From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756584AbcJMP4Z (ORCPT ); Thu, 13 Oct 2016 11:56:25 -0400 Received: from mx1.redhat.com ([209.132.183.28]:38526 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755469AbcJMPvd (ORCPT ); Thu, 13 Oct 2016 11:51:33 -0400 From: Benjamin Tissoires To: Dmitry Torokhov , Andrew Duggan , Lyude Paul , Christopher Heiny , Nick Dyer , Bjorn Andersson , Dennis Wassenberg Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org Subject: [PATCH v3 06/18] Input: synaptics-rmi4 - Set the ABS_MT_TOOL_TYPE bit to report tool type Date: Thu, 13 Oct 2016 17:51:00 +0200 Message-Id: <1476373872-18027-7-git-send-email-benjamin.tissoires@redhat.com> In-Reply-To: <1476373872-18027-1-git-send-email-benjamin.tissoires@redhat.com> References: <1476373872-18027-1-git-send-email-benjamin.tissoires@redhat.com> X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.5.16 (mx1.redhat.com [10.5.110.31]); Thu, 13 Oct 2016 15:51:32 +0000 (UTC) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Andrew Duggan The rmi4 2D sensor functions report the tool type via input_mt_report_slot_state(), but the abs parameter bit has not been set so the tool type is not reported to userspace. This patch set the ABS_MT_TOOL_TYPE bit. Signed-off-by: Andrew Duggan Signed-off-by: Benjamin Tissoires --- new in v3 --- drivers/input/rmi4/rmi_2d_sensor.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/rmi4/rmi_2d_sensor.c b/drivers/input/rmi4/rmi_2d_sensor.c index e97bd7f..0747890 100644 --- a/drivers/input/rmi4/rmi_2d_sensor.c +++ b/drivers/input/rmi4/rmi_2d_sensor.c @@ -181,6 +181,8 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor) input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0); input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0); input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0); + input_set_abs_params(input, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, + 0, 0); if (sensor->sensor_type == rmi_sensor_touchpad) input_flags = INPUT_MT_POINTER; -- 2.7.4