3x: Add ARM ETM 3.5 Cortex-A5 peripheral ID Mathieu Poirier
2016-08-25 21:19 ` [PATCH 14/28] hwtracing: coresight: of_coresight: add missing of_node_put after calling of_parse_phandle Mathieu Poirier
2016-08-25 21:19 ` [PATCH 15/28] coresight: Use local coresight_desc instances Mathieu Poirier
2016-08-25 21:19 ` [PATCH 16/28] coresight: etm4x: remove duplicated include from coresight-etm4x.c Mathieu Poirier
2016-08-25 21:19 ` [PATCH 17/28] coresight: tmc: Delete an unnecessary check before the function call "kfree" Mathieu Poirier
2016-08-25 21:19 ` [PATCH 18/28] coresight: etm4x: request to retain power to the trace unit when active Mathieu Poirier
2016-08-25 21:19 ` [PATCH 19/28] coresight: fix handling of ETM trace register access via sysfs Mathieu Poirier
2016-08-25 21:19 ` [PATCH 20/28] coresight: etm-perf: pass struct perf_event to source::enable/disable() Mathieu Poirier
2016-08-25 21:19 ` [PATCH 21/28] coresight: remove duplicated enumeration Mathieu Poirier
2016-08-25 21:19 ` [PATCH 22/28] coresight: etm-perf: configuring filters from perf core Mathieu Poirier
2016-08-25 21:19 ` [PATCH 23/28] coresight: etm4x: split default and filter configuration Mathieu Poirier
2016-08-25 21:19 ` [PATCH 24/28] coresight: etm4x: cleaning up default " Mathieu Poirier
2016-08-25 21:19 ` [PATCH 25/28] coresight: etm4x: adding range filter configuration function Mathieu Poirier
2016-08-25 21:19 ` [PATCH 26/28] coresight: etm4x: configuring include/exclude function Mathieu Poirier
2016-08-25 21:19 ` Mathieu Poirier [this message]
2016-08-25 21:19 ` [PATCH 28/28] coresight: etm4x: adding configurable start/stop filtering Mathieu Poirier
2016-08-31 11:08 ` [PATCH 00/28] coresight: next v4.8-rc3 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472159958-5981-28-git-send-email-mathieu.poirier@linaro.org \
--to=mathieu.poirier@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).