linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: f.fainelli@gmail.com, khilman@baylibre.com, carlo@caione.org,
	andrew@lunn.ch
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	netdev@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [RFC PATCH v2 2/5] net: phy: Add Meson GXL Internal PHY driver
Date: Mon, 31 Oct 2016 17:56:24 +0100	[thread overview]
Message-ID: <1477932987-27871-3-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1477932987-27871-1-git-send-email-narmstrong@baylibre.com>

Add driver for the Internal RMII PHY found in the Amlogic Meson GXL SoCs.

This PHY seems to only implement some standard registers and need some
workarounds to provide autoneg values from vendor registers.

Some magic values are currently used to configure the PHY, and this a
temporary setup until clarification about these registers names and
registers fields are provided by Amlogic.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/net/phy/Kconfig     |  5 +++
 drivers/net/phy/Makefile    |  1 +
 drivers/net/phy/meson-gxl.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 87 insertions(+)
 create mode 100644 drivers/net/phy/meson-gxl.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 2651c8d..09342b6 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -226,6 +226,11 @@ config DP83867_PHY
 	---help---
 	  Currently supports the DP83867 PHY.
 
+config MESON_GXL_PHY
+	tristate "Amlogic Meson GXL Internal PHY"
+	---help---
+	  Currently has a driver for the Amlogic Meson GXL Internal PHY
+
 config FIXED_PHY
 	tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index e58667d..1511b3e 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o
+obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
 obj-$(CONFIG_MICROSEMI_PHY)	+= mscc.o
 obj-$(CONFIG_NATIONAL_PHY)	+= national.o
 obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
new file mode 100644
index 0000000..1ea69b7
--- /dev/null
+++ b/drivers/net/phy/meson-gxl.c
@@ -0,0 +1,81 @@
+/*
+ * Amlogic Meson GXL Internal PHY Driver
+ *
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ * Copyright (C) 2016 BayLibre, SAS. All rights reserved.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+static int meson_gxl_config_init(struct phy_device *phydev)
+{
+	/* Enable Analog and DSP register Bank access by */
+	phy_write(phydev, 0x14, 0x0000);
+	phy_write(phydev, 0x14, 0x0400);
+	phy_write(phydev, 0x14, 0x0000);
+	phy_write(phydev, 0x14, 0x0400);
+
+	/* Write Analog register 23 */
+	phy_write(phydev, 0x17, 0x8E0D);
+	phy_write(phydev, 0x14, 0x4417);
+
+	/* Enable fractional PLL */
+	phy_write(phydev, 0x17, 0x0005);
+	phy_write(phydev, 0x14, 0x5C1B);
+
+	/* Program fraction FR_PLL_DIV1 */
+	phy_write(phydev, 0x17, 0x029A);
+	phy_write(phydev, 0x14, 0x5C1D);
+
+	/* Program fraction FR_PLL_DIV1 */
+	phy_write(phydev, 0x17, 0xAAAA);
+	phy_write(phydev, 0x14, 0x5C1C);
+
+	return 0;
+}
+
+static struct phy_driver meson_gxl_phy[] = {
+	{
+		.phy_id		= 0x01814400,
+		.phy_id_mask	= 0xfffffff0,
+		.name		= "Meson GXL Internal PHY",
+		.features	= PHY_BASIC_FEATURES,
+		.flags		= PHY_IS_INTERNAL,
+		.config_init	= meson_gxl_config_init,
+		.config_aneg	= genphy_config_aneg,
+		.aneg_done      = genphy_aneg_done,
+		.read_status	= genphy_read_status,
+		.suspend        = genphy_suspend,
+		.resume         = genphy_resume,
+	},
+};
+
+static struct mdio_device_id __maybe_unused meson_gxl_tbl[] = {
+	{ 0x01814400, 0xfffffff0 },
+	{ }
+};
+
+module_phy_driver(meson_gxl_phy);
+
+MODULE_DEVICE_TABLE(mdio, meson_gxl_tbl);
+
+MODULE_DESCRIPTION("Amlogic Meson GXL Internal PHY driver");
+MODULE_AUTHOR("Baoqi wang");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("GPL");
-- 
1.9.1

  parent reply	other threads:[~2016-10-31 16:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-31 16:56 [RFC PATCH v2 0/5] ARM64: Add Internal PHY support for Meson GXL Neil Armstrong
2016-10-31 16:56 ` [RFC PATCH v2 1/5] net: mdio-mux-mmioreg: Add support for 16bit and 32bit register sizes Neil Armstrong
2016-10-31 18:59   ` Andrew Lunn
2016-11-09 18:26   ` Rob Herring
2016-10-31 16:56 ` Neil Armstrong [this message]
2016-10-31 19:05   ` [RFC PATCH v2 2/5] net: phy: Add Meson GXL Internal PHY driver Andrew Lunn
2016-11-02 10:33     ` Neil Armstrong
2016-10-31 16:56 ` [RFC PATCH v2 3/5] ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY Neil Armstrong
2016-11-01  9:48   ` Sergei Shtylyov
2016-10-31 16:56 ` [RFC PATCH v2 4/5] ARM64: dts: meson-gxl-p23x: Enable ethernet Neil Armstrong
2016-10-31 16:56 ` [RFC PATCH v2 5/5] ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY Neil Armstrong
2016-11-04 10:55 ` [RFC PATCH v2 0/5] ARM64: Add Internal PHY support for Meson GXL Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477932987-27871-3-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=andrew@lunn.ch \
    --cc=carlo@caione.org \
    --cc=f.fainelli@gmail.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).