From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Jiri Kosina <jikos@kernel.org>,
Andrew Duggan <aduggan@synaptics.com>,
Lyude Paul <thatslyude@gmail.com>, Nick Dyer <nick@shmanahar.org>,
Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 00/13] RMI4 cleanups and switch hid-rmi to rmi_core
Date: Tue, 29 Nov 2016 11:08:11 +0100 [thread overview]
Message-ID: <1480414104-8524-1-git-send-email-benjamin.tissoires@redhat.com> (raw)
Hi guys,
This series applies on top of Dmitry's synaptics-rmi4 branch.
Patches 1-6 are cleanups which should be applied on this branch before it
gets merged with linux-next IMO. Nick, I updated the patch since our last
tests from last week. I'd be glad if you could give an other spin at testing
(patch 3 is a brancd new one which simplifies the rest of the series).
Patches 7-10 are requirements for hid-rmi to switch to rmi4_core.
It adds the PS/2 pass-through support and the API for hid-rmi to provide
the attention data.
Patches 10-13 are the HID ones. I wish they could go in together, but given
that we are getting closer than the merge window, I don't have many hopes for
them to be taken. Anyway, they are here and I'd like to get some feedback for
them too. I am able to only test these with a Synaptics test touchpad, so any
real hardware test (with F11 or F12) would be good.
I still have few rmi4 patches to switch the Lenovo Thinkpad to rmi-smbus,
but given they are touching serio+psmouse I guess they are more v4.11 material.
(for those wondering I already submitted those as 14-17 / 18 in the v3 of
rmi4-smbus).
I have pushed the series on my github account (with the smbus/psmouse too):
https://github.com/bentiss/linux/commits/synaptics-rmi4-v4.9-rc7%2B
(branch synaptics-rmi4-v4.9-rc7+)
Cheers,
Benjamin
Andrew Duggan (3):
HID: rmi: Make hid-rmi a transport driver for synaptics-rmi4
HID: rmi: Handle all Synaptics touchpads using hid-rmi
HID: rmi: Support the Lenovo Thinkpad X1 Tablet dock using hid-rmi
Benjamin Tissoires (8):
Input: synaptics-rmi4 - fix documentation of
rmi_2d_sensor_platform_data
Input: synaptics-rmi4 - remove unused fields in struct rmi_driver_data
Input: synaptics-rmi4 - add rmi_enable/disable_irq
Input: synaptics-rmi4 - remove mutex calls while updating the firmware
Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal
functions
Input: synaptics-rmi4 - have only one struct platform data
Input: synaptics-rmi4 - allow to add attention data
Input: synaptics-rmi4 - store the attn data in the driver
Dennis Wassenberg (1):
Input: synaptics-rmi4 - f03: grab data passed by transport device
Lyude Paul (1):
Input: synaptics-rmi4 - add support for F03
drivers/hid/Kconfig | 4 +
drivers/hid/hid-core.c | 4 +-
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-rmi.c | 974 ++++++-------------------------------
drivers/input/mouse/psmouse-base.c | 6 +
drivers/input/rmi4/Kconfig | 9 +
drivers/input/rmi4/Makefile | 1 +
drivers/input/rmi4/rmi_bus.c | 3 +
drivers/input/rmi4/rmi_driver.c | 186 ++++---
drivers/input/rmi4/rmi_driver.h | 6 +-
drivers/input/rmi4/rmi_f03.c | 245 ++++++++++
drivers/input/rmi4/rmi_f11.c | 16 +-
drivers/input/rmi4/rmi_f12.c | 47 +-
drivers/input/rmi4/rmi_f30.c | 20 +-
drivers/input/rmi4/rmi_f34.c | 19 +-
include/linux/rmi.h | 25 +-
include/uapi/linux/serio.h | 1 +
17 files changed, 609 insertions(+), 958 deletions(-)
create mode 100644 drivers/input/rmi4/rmi_f03.c
--
2.7.4
next reply other threads:[~2016-11-29 10:08 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-29 10:08 Benjamin Tissoires [this message]
2016-11-29 10:08 ` [PATCH 01/13] Input: synaptics-rmi4 - fix documentation of rmi_2d_sensor_platform_data Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 02/13] Input: synaptics-rmi4 - remove unused fields in struct rmi_driver_data Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 03/13] Input: synaptics-rmi4 - add rmi_enable/disable_irq Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 04/13] Input: synaptics-rmi4 - remove mutex calls while updating the firmware Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 05/13] Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 06/13] Input: synaptics-rmi4 - have only one struct platform data Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 07/13] Input: synaptics-rmi4 - add support for F03 Benjamin Tissoires
2016-12-01 1:36 ` Dmitry Torokhov
2016-12-01 14:54 ` Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 08/13] Input: synaptics-rmi4 - f03: grab data passed by transport device Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 09/13] Input: synaptics-rmi4 - allow to add attention data Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 10/13] Input: synaptics-rmi4 - store the attn data in the driver Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 11/13] HID: rmi: Make hid-rmi a transport driver for synaptics-rmi4 Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 12/13] HID: rmi: Handle all Synaptics touchpads using hid-rmi Benjamin Tissoires
2016-11-29 10:08 ` [PATCH 13/13] HID: rmi: Support the Lenovo Thinkpad X1 Tablet dock " Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480414104-8524-1-git-send-email-benjamin.tissoires@redhat.com \
--to=benjamin.tissoires@redhat.com \
--cc=aduggan@synaptics.com \
--cc=dennis.wassenberg@secunet.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=thatslyude@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).