From: Brian Masney <masneyb@onstation.org>
To: jic23@kernel.org, linux-iio@vger.kernel.org
Cc: devel@driverdev.osuosl.org, gregkh@linuxfoundation.org,
lars@metafoo.de, pmeerw@pmeerw.net, knaack.h@gmx.de,
linux-kernel@vger.kernel.org, Jon.Brenner@ams.com
Subject: [PATCH v3 07/28] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()
Date: Thu, 10 Nov 2016 04:25:43 -0500 [thread overview]
Message-ID: <1478769964-7065-8-git-send-email-masneyb@onstation.org> (raw)
In-Reply-To: <1478769964-7065-1-git-send-email-masneyb@onstation.org>
taos_probe() calls i2c_smbus_write_byte() to select the control
register, however there are no subsequent calls to
i2c_smbus_read_byte(). The write call is unnecessary and is removed by
this patch.
Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@onstation.org>
---
drivers/staging/iio/light/tsl2583.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index 5a32102..449506b 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -788,14 +788,6 @@ static int taos_probe(struct i2c_client *clientp,
return -EINVAL;
}
- ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL));
- if (ret < 0) {
- dev_err(&clientp->dev,
- "i2c_smbus_write_byte() to cmd reg failed in taos_probe(), err = %d\n",
- ret);
- return ret;
- }
-
indio_dev->info = &tsl2583_info;
indio_dev->channels = tsl2583_channels;
indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels);
--
2.7.4
next prev parent reply other threads:[~2016-11-10 9:33 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-10 9:25 [PATCH v3 00/28] staging: iio: tsl2583: move out of staging Brian Masney
2016-11-10 9:25 ` [PATCH v3 01/28] staging: iio: tsl2583: split out functionality of taos_chip_on() Brian Masney
2016-11-12 16:17 ` Jonathan Cameron
2016-11-10 9:25 ` [PATCH v3 02/28] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip Brian Masney
2016-11-12 16:23 ` Jonathan Cameron
2016-11-10 9:25 ` [PATCH v3 03/28] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store Brian Masney
2016-11-12 16:24 ` Jonathan Cameron
2016-11-12 16:27 ` Jonathan Cameron
2016-11-12 16:37 ` Brian Masney
2016-11-10 9:25 ` [PATCH v3 04/28] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux Brian Masney
2016-11-12 16:28 ` Jonathan Cameron
2016-11-10 9:25 ` [PATCH v3 05/28] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume Brian Masney
2016-11-12 16:31 ` Jonathan Cameron
2016-11-10 9:25 ` [PATCH v3 06/28] staging: iio: tsl2583: change current chip state from a tristate to a bool Brian Masney
2016-11-10 9:25 ` Brian Masney [this message]
2016-11-10 9:25 ` [PATCH v3 08/28] staging: iio: tsl2583: remove the FSF's mailing address Brian Masney
2016-11-10 9:25 ` [PATCH v3 09/28] staging: iio: tsl2583: cleaned up logging Brian Masney
2016-11-10 9:25 ` [PATCH v3 10/28] staging: iio: tsl2583: unify function and variable prefix to tsl2583_ Brian Masney
2016-11-10 9:25 ` [PATCH v3 11/28] staging: iio: tsl2583: fix alignment of #define values Brian Masney
2016-11-10 9:25 ` [PATCH v3 12/28] staging: iio: tsl2583: fix comparison between signed and unsigned integers Brian Masney
2016-11-10 9:25 ` [PATCH v3 13/28] staging: iio: tsl2583: change newlines to improve readability Brian Masney
2016-11-10 9:25 ` [PATCH v3 14/28] staging: iio: tsl2583: combine sysfs documentation Brian Masney
2016-11-10 9:25 ` [PATCH v3 15/28] staging: iio: tsl2583: fix multiline comment syntax Brian Masney
2016-11-10 9:25 ` [PATCH v3 16/28] staging: iio: tsl2583: updated code comment to match what the code does Brian Masney
2016-11-12 16:36 ` Jonathan Cameron
2016-11-12 16:59 ` Brian Masney
2016-11-12 17:10 ` Jonathan Cameron
2016-11-10 9:25 ` [PATCH v3 17/28] staging: iio: tsl2583: moved code block inside else statement Brian Masney
2016-11-10 9:25 ` [PATCH v3 18/28] staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success Brian Masney
2016-11-10 9:25 ` [PATCH v3 19/28] staging: iio: tsl2583: remove unnecessary parentheses Brian Masney
2016-11-10 9:25 ` [PATCH v3 20/28] staging: iio: tsl2583: don't assume an unsigned int is 32 bits Brian Masney
2016-11-12 16:38 ` Jonathan Cameron
2016-12-05 20:55 ` Dan Carpenter
2016-11-10 9:25 ` [PATCH v3 21/28] staging: iio: tsl2583: move from a global to a per device lux table Brian Masney
2016-11-12 16:44 ` Jonathan Cameron
2016-11-10 9:25 ` [PATCH v3 22/28] staging: iio: tsl2583: add tsl2583 to list of supported devices in the header Brian Masney
2016-11-10 9:25 ` [PATCH v3 23/28] staging: iio: tsl2583: clarified comment about clearing interrupts Brian Masney
2016-11-10 9:26 ` [PATCH v3 24/28] staging: iio: tsl2583: remove comment for tsl2583_probe() Brian Masney
2016-11-10 9:26 ` [PATCH v3 25/28] staging: iio: tsl2583: remove unnecessary memset call Brian Masney
2016-11-10 9:26 ` [PATCH v3 26/28] staging: iio: tsl2583: remove unnecessary variable initialization Brian Masney
2016-11-10 9:26 ` [PATCH v3 27/28] staging: iio: tsl2583: add copyright and MODULE_AUTHOR Brian Masney
2016-11-10 9:26 ` [PATCH v3 28/28] staging: iio: tsl2583: move out of staging Brian Masney
2016-11-12 16:47 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478769964-7065-8-git-send-email-masneyb@onstation.org \
--to=masneyb@onstation.org \
--cc=Jon.Brenner@ams.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).