[PATCH 30/39] mtd: nand: denali: set DEVICES_CONNECTED 1 if not set

[Masahiro Yamada <yamada.masahiro@socionext.com>]

Currently, the driver expects DEVICE_CONNECTED is automatically set
by the hardware, but this feature is disabled in some cases.
In such cases, it is the software's responsibility to set up the
DEVICES_CONNECTED register.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 drivers/mtd/nand/denali.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 71bdf2a..4b2bbcb 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1485,6 +1485,13 @@ static void denali_multidev_fixup(struct denali_nand_info *denali)
 	 */
 	denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
 
+	/*
+	 * On some SoCs, DEVICES_CONNECTED is not auto-detected. For those SoCs
+	 * DEVICES_CONNECT is left to 0.  Set 1 if it is the case.
+	 */
+	if (denali->devnum == 0)
+		denali->devnum = 1;
+
 	devnum_shift = fls(denali->devnum) - 1;
 
 	if (denali->devnum != BIT(devnum_shift)) {
@@ -1492,9 +1499,10 @@ static void denali_multidev_fixup(struct denali_nand_info *denali)
 			 "DEVICE_CONNECTED=%d is not power of 2. Some devices will not be used.\n",
 			 denali->devnum);
 		denali->devnum = BIT(devnum_shift);
-		iowrite32(denali->devnum, denali->flash_reg + DEVICES_CONNECTED);
 	}
 
+	iowrite32(denali->devnum, denali->flash_reg + DEVICES_CONNECTED);
+
 	mtd->size <<= devnum_shift;
 	mtd->erasesize <<= devnum_shift;
 	mtd->writesize <<= devnum_shift;
-- 
2.7.4