From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755894AbcJMMLz (ORCPT ); Thu, 13 Oct 2016 08:11:55 -0400 Received: from mx1.redhat.com ([209.132.183.28]:47684 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754804AbcJMMLJ (ORCPT ); Thu, 13 Oct 2016 08:11:09 -0400 From: Benjamin Tissoires To: Dmitry Torokhov , Wolfram Sang , linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Jean Delvare Subject: [PATCH v5 5/6] i2c: i801: remove SMBNTFDDAT reads as they always seem to return 0 Date: Thu, 13 Oct 2016 14:10:39 +0200 Message-Id: <1476360640-12901-6-git-send-email-benjamin.tissoires@redhat.com> In-Reply-To: <1476360640-12901-1-git-send-email-benjamin.tissoires@redhat.com> References: <1476360640-12901-1-git-send-email-benjamin.tissoires@redhat.com> X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.5.16 (mx1.redhat.com [10.5.110.27]); Thu, 13 Oct 2016 12:10:52 +0000 (UTC) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On the platform tested, reading SMBNTFDDAT always returns 0 (using 1 read of a word or 2 of 2 bytes). Given that we are not sure why and that we don't need to rely on the data parameter in the current users of Host Notify, remove this part of the code. If someone wants to re-enable it, just revert this commit and data should be available. Signed-off-by: Benjamin Tissoires --- no changes in v5 no changes in v4 no changes in v3 new in v2 --- drivers/i2c/busses/i2c-i801.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 88b2e31..42a6a89 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -117,7 +117,6 @@ #define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */ #define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */ #define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */ -#define SMBNTFDDAT(p) (22 + (p)->smba) /* ICH3 and later */ /* PCI Address Constants */ #define SMBBAR 4 @@ -578,12 +577,15 @@ static void i801_isr_byte_done(struct i801_priv *priv) static irqreturn_t i801_host_notify_isr(struct i801_priv *priv) { unsigned short addr; - unsigned int data; addr = inb_p(SMBNTFDADD(priv)) >> 1; - data = inw_p(SMBNTFDDAT(priv)); - i2c_handle_smbus_host_notify(priv->host_notify, addr, data); + /* + * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba) + * always returns 0 and is safe to read. + * We just use 0 given we have no use of the data right now. + */ + i2c_handle_smbus_host_notify(priv->host_notify, addr, 0); /* clear Host Notify bit and return */ outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); -- 2.7.4