From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752389AbcJIPM7 (ORCPT ); Sun, 9 Oct 2016 11:12:59 -0400 Received: from mail-lf0-f67.google.com ([209.85.215.67]:34181 "EHLO mail-lf0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751056AbcJIPMH (ORCPT ); Sun, 9 Oct 2016 11:12:07 -0400 From: Sergio Paracuellos To: gregkh@linuxfoundation.org Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org Subject: [PATCH 03/15] staging: wlan-ng: fix block comment warnings in p80211conv.c Date: Sun, 9 Oct 2016 17:10:20 +0200 Message-Id: <1476025832-15174-4-git-send-email-sergio.paracuellos@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1476025832-15174-1-git-send-email-sergio.paracuellos@gmail.com> References: <20161009143102.GA4231@kroah.com> <1476025832-15174-1-git-send-email-sergio.paracuellos@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch fix the following checkpatch.pl warnings in p80211conv.c: WARNING: Block comments should align the * on each line Signed-off-by: Sergio Paracuellos --- drivers/staging/wlan-ng/p80211conv.c | 318 +++++++++++++++++------------------ 1 file changed, 159 insertions(+), 159 deletions(-) diff --git a/drivers/staging/wlan-ng/p80211conv.c b/drivers/staging/wlan-ng/p80211conv.c index 0247cbc..5c0e658 100644 --- a/drivers/staging/wlan-ng/p80211conv.c +++ b/drivers/staging/wlan-ng/p80211conv.c @@ -1,56 +1,56 @@ /* src/p80211/p80211conv.c -* -* Ether/802.11 conversions and packet buffer routines -* -* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -* -------------------------------------------------------------------- -* -* linux-wlan -* -* The contents of this file are subject to the Mozilla Public -* License Version 1.1 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.mozilla.org/MPL/ -* -* Software distributed under the License is distributed on an "AS -* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* Alternatively, the contents of this file may be used under the -* terms of the GNU Public License version 2 (the "GPL"), in which -* case the provisions of the GPL are applicable instead of the -* above. If you wish to allow the use of your version of this file -* only under the terms of the GPL and not to allow others to use -* your version of this file under the MPL, indicate your decision -* by deleting the provisions above and replace them with the notice -* and other provisions required by the GPL. If you do not delete -* the provisions above, a recipient may use your version of this -* file under either the MPL or the GPL. -* -* -------------------------------------------------------------------- -* -* Inquiries regarding the linux-wlan Open Source project can be -* made directly to: -* -* AbsoluteValue Systems Inc. -* info@linux-wlan.com -* http://www.linux-wlan.com -* -* -------------------------------------------------------------------- -* -* Portions of the development of this software were funded by -* Intersil Corporation as part of PRISM(R) chipset product development. -* -* -------------------------------------------------------------------- -* -* This file defines the functions that perform Ethernet to/from -* 802.11 frame conversions. -* -* -------------------------------------------------------------------- -* -*================================================================ -*/ + * + * Ether/802.11 conversions and packet buffer routines + * + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * -------------------------------------------------------------------- + * + * linux-wlan + * + * The contents of this file are subject to the Mozilla Public + * License Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU Public License version 2 (the "GPL"), in which + * case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision + * by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL. If you do not delete + * the provisions above, a recipient may use your version of this + * file under either the MPL or the GPL. + * + * -------------------------------------------------------------------- + * + * Inquiries regarding the linux-wlan Open Source project can be + * made directly to: + * + * AbsoluteValue Systems Inc. + * info@linux-wlan.com + * http://www.linux-wlan.com + * + * -------------------------------------------------------------------- + * + * Portions of the development of this software were funded by + * Intersil Corporation as part of PRISM(R) chipset product development. + * + * -------------------------------------------------------------------- + * + * This file defines the functions that perform Ethernet to/from + * 802.11 frame conversions. + * + * -------------------------------------------------------------------- + * + *================================================================ + */ #include #include @@ -79,31 +79,31 @@ static const u8 oui_8021h[] = { 0x00, 0x00, 0xf8 }; /*---------------------------------------------------------------- -* p80211pb_ether_to_80211 -* -* Uses the contents of the ether frame and the etherconv setting -* to build the elements of the 802.11 frame. -* -* We don't actually set -* up the frame header here. That's the MAC's job. We're only handling -* conversion of DIXII or 802.3+LLC frames to something that works -* with 802.11. -* -* Note -- 802.11 header is NOT part of the skb. Likewise, the 802.11 -* FCS is also not present and will need to be added elsewhere. -* -* Arguments: -* ethconv Conversion type to perform -* skb skbuff containing the ether frame -* p80211_hdr 802.11 header -* -* Returns: -* 0 on success, non-zero otherwise -* -* Call context: -* May be called in interrupt or non-interrupt context -*---------------------------------------------------------------- -*/ + * p80211pb_ether_to_80211 + * + * Uses the contents of the ether frame and the etherconv setting + * to build the elements of the 802.11 frame. + * + * We don't actually set + * up the frame header here. That's the MAC's job. We're only handling + * conversion of DIXII or 802.3+LLC frames to something that works + * with 802.11. + * + * Note -- 802.11 header is NOT part of the skb. Likewise, the 802.11 + * FCS is also not present and will need to be added elsewhere. + * + * Arguments: + * ethconv Conversion type to perform + * skb skbuff containing the ether frame + * p80211_hdr 802.11 header + * + * Returns: + * 0 on success, non-zero otherwise + * + * Call context: + * May be called in interrupt or non-interrupt context + *---------------------------------------------------------------- + */ int skb_ether_to_p80211(struct wlandevice *wlandev, u32 ethconv, struct sk_buff *skb, union p80211_hdr *p80211_hdr, struct p80211_metawep *p80211_wep) @@ -255,25 +255,25 @@ static void orinoco_spy_gather(struct wlandevice *wlandev, char *mac, } /*---------------------------------------------------------------- -* p80211pb_80211_to_ether -* -* Uses the contents of a received 802.11 frame and the etherconv -* setting to build an ether frame. -* -* This function extracts the src and dest address from the 802.11 -* frame to use in the construction of the eth frame. -* -* Arguments: -* ethconv Conversion type to perform -* skb Packet buffer containing the 802.11 frame -* -* Returns: -* 0 on success, non-zero otherwise -* -* Call context: -* May be called in interrupt or non-interrupt context -*---------------------------------------------------------------- -*/ + * p80211pb_80211_to_ether + * + * Uses the contents of a received 802.11 frame and the etherconv + * setting to build an ether frame. + * + * This function extracts the src and dest address from the 802.11 + * frame to use in the construction of the eth frame. + * + * Arguments: + * ethconv Conversion type to perform + * skb Packet buffer containing the 802.11 frame + * + * Returns: + * 0 on success, non-zero otherwise + * + * Call context: + * May be called in interrupt or non-interrupt context + *---------------------------------------------------------------- + */ int skb_p80211_to_ether(struct wlandevice *wlandev, u32 ethconv, struct sk_buff *skb) { @@ -508,22 +508,22 @@ int skb_p80211_to_ether(struct wlandevice *wlandev, u32 ethconv, } /*---------------------------------------------------------------- -* p80211_stt_findproto -* -* Searches the 802.1h Selective Translation Table for a given -* protocol. -* -* Arguments: -* proto protocol number (in host order) to search for. -* -* Returns: -* 1 - if the table is empty or a match is found. -* 0 - if the table is non-empty and a match is not found. -* -* Call context: -* May be called in interrupt or non-interrupt context -*---------------------------------------------------------------- -*/ + * p80211_stt_findproto + * + * Searches the 802.1h Selective Translation Table for a given + * protocol. + * + * Arguments: + * proto protocol number (in host order) to search for. + * + * Returns: + * 1 - if the table is empty or a match is found. + * 0 - if the table is non-empty and a match is not found. + * + * Call context: + * May be called in interrupt or non-interrupt context + *---------------------------------------------------------------- + */ int p80211_stt_findproto(u16 proto) { /* Always return found for now. This is the behavior used by the */ @@ -540,21 +540,21 @@ int p80211_stt_findproto(u16 proto) } /*---------------------------------------------------------------- -* p80211skb_rxmeta_detach -* -* Disconnects the frmmeta and rxmeta from an skb. -* -* Arguments: -* wlandev The wlandev this skb belongs to. -* skb The skb we're attaching to. -* -* Returns: -* 0 on success, non-zero otherwise -* -* Call context: -* May be called in interrupt or non-interrupt context -*---------------------------------------------------------------- -*/ + * p80211skb_rxmeta_detach + * + * Disconnects the frmmeta and rxmeta from an skb. + * + * Arguments: + * wlandev The wlandev this skb belongs to. + * skb The skb we're attaching to. + * + * Returns: + * 0 on success, non-zero otherwise + * + * Call context: + * May be called in interrupt or non-interrupt context + *---------------------------------------------------------------- + */ void p80211skb_rxmeta_detach(struct sk_buff *skb) { struct p80211_rxmeta *rxmeta; @@ -584,22 +584,22 @@ void p80211skb_rxmeta_detach(struct sk_buff *skb) } /*---------------------------------------------------------------- -* p80211skb_rxmeta_attach -* -* Allocates a p80211rxmeta structure, initializes it, and attaches -* it to an skb. -* -* Arguments: -* wlandev The wlandev this skb belongs to. -* skb The skb we're attaching to. -* -* Returns: -* 0 on success, non-zero otherwise -* -* Call context: -* May be called in interrupt or non-interrupt context -*---------------------------------------------------------------- -*/ + * p80211skb_rxmeta_attach + * + * Allocates a p80211rxmeta structure, initializes it, and attaches + * it to an skb. + * + * Arguments: + * wlandev The wlandev this skb belongs to. + * skb The skb we're attaching to. + * + * Returns: + * 0 on success, non-zero otherwise + * + * Call context: + * May be called in interrupt or non-interrupt context + *---------------------------------------------------------------- + */ int p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb) { int result = 0; @@ -638,22 +638,22 @@ int p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb) } /*---------------------------------------------------------------- -* p80211skb_free -* -* Frees an entire p80211skb by checking and freeing the meta struct -* and then freeing the skb. -* -* Arguments: -* wlandev The wlandev this skb belongs to. -* skb The skb we're attaching to. -* -* Returns: -* 0 on success, non-zero otherwise -* -* Call context: -* May be called in interrupt or non-interrupt context -*---------------------------------------------------------------- -*/ + * p80211skb_free + * + * Frees an entire p80211skb by checking and freeing the meta struct + * and then freeing the skb. + * + * Arguments: + * wlandev The wlandev this skb belongs to. + * skb The skb we're attaching to. + * + * Returns: + * 0 on success, non-zero otherwise + * + * Call context: + * May be called in interrupt or non-interrupt context + *---------------------------------------------------------------- + */ void p80211skb_free(struct wlandevice *wlandev, struct sk_buff *skb) { struct p80211_frmmeta *meta; -- 1.9.1