linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v8 1/4] mfd: RK808: Add RK818 support
@ 2016-08-29 11:07 Wadim Egorov
  2016-08-29 11:07 ` [PATCH v8 2/4] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Wadim Egorov @ 2016-08-29 11:07 UTC (permalink / raw)
  To: linux-kernel, rtc-linux, devicetree, linux-rockchip
  Cc: robh+dt, mark.rutland, lee.jones, lgirdwood, broonie, a.zummo,
	alexandre.belloni

The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld
devices. It contains the following components:

- Regulators
- RTC
- Clocking
- Battery support

Both RK808 and RK818 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: Andy Yan <andy.yan@rock-chips.com>
---
Changes since v7:
- add includes in alphabetical order
---
 drivers/mfd/Kconfig       |   4 +-
 drivers/mfd/rk808.c       | 226 +++++++++++++++++++++++++++++++++++++++-------
 include/linux/mfd/rk808.h | 154 +++++++++++++++++++++++++++++--
 3 files changed, 342 insertions(+), 42 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2d1fb64..a55be95 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -852,13 +852,13 @@ config MFD_RC5T583
 	  different functionality of the device.
 
 config MFD_RK808
-	tristate "Rockchip RK808 Power Management chip"
+	tristate "Rockchip RK808/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  If you say yes here you get support for the RK808
+	  If you say yes here you get support for the RK808 and RK818
 	  Power Management chips.
 	  This driver provides common support for accessing the device
 	  through I2C interface. The device supports multiple sub-devices
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 49d7f62..0f8acc5 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -1,11 +1,15 @@
 /*
- * MFD core driver for Rockchip RK808
+ * MFD core driver for Rockchip RK808/RK818
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
  *
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
@@ -21,6 +25,7 @@
 #include <linux/mfd/rk808.h>
 #include <linux/mfd/core.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/regmap.h>
 
 struct rk808_reg_data {
@@ -57,6 +62,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	return false;
 }
 
+static const struct regmap_config rk818_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK818_USB_CTRL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
 static const struct regmap_config rk808_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -79,11 +92,21 @@ static const struct mfd_cell rk808s[] = {
 	{
 		.name = "rk808-rtc",
 		.num_resources = ARRAY_SIZE(rtc_resources),
-		.resources = &rtc_resources[0],
+		.resources = rtc_resources,
 	},
 };
 
-static const struct rk808_reg_data pre_init_reg[] = {
+static const struct mfd_cell rk818s[] = {
+	{ .name = "rk808-clkout", },
+	{ .name = "rk808-regulator", },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = rtc_resources,
+	},
+};
+
+static const struct rk808_reg_data rk808_pre_init_reg[] = {
 	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
 	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
 	{ RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
@@ -94,6 +117,24 @@ static const struct rk808_reg_data pre_init_reg[] = {
 						    VB_LO_SEL_3500MV },
 };
 
+static const struct rk808_reg_data rk818_pre_init_reg[] = {
+	/* improve efficiency */
+	{ RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK,  BUCK_ILMIN_250MA },
+	{ RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_250MA },
+	{ RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+	{ RK818_USB_CTRL_REG,	  RK818_USB_ILIM_SEL_MASK,
+						    RK818_USB_ILMIN_2000MA },
+	/* close charger when usb lower then 3.4V */
+	{ RK818_USB_CTRL_REG,	  RK818_USB_CHG_SD_VSEL_MASK,
+						    (0x7 << 4) },
+	/* no action when vref */
+	{ RK818_H5V_EN_REG,	  BIT(1),	    RK818_REF_RDY_CTRL },
+	/* enable HDMI 5V */
+	{ RK818_H5V_EN_REG,	  BIT(0),	    RK818_H5V_EN },
+	{ RK808_VB_MON_REG,	  MASK_ALL,	    VB_LO_ACT |
+						    VB_LO_SEL_3500MV },
+};
+
 static const struct regmap_irq rk808_irqs[] = {
 	/* INT_STS */
 	[RK808_IRQ_VOUT_LO] = {
@@ -136,6 +177,76 @@ static const struct regmap_irq rk808_irqs[] = {
 	},
 };
 
+static const struct regmap_irq rk818_irqs[] = {
+	/* INT_STS */
+	[RK818_IRQ_VOUT_LO] = {
+		.mask = RK818_IRQ_VOUT_LO_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_VB_LO] = {
+		.mask = RK818_IRQ_VB_LO_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_PWRON] = {
+		.mask = RK818_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_PWRON_LP] = {
+		.mask = RK818_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_HOTDIE] = {
+		.mask = RK818_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_RTC_ALARM] = {
+		.mask = RK818_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_RTC_PERIOD] = {
+		.mask = RK818_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_USB_OV] = {
+		.mask = RK818_IRQ_USB_OV_MSK,
+		.reg_offset = 0,
+	},
+
+	/* INT_STS2 */
+	[RK818_IRQ_PLUG_IN] = {
+		.mask = RK818_IRQ_PLUG_IN_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_PLUG_OUT] = {
+		.mask = RK818_IRQ_PLUG_OUT_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_CHG_OK] = {
+		.mask = RK818_IRQ_CHG_OK_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_CHG_TE] = {
+		.mask = RK818_IRQ_CHG_TE_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_CHG_TS1] = {
+		.mask = RK818_IRQ_CHG_TS1_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_TS2] = {
+		.mask = RK818_IRQ_TS2_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_CHG_CVTLIM] = {
+		.mask = RK818_IRQ_CHG_CVTLIM_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_DISCHG_ILIM] = {
+		.mask = RK818_IRQ_DISCHG_ILIM_MSK,
+		.reg_offset = 1,
+	},
+};
+
 static struct regmap_irq_chip rk808_irq_chip = {
 	.name = "rk808",
 	.irqs = rk808_irqs,
@@ -148,6 +259,18 @@ static struct regmap_irq_chip rk808_irq_chip = {
 	.init_ack_masked = true,
 };
 
+static struct regmap_irq_chip rk818_irq_chip = {
+	.name = "rk818",
+	.irqs = rk818_irqs,
+	.num_irqs = ARRAY_SIZE(rk818_irqs),
+	.num_regs = 2,
+	.irq_reg_stride = 2,
+	.status_base = RK818_INT_STS_REG1,
+	.mask_base = RK818_INT_STS_MSK_REG1,
+	.ack_base = RK818_INT_STS_REG1,
+	.init_ack_masked = true,
+};
+
 static struct i2c_client *rk808_i2c_client;
 static void rk808_device_shutdown(void)
 {
@@ -167,55 +290,100 @@ static void rk808_device_shutdown(void)
 		dev_err(&rk808_i2c_client->dev, "power off error!\n");
 }
 
+static const struct of_device_id rk808_of_match[] = {
+	{ .compatible = "rockchip,rk808" },
+	{ .compatible = "rockchip,rk818" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
 static int rk808_probe(struct i2c_client *client,
 		       const struct i2c_device_id *id)
 {
 	struct device_node *np = client->dev.of_node;
 	struct rk808 *rk808;
+	const struct rk808_reg_data *pre_init_reg;
+	const struct mfd_cell *cells;
+	int nr_pre_init_regs;
+	int nr_cells;
 	int pm_off = 0;
 	int ret;
 	int i;
 
-	if (!client->irq) {
-		dev_err(&client->dev, "No interrupt support, no core IRQ\n");
-		return -EINVAL;
-	}
-
 	rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
 	if (!rk808)
 		return -ENOMEM;
 
-	rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+	rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB);
+	if (rk808->variant < 0) {
+		dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n",
+			RK808_ID_MSB);
+		return rk808->variant;
+	}
+
+	dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
+
+	switch (rk808->variant) {
+	case RK808_ID:
+		rk808->regmap_cfg = &rk808_regmap_config;
+		rk808->regmap_irq_chip = &rk808_irq_chip;
+		pre_init_reg = rk808_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
+		cells = rk808s;
+		nr_cells = ARRAY_SIZE(rk808s);
+		break;
+	case RK818_ID:
+		rk808->regmap_cfg = &rk818_regmap_config;
+		rk808->regmap_irq_chip = &rk818_irq_chip;
+		pre_init_reg = rk818_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
+		cells = rk818s;
+		nr_cells = ARRAY_SIZE(rk818s);
+		break;
+	default:
+		dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
+			rk808->variant);
+		return -EINVAL;
+	}
+
+	rk808->i2c = client;
+	i2c_set_clientdata(client, rk808);
+
+	rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
 	if (IS_ERR(rk808->regmap)) {
 		dev_err(&client->dev, "regmap initialization failed\n");
 		return PTR_ERR(rk808->regmap);
 	}
 
-	for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
-		ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
-					 pre_init_reg[i].mask,
-					 pre_init_reg[i].value);
-		if (ret) {
-			dev_err(&client->dev,
-				"0x%x write err\n", pre_init_reg[i].addr);
-			return ret;
-		}
+	if (!client->irq) {
+		dev_err(&client->dev, "No interrupt support, no core IRQ\n");
+		return -EINVAL;
 	}
 
 	ret = regmap_add_irq_chip(rk808->regmap, client->irq,
 				  IRQF_ONESHOT, -1,
-				  &rk808_irq_chip, &rk808->irq_data);
+				  rk808->regmap_irq_chip, &rk808->irq_data);
 	if (ret) {
 		dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
 		return ret;
 	}
 
-	rk808->i2c = client;
-	i2c_set_clientdata(client, rk808);
+	for (i = 0; i < nr_pre_init_regs; i++) {
+		ret = regmap_update_bits(rk808->regmap,
+					pre_init_reg[i].addr,
+					pre_init_reg[i].mask,
+					pre_init_reg[i].value);
+		if (ret) {
+			dev_err(&client->dev,
+				"0x%x write err\n",
+				pre_init_reg[i].addr);
+			return ret;
+		}
+	}
 
-	ret = devm_mfd_add_devices(&client->dev, -1,
-				   rk808s, ARRAY_SIZE(rk808s), NULL, 0,
-				   regmap_irq_get_domain(rk808->irq_data));
+	ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+			      cells, nr_cells, NULL, 0,
+			      regmap_irq_get_domain(rk808->irq_data));
 	if (ret) {
 		dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
 		goto err_irq;
@@ -245,14 +413,9 @@ static int rk808_remove(struct i2c_client *client)
 	return 0;
 }
 
-static const struct of_device_id rk808_of_match[] = {
-	{ .compatible = "rockchip,rk808" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
 static const struct i2c_device_id rk808_ids[] = {
 	{ "rk808" },
+	{ "rk818" },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, rk808_ids);
@@ -272,4 +435,5 @@ module_i2c_driver(rk808_i2c_driver);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
 MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
-MODULE_DESCRIPTION("RK808 PMIC driver");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK808/RK818 PMIC driver");
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 441b6ee..fc5db6f 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -1,11 +1,15 @@
 /*
- * rk808.h for Rockchip RK808
+ * Register definitions for Rockchip's RK808/RK818 PMIC
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
  *
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
@@ -16,8 +20,8 @@
  * more details.
  */
 
-#ifndef __LINUX_REGULATOR_rk808_H
-#define __LINUX_REGULATOR_rk808_H
+#ifndef __LINUX_REGULATOR_RK808_H
+#define __LINUX_REGULATOR_RK808_H
 
 #include <linux/regulator/machine.h>
 #include <linux/regmap.h>
@@ -28,7 +32,7 @@
 
 #define RK808_DCDC1	0 /* (0+RK808_START) */
 #define RK808_LDO1	4 /* (4+RK808_START) */
-#define RK808_NUM_REGULATORS   14
+#define RK808_NUM_REGULATORS	14
 
 enum rk808_reg {
 	RK808_ID_DCDC1,
@@ -65,6 +69,8 @@ enum rk808_reg {
 #define RK808_RTC_INT_REG	0x12
 #define RK808_RTC_COMP_LSB_REG	0x13
 #define RK808_RTC_COMP_MSB_REG	0x14
+#define RK808_ID_MSB		0x17
+#define RK808_ID_LSB		0x18
 #define RK808_CLK32OUT_REG	0x20
 #define RK808_VB_MON_REG	0x21
 #define RK808_THERMAL_REG	0x22
@@ -115,7 +121,92 @@ enum rk808_reg {
 #define RK808_INT_STS_MSK_REG2	0x4f
 #define RK808_IO_POL_REG	0x50
 
-/* IRQ Definitions */
+/* RK818 */
+#define RK818_DCDC1			0
+#define RK818_LDO1			4
+#define RK818_NUM_REGULATORS		17
+
+enum rk818_reg {
+	RK818_ID_DCDC1,
+	RK818_ID_DCDC2,
+	RK818_ID_DCDC3,
+	RK818_ID_DCDC4,
+	RK818_ID_BOOST,
+	RK818_ID_LDO1,
+	RK818_ID_LDO2,
+	RK818_ID_LDO3,
+	RK818_ID_LDO4,
+	RK818_ID_LDO5,
+	RK818_ID_LDO6,
+	RK818_ID_LDO7,
+	RK818_ID_LDO8,
+	RK818_ID_LDO9,
+	RK818_ID_SWITCH,
+	RK818_ID_HDMI_SWITCH,
+	RK818_ID_OTG_SWITCH,
+};
+
+#define RK818_DCDC_EN_REG		0x23
+#define RK818_LDO_EN_REG		0x24
+#define RK818_SLEEP_SET_OFF_REG1	0x25
+#define RK818_SLEEP_SET_OFF_REG2	0x26
+#define RK818_DCDC_UV_STS_REG		0x27
+#define RK818_DCDC_UV_ACT_REG		0x28
+#define RK818_LDO_UV_STS_REG		0x29
+#define RK818_LDO_UV_ACT_REG		0x2a
+#define RK818_DCDC_PG_REG		0x2b
+#define RK818_LDO_PG_REG		0x2c
+#define RK818_VOUT_MON_TDB_REG		0x2d
+#define RK818_BUCK1_CONFIG_REG		0x2e
+#define RK818_BUCK1_ON_VSEL_REG		0x2f
+#define RK818_BUCK1_SLP_VSEL_REG	0x30
+#define RK818_BUCK2_CONFIG_REG		0x32
+#define RK818_BUCK2_ON_VSEL_REG		0x33
+#define RK818_BUCK2_SLP_VSEL_REG	0x34
+#define RK818_BUCK3_CONFIG_REG		0x36
+#define RK818_BUCK4_CONFIG_REG		0x37
+#define RK818_BUCK4_ON_VSEL_REG		0x38
+#define RK818_BUCK4_SLP_VSEL_REG	0x39
+#define RK818_BOOST_CONFIG_REG		0x3a
+#define RK818_LDO1_ON_VSEL_REG		0x3b
+#define RK818_LDO1_SLP_VSEL_REG		0x3c
+#define RK818_LDO2_ON_VSEL_REG		0x3d
+#define RK818_LDO2_SLP_VSEL_REG		0x3e
+#define RK818_LDO3_ON_VSEL_REG		0x3f
+#define RK818_LDO3_SLP_VSEL_REG		0x40
+#define RK818_LDO4_ON_VSEL_REG		0x41
+#define RK818_LDO4_SLP_VSEL_REG		0x42
+#define RK818_LDO5_ON_VSEL_REG		0x43
+#define RK818_LDO5_SLP_VSEL_REG		0x44
+#define RK818_LDO6_ON_VSEL_REG		0x45
+#define RK818_LDO6_SLP_VSEL_REG		0x46
+#define RK818_LDO7_ON_VSEL_REG		0x47
+#define RK818_LDO7_SLP_VSEL_REG		0x48
+#define RK818_LDO8_ON_VSEL_REG		0x49
+#define RK818_LDO8_SLP_VSEL_REG		0x4a
+#define RK818_BOOST_LDO9_ON_VSEL_REG	0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG	0x55
+#define RK818_DEVCTRL_REG		0x4b
+#define RK818_INT_STS_REG1		0X4c
+#define RK818_INT_STS_MSK_REG1		0x4d
+#define RK818_INT_STS_REG2		0x4e
+#define RK818_INT_STS_MSK_REG2		0x4f
+#define RK818_IO_POL_REG		0x50
+#define RK818_H5V_EN_REG		0x52
+#define RK818_SLEEP_SET_OFF_REG3	0x53
+#define RK818_BOOST_LDO9_ON_VSEL_REG	0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG	0x55
+#define RK818_BOOST_CTRL_REG		0x56
+#define RK818_DCDC_ILMAX		0x90
+#define RK818_USB_CTRL_REG		0xa1
+
+#define RK818_H5V_EN			BIT(0)
+#define RK818_REF_RDY_CTRL		BIT(1)
+#define RK818_USB_ILIM_SEL_MASK		0xf
+#define RK818_USB_ILMIN_2000MA		0x7
+#define RK818_USB_CHG_SD_VSEL_MASK	0x70
+
+/* RK808 IRQ Definitions */
 #define RK808_IRQ_VOUT_LO	0
 #define RK808_IRQ_VB_LO		1
 #define RK808_IRQ_PWRON		2
@@ -137,6 +228,43 @@ enum rk808_reg {
 #define RK808_IRQ_PLUG_IN_INT_MSK	BIT(0)
 #define RK808_IRQ_PLUG_OUT_INT_MSK	BIT(1)
 
+/* RK818 IRQ Definitions */
+#define RK818_IRQ_VOUT_LO	0
+#define RK818_IRQ_VB_LO		1
+#define RK818_IRQ_PWRON		2
+#define RK818_IRQ_PWRON_LP	3
+#define RK818_IRQ_HOTDIE	4
+#define RK818_IRQ_RTC_ALARM	5
+#define RK818_IRQ_RTC_PERIOD	6
+#define RK818_IRQ_USB_OV	7
+#define RK818_IRQ_PLUG_IN	8
+#define RK818_IRQ_PLUG_OUT	9
+#define RK818_IRQ_CHG_OK	10
+#define RK818_IRQ_CHG_TE	11
+#define RK818_IRQ_CHG_TS1	12
+#define RK818_IRQ_TS2		13
+#define RK818_IRQ_CHG_CVTLIM	14
+#define RK818_IRQ_DISCHG_ILIM	7
+
+#define RK818_IRQ_VOUT_LO_MSK		BIT(0)
+#define RK818_IRQ_VB_LO_MSK		BIT(1)
+#define RK818_IRQ_PWRON_MSK		BIT(2)
+#define RK818_IRQ_PWRON_LP_MSK		BIT(3)
+#define RK818_IRQ_HOTDIE_MSK		BIT(4)
+#define RK818_IRQ_RTC_ALARM_MSK		BIT(5)
+#define RK818_IRQ_RTC_PERIOD_MSK	BIT(6)
+#define RK818_IRQ_USB_OV_MSK		BIT(7)
+#define RK818_IRQ_PLUG_IN_MSK		BIT(0)
+#define RK818_IRQ_PLUG_OUT_MSK		BIT(1)
+#define RK818_IRQ_CHG_OK_MSK		BIT(2)
+#define RK818_IRQ_CHG_TE_MSK		BIT(3)
+#define RK818_IRQ_CHG_TS1_MSK		BIT(4)
+#define RK818_IRQ_TS2_MSK		BIT(5)
+#define RK818_IRQ_CHG_CVTLIM_MSK	BIT(6)
+#define RK818_IRQ_DISCHG_ILIM_MSK	BIT(7)
+
+#define RK818_NUM_IRQ		16
+
 #define RK808_VBAT_LOW_2V8	0x00
 #define RK808_VBAT_LOW_2V9	0x01
 #define RK808_VBAT_LOW_3V0	0x02
@@ -191,9 +319,17 @@ enum {
 	BOOST_ILMIN_250MA,
 };
 
+enum {
+	RK808_ID = 0x0000,
+	RK818_ID = 0x8181,
+};
+
 struct rk808 {
-	struct i2c_client *i2c;
-	struct regmap_irq_chip_data *irq_data;
-	struct regmap *regmap;
+	struct i2c_client		*i2c;
+	struct regmap_irq_chip_data	*irq_data;
+	struct regmap			*regmap;
+	long				variant;
+	const struct regmap_config	*regmap_cfg;
+	const struct regmap_irq_chip	*regmap_irq_chip;
 };
-#endif /* __LINUX_REGULATOR_rk808_H */
+#endif /* __LINUX_REGULATOR_RK808_H */
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v8 2/4] regulator: rk808: Add regulator driver for RK818
  2016-08-29 11:07 [PATCH v8 1/4] mfd: RK808: Add RK818 support Wadim Egorov
@ 2016-08-29 11:07 ` Wadim Egorov
  2016-08-29 11:08 ` [PATCH v8 3/4] mfd: dt-bindings: Add RK818 device tree bindings document Wadim Egorov
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Wadim Egorov @ 2016-08-29 11:07 UTC (permalink / raw)
  To: linux-kernel, rtc-linux, devicetree, linux-rockchip
  Cc: robh+dt, mark.rutland, lee.jones, lgirdwood, broonie, a.zummo,
	alexandre.belloni

Add support for the rk818 regulator. The regulator module consists
of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
power OTG and HDMI5V.

The output voltages are configurable and are meant to supply power
to the main processor and other components.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig           |   4 +-
 drivers/regulator/rk808-regulator.c | 143 ++++++++++++++++++++++++++++++++++--
 2 files changed, 138 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6c88e31..d3a86a8 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -635,11 +635,11 @@ config REGULATOR_RC5T583
 	  outputs which can be controlled by i2c communication.
 
 config REGULATOR_RK808
-	tristate "Rockchip RK808 Power regulators"
+	tristate "Rockchip RK808/RK818 Power regulators"
 	depends on MFD_RK808
 	help
 	  Select this option to enable the power regulator of ROCKCHIP
-	  PMIC RK808.
+	  PMIC RK808 and RK818.
 	  This driver supports the control of different power rails of device
 	  through regulator interface. The device supports multiple DCDC/LDO
 	  outputs which can be controlled by i2c communication.
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 40d07ba..5f412a5 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -1,11 +1,15 @@
 /*
- * Regulator driver for Rockchip RK808
+ * Regulator driver for Rockchip RK808/RK818
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
  *
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
@@ -32,6 +36,12 @@
 #define RK808_BUCK4_VSEL_MASK	0xf
 #define RK808_LDO_VSEL_MASK	0x1f
 
+#define RK818_BUCK_VSEL_MASK		0x3f
+#define RK818_BUCK4_VSEL_MASK		0x1f
+#define RK818_LDO_VSEL_MASK		0x1f
+#define RK818_LDO3_ON_VSEL_MASK		0xf
+#define RK818_BOOST_ON_VSEL_MASK	0xe0
+
 /* Ramp rate definitions for buck1 / buck2 only */
 #define RK808_RAMP_RATE_OFFSET		3
 #define RK808_RAMP_RATE_MASK		(3 << RK808_RAMP_RATE_OFFSET)
@@ -454,6 +464,108 @@ static const struct regulator_desc rk808_reg[] = {
 		RK808_DCDC_EN_REG, BIT(6)),
 };
 
+static const struct regulator_desc rk818_reg[] = {
+	{
+		.name = "DCDC_REG1",
+		.supply_name = "vcc1",
+		.of_match = of_match_ptr("DCDC_REG1"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK818_ID_DCDC1,
+		.ops = &rk808_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
+		.n_voltages = 64,
+		.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.enable_reg = RK818_DCDC_EN_REG,
+		.enable_mask = BIT(0),
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG2",
+		.supply_name = "vcc2",
+		.of_match = of_match_ptr("DCDC_REG2"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK818_ID_DCDC2,
+		.ops = &rk808_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
+		.n_voltages = 64,
+		.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.enable_reg = RK818_DCDC_EN_REG,
+		.enable_mask = BIT(1),
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG3",
+		.supply_name = "vcc3",
+		.of_match = of_match_ptr("DCDC_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK818_ID_DCDC3,
+		.ops = &rk808_switch_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 1,
+		.enable_reg = RK818_DCDC_EN_REG,
+		.enable_mask = BIT(2),
+		.owner = THIS_MODULE,
+	},
+	RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
+		RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
+		RK818_DCDC_EN_REG, BIT(3), 0),
+	RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
+		RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
+		RK818_DCDC_EN_REG, BIT(4), 0),
+	RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+		RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(0), 400),
+	RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+		RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(1), 400),
+	{
+		.name = "LDO_REG3",
+		.supply_name = "vcc7",
+		.of_match = of_match_ptr("LDO_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK818_ID_LDO3,
+		.ops = &rk808_reg_ops_ranges,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 16,
+		.linear_ranges = rk808_ldo3_voltage_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
+		.vsel_reg = RK818_LDO3_ON_VSEL_REG,
+		.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
+		.enable_reg = RK818_LDO_EN_REG,
+		.enable_mask = BIT(2),
+		.enable_time = 400,
+		.owner = THIS_MODULE,
+	},
+	RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
+		RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(3), 400),
+	RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
+		RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(4), 400),
+	RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
+		RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(5), 400),
+	RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+		RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(6), 400),
+	RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
+		RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(7), 400),
+	RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
+		RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+		RK818_DCDC_EN_REG, BIT(5), 400),
+	RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
+		RK818_DCDC_EN_REG, BIT(6)),
+	RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
+		RK818_H5V_EN_REG, BIT(0)),
+	RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
+		RK818_DCDC_EN_REG, BIT(7)),
+};
+
 static int rk808_regulator_dt_parse_pdata(struct device *dev,
 				   struct device *client_dev,
 				   struct regmap *map,
@@ -499,7 +611,8 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 	struct regulator_config config = {};
 	struct regulator_dev *rk808_rdev;
 	struct rk808_regulator_data *pdata;
-	int ret, i;
+	const struct regulator_desc *regulators;
+	int ret, i, nregulators;
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -512,14 +625,29 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pdata);
 
+	switch (rk808->variant) {
+	case RK808_ID:
+		regulators = rk808_reg;
+		nregulators = RK808_NUM_REGULATORS;
+		break;
+	case RK818_ID:
+		regulators = rk818_reg;
+		nregulators = RK818_NUM_REGULATORS;
+		break;
+	default:
+		dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
+			rk808->variant);
+		return -EINVAL;
+	}
+
 	config.dev = &client->dev;
 	config.driver_data = pdata;
 	config.regmap = rk808->regmap;
 
 	/* Instantiate the regulators */
-	for (i = 0; i < RK808_NUM_REGULATORS; i++) {
+	for (i = 0; i < nregulators; i++) {
 		rk808_rdev = devm_regulator_register(&pdev->dev,
-						     &rk808_reg[i], &config);
+						     &regulators[i], &config);
 		if (IS_ERR(rk808_rdev)) {
 			dev_err(&client->dev,
 				"failed to register %d regulator\n", i);
@@ -540,8 +668,9 @@ static struct platform_driver rk808_regulator_driver = {
 
 module_platform_driver(rk808_regulator_driver);
 
-MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs");
-MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>");
-MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>");
+MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:rk808-regulator");
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v8 3/4] mfd: dt-bindings: Add RK818 device tree bindings document
  2016-08-29 11:07 [PATCH v8 1/4] mfd: RK808: Add RK818 support Wadim Egorov
  2016-08-29 11:07 ` [PATCH v8 2/4] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
@ 2016-08-29 11:08 ` Wadim Egorov
  2016-08-29 11:08 ` [PATCH v8 4/4] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 Wadim Egorov
  2016-08-31 12:51 ` [GIT PULL] Immutable branch between MFD, Regulator and RTC due for the v4.9 merge window Lee Jones
  3 siblings, 0 replies; 5+ messages in thread
From: Wadim Egorov @ 2016-08-29 11:08 UTC (permalink / raw)
  To: linux-kernel, rtc-linux, devicetree, linux-rockchip
  Cc: robh+dt, mark.rutland, lee.jones, lgirdwood, broonie, a.zummo,
	alexandre.belloni

Add device tree bindings documentation for Rockchip's RK818 PMIC.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/devicetree/bindings/mfd/rk808.txt | 37 +++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 4ca6aab..9636ae8 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,7 +1,11 @@
-RK808 Power Management Integrated Circuit
+RK8XX Power Management Integrated Circuit
+
+The rk8xx family current members:
+rk808
+rk818
 
 Required properties:
-- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk808", "rockchip,rk818"
 - reg: I2C slave address
 - interrupt-parent: The parent interrupt controller.
 - interrupts: the interrupt outputs of the controller.
@@ -13,6 +17,8 @@ Optional properties:
   default output clock name
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
+
+Optional RK808 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
 - vcc2-supply:  The input supply for DCDC_REG2
 - vcc3-supply:  The input supply for DCDC_REG3
@@ -29,7 +35,20 @@ Optional properties:
   the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
   very quickly with no slow ramp time.
 
-Regulators: All the regulators of RK808 to be instantiated shall be
+Optional RK818 properties:
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- boost-supply: The input supply for DCDC_BOOST
+- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply:  The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
+- vcc8-supply:  The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
+- vcc9-supply:  The input supply for LDO_REG9 and SWITCH_REG
+- h_5v-supply:  The input supply for HDMI_SWITCH
+- usb-supply:   The input supply for OTG_SWITCH
+
+Regulators: All the regulators of RK8XX to be instantiated shall be
 listed in a child node named 'regulators'. Each regulator is represented
 by a child node of the 'regulators' node.
 
@@ -48,6 +67,18 @@ number as described in RK808 datasheet.
 	- SWITCH_REGn
 		- valid values for n are 1 to 2
 
+Following regulators of the RK818 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK818 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 9.
+	- SWITCH_REG
+	- HDMI_SWITCH
+	- OTG_SWITCH
+
 Standard regulator bindings are used inside regulator subnodes. Check
   Documentation/devicetree/bindings/regulator/regulator.txt
 for more details
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v8 4/4] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808
  2016-08-29 11:07 [PATCH v8 1/4] mfd: RK808: Add RK818 support Wadim Egorov
  2016-08-29 11:07 ` [PATCH v8 2/4] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
  2016-08-29 11:08 ` [PATCH v8 3/4] mfd: dt-bindings: Add RK818 device tree bindings document Wadim Egorov
@ 2016-08-29 11:08 ` Wadim Egorov
  2016-08-31 12:51 ` [GIT PULL] Immutable branch between MFD, Regulator and RTC due for the v4.9 merge window Lee Jones
  3 siblings, 0 replies; 5+ messages in thread
From: Wadim Egorov @ 2016-08-29 11:08 UTC (permalink / raw)
  To: linux-kernel, rtc-linux, devicetree, linux-rockchip
  Cc: robh+dt, mark.rutland, lee.jones, lgirdwood, broonie, a.zummo,
	alexandre.belloni

The RK808 and RK818 PMICs are using a similar register map.
We can reuse the rtc driver for the RK818 PMIC. So let's add
the RK818 in the Kconfig description.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/rtc/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e215f50..1102e8f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -328,11 +328,11 @@ config RTC_DRV_MAX77686
 	  will be called rtc-max77686.
 
 config RTC_DRV_RK808
-	tristate "Rockchip RK808 RTC"
+	tristate "Rockchip RK808/RK818 RTC"
 	depends on MFD_RK808
 	help
 	  If you say yes here you will get support for the
-	  RTC of RK808 PMIC.
+	  RTC of RK808 and RK818 PMIC.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rk808-rtc.
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [GIT PULL] Immutable branch between MFD, Regulator and RTC due for the v4.9 merge window
  2016-08-29 11:07 [PATCH v8 1/4] mfd: RK808: Add RK818 support Wadim Egorov
                   ` (2 preceding siblings ...)
  2016-08-29 11:08 ` [PATCH v8 4/4] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 Wadim Egorov
@ 2016-08-31 12:51 ` Lee Jones
  3 siblings, 0 replies; 5+ messages in thread
From: Lee Jones @ 2016-08-31 12:51 UTC (permalink / raw)
  To: Wadim Egorov
  Cc: linux-kernel, rtc-linux, devicetree, linux-rockchip, robh+dt,
	mark.rutland, lgirdwood, broonie, a.zummo, alexandre.belloni

Enjoy!

The following changes since commit 694d0d0bb2030d2e36df73e2d23d5770511dbc8d:

  Linux 4.8-rc2 (2016-08-14 19:11:36 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-regulator-rtc-v4.9-1

for you to fetch changes up to 5d2fd5c79e169547fcd4bf363f96cc544fd3489e:

  rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 (2016-08-31 13:48:57 +0100)

----------------------------------------------------------------
Immutable branch between MFD, Regulator and RTC due for the v4.9 merge window

----------------------------------------------------------------
Wadim Egorov (4):
      mfd: rk808: Add RK818 support
      regulator: rk808: Add regulator driver for RK818
      mfd: dt-bindings: Add RK818 device tree bindings document
      rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808

 Documentation/devicetree/bindings/mfd/rk808.txt |  37 +++-
 drivers/mfd/Kconfig                             |   4 +-
 drivers/mfd/rk808.c                             | 226 ++++++++++++++++++++----
 drivers/regulator/Kconfig                       |   4 +-
 drivers/regulator/rk808-regulator.c             | 143 ++++++++++++++-
 drivers/rtc/Kconfig                             |   4 +-
 include/linux/mfd/rk808.h                       | 154 +++++++++++++++-
 7 files changed, 516 insertions(+), 56 deletions(-)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2016-08-31 12:49 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-29 11:07 [PATCH v8 1/4] mfd: RK808: Add RK818 support Wadim Egorov
2016-08-29 11:07 ` [PATCH v8 2/4] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
2016-08-29 11:08 ` [PATCH v8 3/4] mfd: dt-bindings: Add RK818 device tree bindings document Wadim Egorov
2016-08-29 11:08 ` [PATCH v8 4/4] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 Wadim Egorov
2016-08-31 12:51 ` [GIT PULL] Immutable branch between MFD, Regulator and RTC due for the v4.9 merge window Lee Jones

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).