linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Philippe Reynes <tremyfr@gmail.com>
To: thomas.lendacky@amd.com, davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH] net: xgbe: use new api ethtool_{get|set}_link_ksettings
Date: Sun,  6 Nov 2016 14:57:04 +0100	[thread overview]
Message-ID: <1478440624-23565-1-git-send-email-tremyfr@gmail.com> (raw)

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c |   68 ++++++++++++++------------
 1 files changed, 37 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index 46c959b..920566a 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -272,80 +272,86 @@ static int xgbe_set_pauseparam(struct net_device *netdev,
 	return ret;
 }
 
-static int xgbe_get_settings(struct net_device *netdev,
-			     struct ethtool_cmd *cmd)
+static int xgbe_get_link_ksettings(struct net_device *netdev,
+				   struct ethtool_link_ksettings *cmd)
 {
 	struct xgbe_prv_data *pdata = netdev_priv(netdev);
 
-	cmd->phy_address = pdata->phy.address;
+	cmd->base.phy_address = pdata->phy.address;
 
-	cmd->supported = pdata->phy.supported;
-	cmd->advertising = pdata->phy.advertising;
-	cmd->lp_advertising = pdata->phy.lp_advertising;
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+						pdata->phy.supported);
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+						pdata->phy.advertising);
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising,
+						pdata->phy.lp_advertising);
 
-	cmd->autoneg = pdata->phy.autoneg;
-	ethtool_cmd_speed_set(cmd, pdata->phy.speed);
-	cmd->duplex = pdata->phy.duplex;
+	cmd->base.autoneg = pdata->phy.autoneg;
+	cmd->base.speed = pdata->phy.speed;
+	cmd->base.duplex = pdata->phy.duplex;
 
-	cmd->port = PORT_NONE;
-	cmd->transceiver = XCVR_INTERNAL;
+	cmd->base.port = PORT_NONE;
 
 	return 0;
 }
 
-static int xgbe_set_settings(struct net_device *netdev,
-			     struct ethtool_cmd *cmd)
+static int xgbe_set_link_ksettings(struct net_device *netdev,
+				   const struct ethtool_link_ksettings *cmd)
 {
 	struct xgbe_prv_data *pdata = netdev_priv(netdev);
+	u32 advertising;
 	u32 speed;
 	int ret;
 
-	speed = ethtool_cmd_speed(cmd);
+	speed = cmd->base.speed;
 
-	if (cmd->phy_address != pdata->phy.address) {
+	if (cmd->base.phy_address != pdata->phy.address) {
 		netdev_err(netdev, "invalid phy address %hhu\n",
-			   cmd->phy_address);
+			   cmd->base.phy_address);
 		return -EINVAL;
 	}
 
-	if ((cmd->autoneg != AUTONEG_ENABLE) &&
-	    (cmd->autoneg != AUTONEG_DISABLE)) {
+	if ((cmd->base.autoneg != AUTONEG_ENABLE) &&
+	    (cmd->base.autoneg != AUTONEG_DISABLE)) {
 		netdev_err(netdev, "unsupported autoneg %hhu\n",
-			   cmd->autoneg);
+			   cmd->base.autoneg);
 		return -EINVAL;
 	}
 
-	if (cmd->autoneg == AUTONEG_DISABLE) {
+	if (cmd->base.autoneg == AUTONEG_DISABLE) {
 		if (!pdata->phy_if.phy_valid_speed(pdata, speed)) {
 			netdev_err(netdev, "unsupported speed %u\n", speed);
 			return -EINVAL;
 		}
 
-		if (cmd->duplex != DUPLEX_FULL) {
+		if (cmd->base.duplex != DUPLEX_FULL) {
 			netdev_err(netdev, "unsupported duplex %hhu\n",
-				   cmd->duplex);
+				   cmd->base.duplex);
 			return -EINVAL;
 		}
 	}
 
+	ethtool_convert_link_mode_to_legacy_u32(&advertising,
+						cmd->link_modes.advertising);
+
 	netif_dbg(pdata, link, netdev,
 		  "requested advertisement %#x, phy supported %#x\n",
-		  cmd->advertising, pdata->phy.supported);
+		  advertising, pdata->phy.supported);
 
-	cmd->advertising &= pdata->phy.supported;
-	if ((cmd->autoneg == AUTONEG_ENABLE) && !cmd->advertising) {
+	advertising &= pdata->phy.supported;
+	if ((cmd->base.autoneg == AUTONEG_ENABLE) && !advertising) {
 		netdev_err(netdev,
 			   "unsupported requested advertisement\n");
 		return -EINVAL;
 	}
 
 	ret = 0;
-	pdata->phy.autoneg = cmd->autoneg;
+	pdata->phy.autoneg = cmd->base.autoneg;
 	pdata->phy.speed = speed;
-	pdata->phy.duplex = cmd->duplex;
-	pdata->phy.advertising = cmd->advertising;
+	pdata->phy.duplex = cmd->base.duplex;
+	pdata->phy.advertising = advertising;
 
-	if (cmd->autoneg == AUTONEG_ENABLE)
+	if (cmd->base.autoneg == AUTONEG_ENABLE)
 		pdata->phy.advertising |= ADVERTISED_Autoneg;
 	else
 		pdata->phy.advertising &= ~ADVERTISED_Autoneg;
@@ -585,8 +591,6 @@ static int xgbe_get_ts_info(struct net_device *netdev,
 }
 
 static const struct ethtool_ops xgbe_ethtool_ops = {
-	.get_settings = xgbe_get_settings,
-	.set_settings = xgbe_set_settings,
 	.get_drvinfo = xgbe_get_drvinfo,
 	.get_msglevel = xgbe_get_msglevel,
 	.set_msglevel = xgbe_set_msglevel,
@@ -604,6 +608,8 @@ static int xgbe_get_ts_info(struct net_device *netdev,
 	.get_rxfh = xgbe_get_rxfh,
 	.set_rxfh = xgbe_set_rxfh,
 	.get_ts_info = xgbe_get_ts_info,
+	.get_link_ksettings = xgbe_get_link_ksettings,
+	.set_link_ksettings = xgbe_set_link_ksettings,
 };
 
 const struct ethtool_ops *xgbe_get_ethtool_ops(void)
-- 
1.7.4.4

             reply	other threads:[~2016-11-06 13:57 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-06 13:57 Philippe Reynes [this message]
2016-11-07 14:31 ` [PATCH] net: xgbe: use new api ethtool_{get|set}_link_ksettings Tom Lendacky
2016-11-09 18:25 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1478440624-23565-1-git-send-email-tremyfr@gmail.com \
    --to=tremyfr@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=thomas.lendacky@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).