linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zach Brown <zach.brown@ni.com>
To: adrian.hunter@intel.com
Cc: robh+dt@kernel.org, ulf.hansson@linaro.org, mark.rutland@arm.com,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, michal.simek@xilinx.com,
	soren.brinkmann@xilinx.com, linux-arm-kernel@lists.infradead.org,
	zach.brown@ni.com
Subject: [PATCH 2/2] sdhci-of-arasan: Set controller to test mode when fails-without-test-cd is present
Date: Mon, 29 Aug 2016 18:20:57 -0500	[thread overview]
Message-ID: <1472512857-13063-2-git-send-email-zach.brown@ni.com> (raw)
In-Reply-To: <1472512857-13063-1-git-send-email-zach.brown@ni.com>

The sdhci controller on xilinx zynq devices will not function unless
the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
In cases where it is impossible to provide the CD bit in hardware,
setting the controller to test mode and then setting inserted to true
will get the controller to function without the CD bit.

When the device has the property fails-without-test-cd the driver
changes the controller to test mode and sets test inserted to true to
make the controller function.

Signed-off-by: Zach Brown <zach.brown@ni.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 34 +++++++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci.h           |  2 ++
 2 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index e0f193f..c3e5145 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -26,6 +26,7 @@
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include "sdhci-pltfm.h"
+#include <linux/of.h>

 #define SDHCI_ARASAN_CLK_CTRL_OFFSET	0x2c
 #define SDHCI_ARASAN_VENDOR_REGISTER	0x78
@@ -92,6 +93,12 @@ struct sdhci_arasan_data {

 	struct regmap	*soc_ctl_base;
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
+
+	unsigned int arasan_quirks; /* Arasan deviations from spec */
+
+/* Controller does not have CD wired and will not function normally without */
+#define SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD (1<<0)
+
 };

 static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = {
@@ -203,12 +210,32 @@ static void sdhci_arasan_hs400_enhanced_strobe(struct mmc_host *mmc,
 	writel(vendor, host->ioaddr + SDHCI_ARASAN_VENDOR_REGISTER);
 }

+void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
+{
+	u8 ctrl;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_arasan_data *sdhci_arasan;
+
+	sdhci_reset(host, mask);
+
+	pltfm_host = sdhci_priv(host);
+	sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+
+	if (sdhci_arasan->arasan_quirks &
+	    SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD) {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		ctrl |= SDHCI_CTRL_CDTEST_INS |
+			SDHCI_CTRL_CDTEST_EN;
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
+}
+
 static struct sdhci_ops sdhci_arasan_ops = {
 	.set_clock = sdhci_arasan_set_clock,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.get_timeout_clock = sdhci_arasan_get_timeout_clock,
 	.set_bus_width = sdhci_set_bus_width,
-	.reset = sdhci_reset,
+	.reset = sdhci_arasan_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };

@@ -516,6 +543,11 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 	}

 	sdhci_get_of_property(pdev);
+
+	if (of_get_property(pdev->dev.of_node, "fails-without-test-cd", NULL))
+		sdhci_arasan->arasan_quirks |=
+				SDHCI_ARASAN_QUIRK_FAILS_WITHOUT_TEST_CD;
+
 	pltfm_host->clk = clk_xin;

 	sdhci_arasan_update_baseclkfreq(host);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0411c9f..8d92d6e9 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -84,6 +84,8 @@
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
 #define   SDHCI_CTRL_8BITBUS	0x20
+#define  SDHCI_CTRL_CDTEST_INS   0x40
+#define  SDHCI_CTRL_CDTEST_EN     0x80

 #define SDHCI_POWER_CONTROL	0x29
 #define  SDHCI_POWER_ON		0x01
--
2.7.4

  reply	other threads:[~2016-08-29 23:21 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-29 23:20 [PATCH 1/2] sdhci-of-arasan: Add device tree parameter fails-without-test-cd bit Zach Brown
2016-08-29 23:20 ` Zach Brown [this message]
2016-08-30  5:47   ` [PATCH 2/2] sdhci-of-arasan: Set controller to test mode when fails-without-test-cd is present Michal Simek
2016-09-06 18:51     ` Zach Brown
2016-09-07  5:13       ` Michal Simek
2016-09-02 14:45 ` [PATCH 1/2] sdhci-of-arasan: Add device tree parameter fails-without-test-cd bit Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1472512857-13063-2-git-send-email-zach.brown@ni.com \
    --to=zach.brown@ni.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=soren.brinkmann@xilinx.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).