linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rick Chang <rick.chang@mediatek.com>
To: Hans Verkuil <hans.verkuil@cisco.com>,
	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
	<srv_heupstream@mediatek.com>,
	<linux-mediatek@lists.infradead.org>,
	Minghsiu Tsai <minghsiu.tsai@mediatek.com>,
	Rick Chang <rick.chang@mediatek.com>
Subject: [PATCH v4 1/3] dt-bindings: mediatek: Add a binding for Mediatek JPEG Decoder
Date: Mon, 7 Nov 2016 14:57:17 +0800	[thread overview]
Message-ID: <1478501839-2775-2-git-send-email-rick.chang@mediatek.com> (raw)
In-Reply-To: <1478501839-2775-1-git-send-email-rick.chang@mediatek.com>

Add a DT binding documentation for Mediatek JPEG Decoder of
MT2701 SoC.

Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
---
 .../bindings/media/mediatek-jpeg-codec.txt         | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt

diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt
new file mode 100644
index 0000000..c7dbcc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt
@@ -0,0 +1,35 @@
+* Mediatek JPEG Decoder
+
+Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+Required properties:
+- compatible : "mediatek,jpgdec"
+- reg : physical base address of the jpeg decoder registers and length of
+  memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgdec-smi" and "jpgdec".
+- power-domains: a phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current Socs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+
+Example:
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
-- 
1.9.1

  reply	other threads:[~2016-11-07  6:58 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-07  6:57 [PATCH v4 0/3] Add Mediatek JPEG Decoder Rick Chang
2016-11-07  6:57 ` Rick Chang [this message]
2016-11-07 17:00   ` [PATCH v4 1/3] dt-bindings: mediatek: Add a binding for " Matthias Brugger
2016-11-08  2:23     ` Rick Chang
2016-11-07  6:57 ` [PATCH v4 2/3] vcodec: mediatek: Add Mediatek JPEG Decoder Driver Rick Chang
2016-11-07  6:57 ` [PATCH v4 3/3] arm: dts: mt2701: Add node for Mediatek JPEG Decoder Rick Chang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1478501839-2775-2-git-send-email-rick.chang@mediatek.com \
    --to=rick.chang@mediatek.com \
    --cc=hans.verkuil@cisco.com \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=minghsiu.tsai@mediatek.com \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).