[GIT PULL 0/3] ARM: exynos: Stuff for v4.10

[GIT PULL 0/3] ARM: exynos: Stuff for v4.10

[Krzysztof Kozlowski]

Hi,

Two weeks ago it looked it will be very boring merge window for Samsung,
but luckily it is not!

So far we got Exynos5433 and two boards on it. ARMv7 got one board
using Exynos4412.

I am pushing this patches early but expect another pull requests in few weeks.

No order of pulling, no dependencies.


Best regards,
Krzysztof

[GIT PULL 3/3] ARM: defconfig: Samsung defconfigs for v4.10

[Krzysztof Kozlowski]

Hi,

Nothing special.

Best regards,
Krzysztof


The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-defconfig-4.10

for you to fetch changes up to e471e9b4b13b59ee8cb7079018472c4dda46cb7a:

  ARM: multi_v7_defconfig: Enable exynos-gsc driver as module (2016-10-17 19:43:29 +0300)

----------------------------------------------------------------
Samsung defconfig update for v4.10:
1. Enable the Exynos gscaler driver on multi_v7 and exynos defconfigs.

----------------------------------------------------------------
Javier Martinez Canillas (2):
      ARM: exynos_defconfig: Enable exynos-gsc driver as module
      ARM: multi_v7_defconfig: Enable exynos-gsc driver as module

 arch/arm/configs/exynos_defconfig   | 1 +
 arch/arm/configs/multi_v7_defconfig | 1 +
 2 files changed, 2 insertions(+)

[GIT PULL 1/3] ARM: dts: exynos: DT for v4.10

[Krzysztof Kozlowski]

Hi,

Hurray! New board! ... Exynos4415 slowly is going away.

Best regards,
Krzysztof


The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-4.10

for you to fetch changes up to 05a3589f46f913fbe91704f12fdca46a0eb0a27b:

  ARM: dts: exynos: Add SCU device node to exynos4.dtsi (2016-11-05 17:39:50 +0200)

----------------------------------------------------------------
Samsung DeviceTree update for v4.10:
1. Add TOPEET itop core and Elite boards, based on Exynos4412.
2. Remove the Exynos4415 DTSI. We did not have any mainlined boards
   using it. I am also not aware of any popular out-of-tree boards using it.
3. Add Snoop Control Unit node for Exynos4.
4. Minor cleanups.

----------------------------------------------------------------
Javier Martinez Canillas (1):
      ARM: dts: exynos: Document eMMC/SD/SDIO devices in Snow and Peach boards

Krzysztof Kozlowski (1):
      ARM: dts: exynos: Remove exynos4415.dtsi

Pankaj Dubey (1):
      ARM: dts: exynos: Add SCU device node to exynos4.dtsi

Randy Li (2):
      ARM: dts: exynos: Add TOPEET itop core board SCP package version
      ARM: dts: exynos: Add TOPEET itop elite based board

Sylwester Nawrocki (2):
      ARM: dts: exynos: Remove "simple-bus" compatible from fimc-is node
      ARM: dts: exynos: Add entries for sound support on Odroid-XU board

 .../bindings/arm/samsung/samsung-boards.txt        |   3 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/exynos4.dtsi                     |   5 +
 arch/arm/boot/dts/exynos4412-itop-elite.dts        | 240 ++++++++
 arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi    | 501 ++++++++++++++++
 arch/arm/boot/dts/exynos4415-pinctrl.dtsi          | 575 ------------------
 arch/arm/boot/dts/exynos4415.dtsi                  | 650 ---------------------
 arch/arm/boot/dts/exynos4x12.dtsi                  |   2 +-
 arch/arm/boot/dts/exynos5250-snow-common.dtsi      |   4 +
 arch/arm/boot/dts/exynos5410-odroidxu.dts          |  69 +++
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi          |   9 +
 arch/arm/boot/dts/exynos5410.dtsi                  |  59 ++
 arch/arm/boot/dts/exynos5420-peach-pit.dts         |   3 +
 arch/arm/boot/dts/exynos5800-peach-pi.dts          |   3 +
 14 files changed, 898 insertions(+), 1226 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts
 create mode 100644 arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
 delete mode 100644 arch/arm/boot/dts/exynos4415-pinctrl.dtsi
 delete mode 100644 arch/arm/boot/dts/exynos4415.dtsi

[GIT PULL 2/3] ARM64: dts: exynos: DT for v4.10

[Krzysztof Kozlowski]

Hi,

Exynos5433 + two boards using it. Mobile boards! :)

I am really happy to push it. I know that it has been a lot of effort
in Samsung to mainline this.

Best regards,
Krzysztof


The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:

  Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-4.10

for you to fetch changes up to 8ac46fc57df82efbc19194dddd335b6c7a960c31:

  arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board (2016-11-03 22:19:57 +0200)

----------------------------------------------------------------
Finally, I am really pleased to announce adding support for Exynos5433 ARMv8
SoC along with two boards.  A lot of Samsung people contributed into this
but the final work and commits were done by Chanwoo Choi.

This means that for v4.10 we got:
1. Exynos5433 DTSI.
2. Two boards: TM2 and TM2E.  These are (almost fully) working mobile phones.

----------------------------------------------------------------
Chanwoo Choi (3):
      arm64: dts: exynos: Add dtsi files for Samsung Exynos5433 64bit SoC
      arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
      arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board

 .../bindings/arm/samsung/samsung-boards.txt        |    2 +
 arch/arm64/boot/dts/exynos/Makefile                |    5 +-
 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi |  794 ++++++++++++
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts      |  974 ++++++++++++++
 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts     |   41 +
 .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi |   23 +
 .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |   22 +
 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     |  296 +++++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 1356 ++++++++++++++++++++
 9 files changed, 3512 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi

Re: [GIT PULL 3/3] ARM: defconfig: Samsung defconfigs for v4.10

[Olof Johansson]

On Tue, Nov 08, 2016 at 08:26:27PM +0200, Krzysztof Kozlowski wrote:
> Hi,
> 
> Nothing special.
> 
> Best regards,
> Krzysztof
> 
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-defconfig-4.10
> 
> for you to fetch changes up to e471e9b4b13b59ee8cb7079018472c4dda46cb7a:
> 
>   ARM: multi_v7_defconfig: Enable exynos-gsc driver as module (2016-10-17 19:43:29 +0300)
> 
> ----------------------------------------------------------------
> Samsung defconfig update for v4.10:
> 1. Enable the Exynos gscaler driver on multi_v7 and exynos defconfigs.

Merged, thanks.


-Olof

Re: [GIT PULL 1/3] ARM: dts: exynos: DT for v4.10

[Olof Johansson]

Hi,

On Tue, Nov 08, 2016 at 08:26:28PM +0200, Krzysztof Kozlowski wrote:
> Hi,
> 
> Hurray! New board! ... Exynos4415 slowly is going away.
> 
> Best regards,
> Krzysztof
> 
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-4.10
> 
> for you to fetch changes up to 05a3589f46f913fbe91704f12fdca46a0eb0a27b:
> 
>   ARM: dts: exynos: Add SCU device node to exynos4.dtsi (2016-11-05 17:39:50 +0200)
> 
> ----------------------------------------------------------------
> Samsung DeviceTree update for v4.10:
> 1. Add TOPEET itop core and Elite boards, based on Exynos4412.
> 2. Remove the Exynos4415 DTSI. We did not have any mainlined boards
>    using it. I am also not aware of any popular out-of-tree boards using it.
> 3. Add Snoop Control Unit node for Exynos4.
> 4. Minor cleanups.

Merged, thanks.


-Olof

Re: [GIT PULL 2/3] ARM64: dts: exynos: DT for v4.10

[Olof Johansson]

On Tue, Nov 08, 2016 at 08:26:29PM +0200, Krzysztof Kozlowski wrote:
> Hi,
> 
> Exynos5433 + two boards using it. Mobile boards! :)
> 
> I am really happy to push it. I know that it has been a lot of effort
> in Samsung to mainline this.
> 
> Best regards,
> Krzysztof
> 
> 
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> 
>   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-4.10
> 
> for you to fetch changes up to 8ac46fc57df82efbc19194dddd335b6c7a960c31:
> 
>   arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board (2016-11-03 22:19:57 +0200)
> 
> ----------------------------------------------------------------
> Finally, I am really pleased to announce adding support for Exynos5433 ARMv8
> SoC along with two boards.  A lot of Samsung people contributed into this
> but the final work and commits were done by Chanwoo Choi.
> 
> This means that for v4.10 we got:
> 1. Exynos5433 DTSI.
> 2. Two boards: TM2 and TM2E.  These are (almost fully) working mobile phones.

Awesome! Looks like TM2 is a Tizen reference board? Great to see the support,
even if it's taken a while.


-Olof

Re: [GIT PULL 2/3] ARM64: dts: exynos: DT for v4.10

[Krzysztof Kozlowski]

On Thu, Nov 17, 2016 at 05:59:54PM -0800, Olof Johansson wrote:
> On Tue, Nov 08, 2016 at 08:26:29PM +0200, Krzysztof Kozlowski wrote:
> > Hi,
> > 
> > Exynos5433 + two boards using it. Mobile boards! :)
> > 
> > I am really happy to push it. I know that it has been a lot of effort
> > in Samsung to mainline this.
> > 
> > Best regards,
> > Krzysztof
> > 
> > 
> > The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
> > 
> >   Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-4.10
> > 
> > for you to fetch changes up to 8ac46fc57df82efbc19194dddd335b6c7a960c31:
> > 
> >   arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board (2016-11-03 22:19:57 +0200)
> > 
> > ----------------------------------------------------------------
> > Finally, I am really pleased to announce adding support for Exynos5433 ARMv8
> > SoC along with two boards.  A lot of Samsung people contributed into this
> > but the final work and commits were done by Chanwoo Choi.
> > 
> > This means that for v4.10 we got:
> > 1. Exynos5433 DTSI.
> > 2. Two boards: TM2 and TM2E.  These are (almost fully) working mobile phones.
> 
> Awesome! Looks like TM2 is a Tizen reference board? Great to see the support,
> even if it's taken a while.

Yes, I think these were planned to be reference devices. Userspace
packages and snapshots are published for some quite long time
(http://download.tizen.org/snapshots/tizen/3.0-mobile/latest/images/arm64-wayland/).

Best regards,
Krzysztof