linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] media: i2c-polling: add i2c-polling driver
@ 2016-11-08  6:00 Matt Ranostay
  2016-11-08  6:51 ` kbuild test robot
       [not found] ` <CANgUfueAGBgM3MtzH1qvgaPFM9JsCSCsy2J0tmjGkT_krrpzaQ@mail.gmail.com>
  0 siblings, 2 replies; 3+ messages in thread
From: Matt Ranostay @ 2016-11-08  6:00 UTC (permalink / raw)
  To: linux-kernel, linux-media
  Cc: Matt Ranostay, Attila Kinali, Marek Vasut, Luca Barbato

There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.

Cc: Attila Kinali <attila@kinali.ch>
Cc: Marek Vasut <marex@denx.de>
Cc: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
---
Changes from v1:
* correct i2c_polling_remove() operations
* fixed delay calcuation in buffer_queue()
* add include linux/slab.h

 drivers/media/i2c/Kconfig       |   8 +
 drivers/media/i2c/Makefile      |   1 +
 drivers/media/i2c/i2c-polling.c | 469 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 478 insertions(+)
 create mode 100644 drivers/media/i2c/i2c-polling.c

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 2669b4bad910..6346eeecfaae 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -768,6 +768,14 @@ config VIDEO_M52790
 
 	 To compile this driver as a module, choose M here: the
 	 module will be called m52790.
+
+config VIDEO_I2C_POLLING
+	tristate "I2C polling video support"
+	depends on VIDEO_V4L2 && I2C
+	select VIDEOBUF2_VMALLOC
+	---help---
+	  Enable the I2C polling video support which supports the following:
+	   * Panasonic AMG88xx Grid-Eye Sensors
 endmenu
 
 menu "Sensors used on soc_camera driver"
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 92773b2e6225..8182ec9f66b9 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_VIDEO_LM3646)	+= lm3646.o
 obj-$(CONFIG_VIDEO_SMIAPP_PLL)	+= smiapp-pll.o
 obj-$(CONFIG_VIDEO_AK881X)		+= ak881x.o
 obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
+obj-$(CONFIG_VIDEO_I2C_POLLING)	+= i2c-polling.o
 obj-$(CONFIG_VIDEO_ML86V7667)	+= ml86v7667.o
 obj-$(CONFIG_VIDEO_OV2659)	+= ov2659.o
 obj-$(CONFIG_VIDEO_TC358743)	+= tc358743.o
diff --git a/drivers/media/i2c/i2c-polling.c b/drivers/media/i2c/i2c-polling.c
new file mode 100644
index 000000000000..807f3aa84245
--- /dev/null
+++ b/drivers/media/i2c/i2c-polling.c
@@ -0,0 +1,469 @@
+/*
+ * i2c_polling.c - Support for polling I2C video devices
+ *
+ * Copyright (C) 2016 Matt Ranostay <mranostay@ranostay.consulting>
+ *
+ * Based on the orginal work drivers/media/parport/bw-qcam.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Supported:
+ * - Panasonic AMG88xx Grid-Eye Sensors
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <linux/mutex.h>
+#include </inux/slab.h>
+#include <linux/i2c.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/videobuf2-vmalloc.h>
+
+#define I2C_POLLING_DRIVER	"i2c-polling"
+
+struct i2c_polling_chip;
+
+struct i2c_polling_data {
+	struct i2c_client *client;
+	const struct i2c_polling_chip *chip;
+	struct mutex lock;
+	struct mutex queue_lock;
+	unsigned int last_update;
+
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct vb2_queue vb_vidq;
+};
+
+static struct v4l2_fmtdesc amg88xx_format = {
+	.description = "12-bit Greyscale",
+	.pixelformat = V4L2_PIX_FMT_Y12,
+};
+
+static struct v4l2_frmsize_discrete amg88xx_size = {
+	.width = 8,
+	.height = 8,
+};
+
+struct i2c_polling_chip {
+	/* video dimensions */
+	struct v4l2_fmtdesc *format;
+	struct v4l2_frmsize_discrete *size;
+
+	/* max frames per second */
+	unsigned int max_fps;
+
+	/* pixel buffer size */
+	unsigned int buffer_size;
+
+	/* xfer function */
+	int (*xfer)(struct i2c_polling_data *data, char *buf);
+};
+
+enum {
+	AMG88XX	= 0,
+	I2C_POLLING_CHIP_CNT,
+};
+
+static int amg88xx_xfer(struct i2c_polling_data *data, char *buf)
+{
+	struct i2c_client *client = data->client;
+	struct i2c_msg msg[2];
+	u8 reg = 0x80;
+	int ret;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf  = (char *) &reg;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = data->chip->buffer_size;
+	msg[1].buf = (char *) buf;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+
+	return (ret == 2) ? 0 : -EIO;
+}
+
+static const struct i2c_polling_chip i2c_polling_chips[I2C_POLLING_CHIP_CNT] = {
+	[AMG88XX] = {
+		.size		= &amg88xx_size,
+		.format		= &amg88xx_format,
+		.max_fps	= 10,
+		.buffer_size	= 128,
+		.xfer		= &amg88xx_xfer,
+	},
+};
+
+static const struct v4l2_file_operations i2c_polling_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= vb2_fop_release,
+	.poll		= vb2_fop_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.read		= vb2_fop_read,
+	.mmap		= vb2_fop_mmap,
+};
+
+static int queue_setup(struct vb2_queue *vq,
+		       unsigned int *nbuffers, unsigned int *nplanes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct i2c_polling_data *data = vb2_get_drv_priv(vq);
+
+	if (!(*nbuffers))
+		*nbuffers = 3;
+
+	*nplanes = 1;
+	sizes[0] = data->chip->buffer_size;
+
+	return 0;
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct i2c_polling_data *data = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned int delay = 1000 / data->chip->max_fps;
+	int delta;
+
+	mutex_lock(&data->lock);
+
+	delta = jiffies - data->last_update;
+
+	if (delta < msecs_to_jiffies(delay)) {
+		int tmp = (delay - jiffies_to_msecs(delta)) * 1000;
+
+		usleep_range(tmp, tmp + 1000);
+	}
+	data->last_update = jiffies;
+
+	mutex_unlock(&data->lock);
+
+	vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct i2c_polling_data *data = vb2_get_drv_priv(vb->vb2_queue);
+	void *vbuf = vb2_plane_vaddr(vb, 0);
+	int size = vb2_plane_size(vb, 0);
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	ret = data->chip->xfer(data, vbuf);
+	if (ret < 0)
+		vb->state = VB2_BUF_STATE_ERROR;
+
+	mutex_unlock(&data->lock);
+
+	vb->timestamp = ktime_get_ns();
+	vb2_set_plane_payload(vb, 0, ret ? 0 : size);
+}
+
+static struct vb2_ops i2c_polling_video_qops = {
+	.queue_setup	= queue_setup,
+	.buf_queue	= buffer_queue,
+	.buf_finish	= buffer_finish,
+	.wait_prepare	= vb2_ops_wait_prepare,
+	.wait_finish	= vb2_ops_wait_finish,
+};
+
+static int i2c_polling_querycap(struct file *file, void  *priv,
+				struct v4l2_capability *vcap)
+{
+	struct i2c_polling_data *data = video_drvdata(file);
+
+	strlcpy(vcap->driver, data->v4l2_dev.name, sizeof(vcap->driver));
+	strlcpy(vcap->card, "I2C Polling Video", sizeof(vcap->card));
+
+	strlcpy(vcap->bus_info, "I2C:i2c-polling", sizeof(vcap->bus_info));
+	vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
+			    V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+	vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+	return 0;
+}
+
+static int i2c_polling_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+	*inp = 0;
+
+	return 0;
+}
+
+static int i2c_polling_s_input(struct file *file, void *fh, unsigned int inp)
+{
+	return (inp > 0) ? -EINVAL : 0;
+}
+
+static int i2c_polling_enum_input(struct file *file, void *fh,
+				  struct v4l2_input *vin)
+{
+	if (vin->index > 0)
+		return -EINVAL;
+
+	strlcpy(vin->name, "Camera", sizeof(vin->name));
+
+	vin->type = V4L2_INPUT_TYPE_CAMERA;
+	vin->audioset = 0;
+	vin->tuner = 0;
+	vin->std = 0;
+	vin->status = 0;
+
+	return 0;
+}
+
+static int i2c_polling_enum_fmt_vid_cap(struct file *file, void *fh,
+					struct v4l2_fmtdesc *fmt)
+{
+	struct i2c_polling_data *data = video_drvdata(file);
+	enum v4l2_buf_type type = fmt->type;
+
+	if (fmt->index > 0)
+		return -EINVAL;
+
+	*fmt = *data->chip->format;
+	fmt->type = type;
+
+	return 0;
+}
+
+static int i2c_polling_enum_framesizes(struct file *file, void *fh,
+				       struct v4l2_frmsizeenum *fsize)
+{
+	struct i2c_polling_data *data = video_drvdata(file);
+	struct v4l2_frmsize_discrete *size = data->chip->size;
+
+	/* currently only one frame size is allowed */
+	if (fsize->index > 0)
+		return -EINVAL;
+
+	if (fsize->pixel_format != data->chip->format->pixelformat)
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+	fsize->discrete.width = size->width;
+	fsize->discrete.height = size->height;
+
+	return 0;
+}
+
+static int i2c_polling_enum_frameintervals(struct file *file, void *priv,
+					   struct v4l2_frmivalenum *fe)
+{
+	struct i2c_polling_data *data = video_drvdata(file);
+	struct v4l2_frmsize_discrete *size = data->chip->size;
+
+	if (fe->index > 0)
+		return -EINVAL;
+
+	if ((fe->width != size->width) || (fe->height != size->height))
+		return -EINVAL;
+
+	fe->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+	fe->discrete.numerator = 1;
+	fe->discrete.denominator = data->chip->max_fps;
+
+	return 0;
+}
+
+static int i2c_polling_try_fmt_vid_cap(struct file *file, void *fh,
+				       struct v4l2_format *fmt)
+{
+	struct i2c_polling_data *data = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	struct v4l2_frmsize_discrete *size = data->chip->size;
+
+	pix->width = size->width;
+	pix->height = size->height;
+	pix->pixelformat = data->chip->format->pixelformat;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = pix->width * 2;
+	pix->sizeimage = pix->width * pix->height * 2;
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	pix->priv = 0;
+
+	return 0;
+}
+
+static int i2c_polling_fmt_vid_cap(struct file *file, void *fh,
+				     struct v4l2_format *fmt)
+{
+	struct i2c_polling_data *data = video_drvdata(file);
+	int ret = i2c_polling_try_fmt_vid_cap(file, fh, fmt);
+
+	if (ret < 0)
+		return ret;
+
+	if (vb2_is_busy(&data->vb_vidq))
+		return -EBUSY;
+
+	return 0;
+}
+
+static int i2c_polling_g_parm(struct file *filp, void *priv,
+			      struct v4l2_streamparm *parm)
+{
+	struct i2c_polling_data *data = video_drvdata(filp);
+
+	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	parm->parm.capture.readbuffers = 3;
+	parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
+	parm->parm.capture.timeperframe.numerator = 1;
+	parm->parm.capture.timeperframe.denominator = data->chip->max_fps;
+
+	return 0;
+}
+
+static int i2c_polling_s_parm(struct file *filp, void *priv,
+			      struct v4l2_streamparm *parm)
+{
+	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return i2c_polling_g_parm(filp, priv, parm);
+}
+
+static const struct v4l2_ioctl_ops i2c_polling_ioctl_ops = {
+	.vidioc_querycap		= i2c_polling_querycap,
+	.vidioc_g_input			= i2c_polling_g_input,
+	.vidioc_s_input			= i2c_polling_s_input,
+	.vidioc_enum_input		= i2c_polling_enum_input,
+	.vidioc_enum_fmt_vid_cap	= i2c_polling_enum_fmt_vid_cap,
+	.vidioc_enum_framesizes		= i2c_polling_enum_framesizes,
+	.vidioc_enum_frameintervals	= i2c_polling_enum_frameintervals,
+	.vidioc_g_fmt_vid_cap		= i2c_polling_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap		= i2c_polling_fmt_vid_cap,
+	.vidioc_g_parm			= i2c_polling_g_parm,
+	.vidioc_s_parm			= i2c_polling_s_parm,
+	.vidioc_try_fmt_vid_cap		= i2c_polling_try_fmt_vid_cap,
+	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
+	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
+	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
+	.vidioc_querybuf		= vb2_ioctl_querybuf,
+	.vidioc_qbuf			= vb2_ioctl_qbuf,
+	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
+	.vidioc_streamon		= vb2_ioctl_streamon,
+	.vidioc_streamoff		= vb2_ioctl_streamoff,
+	.vidioc_log_status		= v4l2_ctrl_log_status,
+	.vidioc_subscribe_event		= v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
+};
+
+static int i2c_polling_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct i2c_polling_data *data;
+	struct v4l2_device *v4l2_dev;
+	struct vb2_queue *queue;
+	int ret;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->chip = &i2c_polling_chips[id->driver_data];
+	data->client = client;
+	data->last_update = jiffies;
+	v4l2_dev = &data->v4l2_dev;
+	strlcpy(v4l2_dev->name, I2C_POLLING_DRIVER, sizeof(v4l2_dev->name));
+
+	ret = v4l2_device_register(&client->dev, v4l2_dev);
+	if (ret < 0)
+		goto error_free_device;
+
+	mutex_init(&data->lock);
+	mutex_init(&data->queue_lock);
+
+	queue = &data->vb_vidq;
+	queue->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	queue->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
+	queue->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	queue->drv_priv = data;
+	queue->ops = &i2c_polling_video_qops;
+	queue->mem_ops = &vb2_vmalloc_memops;
+
+	ret = vb2_queue_init(queue);
+	if (ret < 0)
+		goto error_free_device;
+
+	data->vdev.queue = queue;
+	data->vdev.queue->lock = &data->queue_lock;
+
+	strlcpy(data->vdev.name, "I2C Polling Video", sizeof(data->vdev.name));
+
+	data->vdev.v4l2_dev = v4l2_dev;
+	data->vdev.fops = &i2c_polling_fops;
+	data->vdev.lock = &data->lock;
+	data->vdev.ioctl_ops = &i2c_polling_ioctl_ops;
+	data->vdev.release = video_device_release_empty;
+
+	video_set_drvdata(&data->vdev, data);
+	i2c_set_clientdata(client, data);
+
+	ret = video_register_device(&data->vdev, VFL_TYPE_GRABBER, -1);
+	if (ret < 0)
+		goto error_unregister_device;
+
+	return 0;
+
+error_unregister_device:
+	v4l2_device_unregister(v4l2_dev);
+
+error_free_device:
+	kfree(data);
+
+	return ret;
+}
+
+static int i2c_polling_remove(struct i2c_client *client)
+{
+	struct i2c_polling_data *data = i2c_get_clientdata(client);
+
+	v4l2_device_unregister(&data->v4l2_dev);
+	video_unregister_device(&data->vdev);
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id i2c_polling_id_table[] = {
+	{ "amg88xx", AMG88XX },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, i2c_polling_id_table);
+
+static struct i2c_driver i2c_polling_driver = {
+	.driver = {
+		.name	= I2C_POLLING_DRIVER,
+	},
+	.probe		= i2c_polling_probe,
+	.remove		= i2c_polling_remove,
+	.id_table	= i2c_polling_id_table,
+};
+
+module_i2c_driver(i2c_polling_driver);
+
+MODULE_AUTHOR("Matt Ranostay <mranostay@ranostay.consulting>");
+MODULE_DESCRIPTION("I2C polling video support");
+MODULE_LICENSE("GPL");
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] media: i2c-polling: add i2c-polling driver
  2016-11-08  6:00 [PATCH v2] media: i2c-polling: add i2c-polling driver Matt Ranostay
@ 2016-11-08  6:51 ` kbuild test robot
       [not found] ` <CANgUfueAGBgM3MtzH1qvgaPFM9JsCSCsy2J0tmjGkT_krrpzaQ@mail.gmail.com>
  1 sibling, 0 replies; 3+ messages in thread
From: kbuild test robot @ 2016-11-08  6:51 UTC (permalink / raw)
  To: Matt Ranostay
  Cc: kbuild-all, linux-kernel, linux-media, Matt Ranostay,
	Attila Kinali, Marek Vasut, Luca Barbato

[-- Attachment #1: Type: text/plain, Size: 1291 bytes --]

Hi Matt,

[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on v4.9-rc4 next-20161028]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Matt-Ranostay/media-i2c-polling-add-i2c-polling-driver/20161108-140530
base:   git://linuxtv.org/media_tree.git master
config: i386-allmodconfig (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

>> drivers/media/i2c/i2c-polling.c:27:24: fatal error: /inux/slab.h: No such file or directory
    #include </inux/slab.h>
                           ^
   compilation terminated.

vim +27 drivers/media/i2c/i2c-polling.c

    21	
    22	#include <linux/module.h>
    23	#include <linux/of.h>
    24	#include <linux/delay.h>
    25	#include <linux/videodev2.h>
    26	#include <linux/mutex.h>
  > 27	#include </inux/slab.h>
    28	#include <linux/i2c.h>
    29	#include <media/v4l2-common.h>
    30	#include <media/v4l2-ioctl.h>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 56866 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] media: i2c-polling: add i2c-polling driver
       [not found] ` <CANgUfueAGBgM3MtzH1qvgaPFM9JsCSCsy2J0tmjGkT_krrpzaQ@mail.gmail.com>
@ 2016-11-08 16:11   ` Matt Ranostay
  0 siblings, 0 replies; 3+ messages in thread
From: Matt Ranostay @ 2016-11-08 16:11 UTC (permalink / raw)
  To: Ozgur
  Cc: Linux Kernel, Linux Media Mailing List, Attila Kinali,
	Marek Vasut, Luca Barbato

On Mon, Nov 7, 2016 at 11:03 PM, Ozgur <okaratas@member.fsf.org> wrote:
> Dear Matt;
>
> I think the "inux/slab.h" line is incorrect and I fixed to "linux/slab.h", I
> tested. Success now.
>
> Regards,
>
> ~ Ozgur
>
>>> -#include </inux/slab.h>
>>> +#include </linux/slab.h>

Gah wondering how it built for me. will fix in v3


>
>
> 2016-11-08 9:00 GMT+03:00 Matt Ranostay <matt@ranostay.consulting>:
>>
>> There are several thermal sensors that only have a low-speed bus
>> interface but output valid video data. This patchset enables support
>> for the AMG88xx "Grid-Eye" sensor family.
>>
>> Cc: Attila Kinali <attila@kinali.ch>
>> Cc: Marek Vasut <marex@denx.de>
>> Cc: Luca Barbato <lu_zero@gentoo.org>
>> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
>> ---
>> Changes from v1:
>> * correct i2c_polling_remove() operations
>> * fixed delay calcuation in buffer_queue()
>> * add include linux/slab.h
>>
>>  drivers/media/i2c/Kconfig       |   8 +
>>  drivers/media/i2c/Makefile      |   1 +
>>  drivers/media/i2c/i2c-polling.c | 469
>> ++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 478 insertions(+)
>>  create mode 100644 drivers/media/i2c/i2c-polling.c
>>
>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
>> index 2669b4bad910..6346eeecfaae 100644
>> --- a/drivers/media/i2c/Kconfig
>> +++ b/drivers/media/i2c/Kconfig
>> @@ -768,6 +768,14 @@ config VIDEO_M52790
>>
>>          To compile this driver as a module, choose M here: the
>>          module will be called m52790.
>> +
>> +config VIDEO_I2C_POLLING
>> +       tristate "I2C polling video support"
>> +       depends on VIDEO_V4L2 && I2C
>> +       select VIDEOBUF2_VMALLOC
>> +       ---help---
>> +         Enable the I2C polling video support which supports the
>> following:
>> +          * Panasonic AMG88xx Grid-Eye Sensors
>>  endmenu
>>
>>  menu "Sensors used on soc_camera driver"
>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
>> index 92773b2e6225..8182ec9f66b9 100644
>> --- a/drivers/media/i2c/Makefile
>> +++ b/drivers/media/i2c/Makefile
>> @@ -79,6 +79,7 @@ obj-$(CONFIG_VIDEO_LM3646)    += lm3646.o
>>  obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o
>>  obj-$(CONFIG_VIDEO_AK881X)             += ak881x.o
>>  obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
>> +obj-$(CONFIG_VIDEO_I2C_POLLING)        += i2c-polling.o
>>  obj-$(CONFIG_VIDEO_ML86V7667)  += ml86v7667.o
>>  obj-$(CONFIG_VIDEO_OV2659)     += ov2659.o
>>  obj-$(CONFIG_VIDEO_TC358743)   += tc358743.o
>> diff --git a/drivers/media/i2c/i2c-polling.c
>> b/drivers/media/i2c/i2c-polling.c
>> new file mode 100644
>> index 000000000000..807f3aa84245
>> --- /dev/null
>> +++ b/drivers/media/i2c/i2c-polling.c
>> @@ -0,0 +1,469 @@
>> +/*
>> + * i2c_polling.c - Support for polling I2C video devices
>> + *
>> + * Copyright (C) 2016 Matt Ranostay <mranostay@ranostay.consulting>
>> + *
>> + * Based on the orginal work drivers/media/parport/bw-qcam.c
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Supported:
>> + * - Panasonic AMG88xx Grid-Eye Sensors
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/delay.h>
>> +#include <linux/videodev2.h>
>> +#include <linux/mutex.h>
>> +#include </inux/slab.h>
>> +#include <linux/i2c.h>
>> +#include <media/v4l2-common.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-fh.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-event.h>
>> +#include <media/videobuf2-vmalloc.h>
>> +
>> +#define I2C_POLLING_DRIVER     "i2c-polling"
>> +
>> +struct i2c_polling_chip;
>> +
>> +struct i2c_polling_data {
>> +       struct i2c_client *client;
>> +       const struct i2c_polling_chip *chip;
>> +       struct mutex lock;
>> +       struct mutex queue_lock;
>> +       unsigned int last_update;
>> +
>> +       struct v4l2_device v4l2_dev;
>> +       struct video_device vdev;
>> +       struct vb2_queue vb_vidq;
>> +};
>> +
>> +static struct v4l2_fmtdesc amg88xx_format = {
>> +       .description = "12-bit Greyscale",
>> +       .pixelformat = V4L2_PIX_FMT_Y12,
>> +};
>> +
>> +static struct v4l2_frmsize_discrete amg88xx_size = {
>> +       .width = 8,
>> +       .height = 8,
>> +};
>> +
>> +struct i2c_polling_chip {
>> +       /* video dimensions */
>> +       struct v4l2_fmtdesc *format;
>> +       struct v4l2_frmsize_discrete *size;
>> +
>> +       /* max frames per second */
>> +       unsigned int max_fps;
>> +
>> +       /* pixel buffer size */
>> +       unsigned int buffer_size;
>> +
>> +       /* xfer function */
>> +       int (*xfer)(struct i2c_polling_data *data, char *buf);
>> +};
>> +
>> +enum {
>> +       AMG88XX = 0,
>> +       I2C_POLLING_CHIP_CNT,
>> +};
>> +
>> +static int amg88xx_xfer(struct i2c_polling_data *data, char *buf)
>> +{
>> +       struct i2c_client *client = data->client;
>> +       struct i2c_msg msg[2];
>> +       u8 reg = 0x80;
>> +       int ret;
>> +
>> +       msg[0].addr = client->addr;
>> +       msg[0].flags = 0;
>> +       msg[0].len = 1;
>> +       msg[0].buf  = (char *) &reg;
>> +
>> +       msg[1].addr = client->addr;
>> +       msg[1].flags = I2C_M_RD;
>> +       msg[1].len = data->chip->buffer_size;
>> +       msg[1].buf = (char *) buf;
>> +
>> +       ret = i2c_transfer(client->adapter, msg, 2);
>> +
>> +       return (ret == 2) ? 0 : -EIO;
>> +}
>> +
>> +static const struct i2c_polling_chip
>> i2c_polling_chips[I2C_POLLING_CHIP_CNT] = {
>> +       [AMG88XX] = {
>> +               .size           = &amg88xx_size,
>> +               .format         = &amg88xx_format,
>> +               .max_fps        = 10,
>> +               .buffer_size    = 128,
>> +               .xfer           = &amg88xx_xfer,
>> +       },
>> +};
>> +
>> +static const struct v4l2_file_operations i2c_polling_fops = {
>> +       .owner          = THIS_MODULE,
>> +       .open           = v4l2_fh_open,
>> +       .release        = vb2_fop_release,
>> +       .poll           = vb2_fop_poll,
>> +       .unlocked_ioctl = video_ioctl2,
>> +       .read           = vb2_fop_read,
>> +       .mmap           = vb2_fop_mmap,
>> +};
>> +
>> +static int queue_setup(struct vb2_queue *vq,
>> +                      unsigned int *nbuffers, unsigned int *nplanes,
>> +                      unsigned int sizes[], struct device *alloc_devs[])
>> +{
>> +       struct i2c_polling_data *data = vb2_get_drv_priv(vq);
>> +
>> +       if (!(*nbuffers))
>> +               *nbuffers = 3;
>> +
>> +       *nplanes = 1;
>> +       sizes[0] = data->chip->buffer_size;
>> +
>> +       return 0;
>> +}
>> +
>> +static void buffer_queue(struct vb2_buffer *vb)
>> +{
>> +       struct i2c_polling_data *data = vb2_get_drv_priv(vb->vb2_queue);
>> +       unsigned int delay = 1000 / data->chip->max_fps;
>> +       int delta;
>> +
>> +       mutex_lock(&data->lock);
>> +
>> +       delta = jiffies - data->last_update;
>> +
>> +       if (delta < msecs_to_jiffies(delay)) {
>> +               int tmp = (delay - jiffies_to_msecs(delta)) * 1000;
>> +
>> +               usleep_range(tmp, tmp + 1000);
>> +       }
>> +       data->last_update = jiffies;
>> +
>> +       mutex_unlock(&data->lock);
>> +
>> +       vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
>> +}
>> +
>> +static void buffer_finish(struct vb2_buffer *vb)
>> +{
>> +       struct i2c_polling_data *data = vb2_get_drv_priv(vb->vb2_queue);
>> +       void *vbuf = vb2_plane_vaddr(vb, 0);
>> +       int size = vb2_plane_size(vb, 0);
>> +       int ret;
>> +
>> +       mutex_lock(&data->lock);
>> +
>> +       ret = data->chip->xfer(data, vbuf);
>> +       if (ret < 0)
>> +               vb->state = VB2_BUF_STATE_ERROR;
>> +
>> +       mutex_unlock(&data->lock);
>> +
>> +       vb->timestamp = ktime_get_ns();
>> +       vb2_set_plane_payload(vb, 0, ret ? 0 : size);
>> +}
>> +
>> +static struct vb2_ops i2c_polling_video_qops = {
>> +       .queue_setup    = queue_setup,
>> +       .buf_queue      = buffer_queue,
>> +       .buf_finish     = buffer_finish,
>> +       .wait_prepare   = vb2_ops_wait_prepare,
>> +       .wait_finish    = vb2_ops_wait_finish,
>> +};
>> +
>> +static int i2c_polling_querycap(struct file *file, void  *priv,
>> +                               struct v4l2_capability *vcap)
>> +{
>> +       struct i2c_polling_data *data = video_drvdata(file);
>> +
>> +       strlcpy(vcap->driver, data->v4l2_dev.name, sizeof(vcap->driver));
>> +       strlcpy(vcap->card, "I2C Polling Video", sizeof(vcap->card));
>> +
>> +       strlcpy(vcap->bus_info, "I2C:i2c-polling",
>> sizeof(vcap->bus_info));
>> +       vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
>> +                           V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
>> +       vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_g_input(struct file *file, void *fh, unsigned int
>> *inp)
>> +{
>> +       *inp = 0;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_s_input(struct file *file, void *fh, unsigned int
>> inp)
>> +{
>> +       return (inp > 0) ? -EINVAL : 0;
>> +}
>> +
>> +static int i2c_polling_enum_input(struct file *file, void *fh,
>> +                                 struct v4l2_input *vin)
>> +{
>> +       if (vin->index > 0)
>> +               return -EINVAL;
>> +
>> +       strlcpy(vin->name, "Camera", sizeof(vin->name));
>> +
>> +       vin->type = V4L2_INPUT_TYPE_CAMERA;
>> +       vin->audioset = 0;
>> +       vin->tuner = 0;
>> +       vin->std = 0;
>> +       vin->status = 0;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_enum_fmt_vid_cap(struct file *file, void *fh,
>> +                                       struct v4l2_fmtdesc *fmt)
>> +{
>> +       struct i2c_polling_data *data = video_drvdata(file);
>> +       enum v4l2_buf_type type = fmt->type;
>> +
>> +       if (fmt->index > 0)
>> +               return -EINVAL;
>> +
>> +       *fmt = *data->chip->format;
>> +       fmt->type = type;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_enum_framesizes(struct file *file, void *fh,
>> +                                      struct v4l2_frmsizeenum *fsize)
>> +{
>> +       struct i2c_polling_data *data = video_drvdata(file);
>> +       struct v4l2_frmsize_discrete *size = data->chip->size;
>> +
>> +       /* currently only one frame size is allowed */
>> +       if (fsize->index > 0)
>> +               return -EINVAL;
>> +
>> +       if (fsize->pixel_format != data->chip->format->pixelformat)
>> +               return -EINVAL;
>> +
>> +       fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
>> +       fsize->discrete.width = size->width;
>> +       fsize->discrete.height = size->height;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_enum_frameintervals(struct file *file, void *priv,
>> +                                          struct v4l2_frmivalenum *fe)
>> +{
>> +       struct i2c_polling_data *data = video_drvdata(file);
>> +       struct v4l2_frmsize_discrete *size = data->chip->size;
>> +
>> +       if (fe->index > 0)
>> +               return -EINVAL;
>> +
>> +       if ((fe->width != size->width) || (fe->height != size->height))
>> +               return -EINVAL;
>> +
>> +       fe->type = V4L2_FRMIVAL_TYPE_DISCRETE;
>> +       fe->discrete.numerator = 1;
>> +       fe->discrete.denominator = data->chip->max_fps;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_try_fmt_vid_cap(struct file *file, void *fh,
>> +                                      struct v4l2_format *fmt)
>> +{
>> +       struct i2c_polling_data *data = video_drvdata(file);
>> +       struct v4l2_pix_format *pix = &fmt->fmt.pix;
>> +       struct v4l2_frmsize_discrete *size = data->chip->size;
>> +
>> +       pix->width = size->width;
>> +       pix->height = size->height;
>> +       pix->pixelformat = data->chip->format->pixelformat;
>> +       pix->field = V4L2_FIELD_NONE;
>> +       pix->bytesperline = pix->width * 2;
>> +       pix->sizeimage = pix->width * pix->height * 2;
>> +       pix->colorspace = V4L2_COLORSPACE_SRGB;
>> +       pix->priv = 0;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_fmt_vid_cap(struct file *file, void *fh,
>> +                                    struct v4l2_format *fmt)
>> +{
>> +       struct i2c_polling_data *data = video_drvdata(file);
>> +       int ret = i2c_polling_try_fmt_vid_cap(file, fh, fmt);
>> +
>> +       if (ret < 0)
>> +               return ret;
>> +
>> +       if (vb2_is_busy(&data->vb_vidq))
>> +               return -EBUSY;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_g_parm(struct file *filp, void *priv,
>> +                             struct v4l2_streamparm *parm)
>> +{
>> +       struct i2c_polling_data *data = video_drvdata(filp);
>> +
>> +       if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> +               return -EINVAL;
>> +
>> +       parm->parm.capture.readbuffers = 3;
>> +       parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>> +       parm->parm.capture.timeperframe.numerator = 1;
>> +       parm->parm.capture.timeperframe.denominator = data->chip->max_fps;
>> +
>> +       return 0;
>> +}
>> +
>> +static int i2c_polling_s_parm(struct file *filp, void *priv,
>> +                             struct v4l2_streamparm *parm)
>> +{
>> +       if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> +               return -EINVAL;
>> +
>> +       return i2c_polling_g_parm(filp, priv, parm);
>> +}
>> +
>> +static const struct v4l2_ioctl_ops i2c_polling_ioctl_ops = {
>> +       .vidioc_querycap                = i2c_polling_querycap,
>> +       .vidioc_g_input                 = i2c_polling_g_input,
>> +       .vidioc_s_input                 = i2c_polling_s_input,
>> +       .vidioc_enum_input              = i2c_polling_enum_input,
>> +       .vidioc_enum_fmt_vid_cap        = i2c_polling_enum_fmt_vid_cap,
>> +       .vidioc_enum_framesizes         = i2c_polling_enum_framesizes,
>> +       .vidioc_enum_frameintervals     = i2c_polling_enum_frameintervals,
>> +       .vidioc_g_fmt_vid_cap           = i2c_polling_fmt_vid_cap,
>> +       .vidioc_s_fmt_vid_cap           = i2c_polling_fmt_vid_cap,
>> +       .vidioc_g_parm                  = i2c_polling_g_parm,
>> +       .vidioc_s_parm                  = i2c_polling_s_parm,
>> +       .vidioc_try_fmt_vid_cap         = i2c_polling_try_fmt_vid_cap,
>> +       .vidioc_reqbufs                 = vb2_ioctl_reqbufs,
>> +       .vidioc_create_bufs             = vb2_ioctl_create_bufs,
>> +       .vidioc_prepare_buf             = vb2_ioctl_prepare_buf,
>> +       .vidioc_querybuf                = vb2_ioctl_querybuf,
>> +       .vidioc_qbuf                    = vb2_ioctl_qbuf,
>> +       .vidioc_dqbuf                   = vb2_ioctl_dqbuf,
>> +       .vidioc_streamon                = vb2_ioctl_streamon,
>> +       .vidioc_streamoff               = vb2_ioctl_streamoff,
>> +       .vidioc_log_status              = v4l2_ctrl_log_status,
>> +       .vidioc_subscribe_event         = v4l2_ctrl_subscribe_event,
>> +       .vidioc_unsubscribe_event       = v4l2_event_unsubscribe,
>> +};
>> +
>> +static int i2c_polling_probe(struct i2c_client *client,
>> +                            const struct i2c_device_id *id)
>> +{
>> +       struct i2c_polling_data *data;
>> +       struct v4l2_device *v4l2_dev;
>> +       struct vb2_queue *queue;
>> +       int ret;
>> +
>> +       data = kzalloc(sizeof(*data), GFP_KERNEL);
>> +       if (!data)
>> +               return -ENOMEM;
>> +
>> +       data->chip = &i2c_polling_chips[id->driver_data];
>> +       data->client = client;
>> +       data->last_update = jiffies;
>> +       v4l2_dev = &data->v4l2_dev;
>> +       strlcpy(v4l2_dev->name, I2C_POLLING_DRIVER,
>> sizeof(v4l2_dev->name));
>> +
>> +       ret = v4l2_device_register(&client->dev, v4l2_dev);
>> +       if (ret < 0)
>> +               goto error_free_device;
>> +
>> +       mutex_init(&data->lock);
>> +       mutex_init(&data->queue_lock);
>> +
>> +       queue = &data->vb_vidq;
>> +       queue->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> +       queue->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
>> +       queue->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
>> +       queue->drv_priv = data;
>> +       queue->ops = &i2c_polling_video_qops;
>> +       queue->mem_ops = &vb2_vmalloc_memops;
>> +
>> +       ret = vb2_queue_init(queue);
>> +       if (ret < 0)
>> +               goto error_free_device;
>> +
>> +       data->vdev.queue = queue;
>> +       data->vdev.queue->lock = &data->queue_lock;
>> +
>> +       strlcpy(data->vdev.name, "I2C Polling Video",
>> sizeof(data->vdev.name));
>> +
>> +       data->vdev.v4l2_dev = v4l2_dev;
>> +       data->vdev.fops = &i2c_polling_fops;
>> +       data->vdev.lock = &data->lock;
>> +       data->vdev.ioctl_ops = &i2c_polling_ioctl_ops;
>> +       data->vdev.release = video_device_release_empty;
>> +
>> +       video_set_drvdata(&data->vdev, data);
>> +       i2c_set_clientdata(client, data);
>> +
>> +       ret = video_register_device(&data->vdev, VFL_TYPE_GRABBER, -1);
>> +       if (ret < 0)
>> +               goto error_unregister_device;
>> +
>> +       return 0;
>> +
>> +error_unregister_device:
>> +       v4l2_device_unregister(v4l2_dev);
>> +
>> +error_free_device:
>> +       kfree(data);
>> +
>> +       return ret;
>> +}
>> +
>> +static int i2c_polling_remove(struct i2c_client *client)
>> +{
>> +       struct i2c_polling_data *data = i2c_get_clientdata(client);
>> +
>> +       v4l2_device_unregister(&data->v4l2_dev);
>> +       video_unregister_device(&data->vdev);
>> +       kfree(data);
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct i2c_device_id i2c_polling_id_table[] = {
>> +       { "amg88xx", AMG88XX },
>> +       {}
>> +};
>> +MODULE_DEVICE_TABLE(i2c, i2c_polling_id_table);
>> +
>> +static struct i2c_driver i2c_polling_driver = {
>> +       .driver = {
>> +               .name   = I2C_POLLING_DRIVER,
>> +       },
>> +       .probe          = i2c_polling_probe,
>> +       .remove         = i2c_polling_remove,
>> +       .id_table       = i2c_polling_id_table,
>> +};
>> +
>> +module_i2c_driver(i2c_polling_driver);
>> +
>> +MODULE_AUTHOR("Matt Ranostay <mranostay@ranostay.consulting>");
>> +MODULE_DESCRIPTION("I2C polling video support");
>> +MODULE_LICENSE("GPL");

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2016-11-08 16:12 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-08  6:00 [PATCH v2] media: i2c-polling: add i2c-polling driver Matt Ranostay
2016-11-08  6:51 ` kbuild test robot
     [not found] ` <CANgUfueAGBgM3MtzH1qvgaPFM9JsCSCsy2J0tmjGkT_krrpzaQ@mail.gmail.com>
2016-11-08 16:11   ` Matt Ranostay

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).