From: Serge Semin <fancer.lancer@gmail.com>
To: jdmason@kudzu.us, dave.jiang@intel.com, Allen.Hubbe@emc.com,
Xiangliang.Yu@amd.com
Cc: Sergey.Semin@t-platforms.ru, linux-ntb@googlegroups.com,
linux-kernel@vger.kernel.org,
Serge Semin <fancer.lancer@gmail.com>
Subject: [PATCH 14/22] NTB AMD: Move link-related methods being first in the driver
Date: Tue, 29 Nov 2016 20:16:09 +0300 [thread overview]
Message-ID: <1480439777-1080-15-git-send-email-fancer.lancer@gmail.com> (raw)
In-Reply-To: <1480439777-1080-1-git-send-email-fancer.lancer@gmail.com>
See patch 01 for reasoning of this movement.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
drivers/ntb/hw/amd/ntb_hw_amd.c | 188 ++++++++++++++++++++--------------------
1 file changed, 94 insertions(+), 94 deletions(-)
diff --git a/drivers/ntb/hw/amd/ntb_hw_amd.c b/drivers/ntb/hw/amd/ntb_hw_amd.c
index 6ccba0d..6704327 100644
--- a/drivers/ntb/hw/amd/ntb_hw_amd.c
+++ b/drivers/ntb/hw/amd/ntb_hw_amd.c
@@ -71,6 +71,97 @@ MODULE_AUTHOR("AMD Inc.");
static const struct file_operations amd_ntb_debugfs_info;
static struct dentry *debugfs_dir;
+static int amd_link_is_up(struct amd_ntb_dev *ndev)
+{
+ if (!ndev->peer_sta)
+ return NTB_LNK_STA_ACTIVE(ndev->cntl_sta);
+
+ /* If peer_sta is reset or D0 event, the ISR has
+ * started a timer to check link status of hardware.
+ * So here just clear status bit. And if peer_sta is
+ * D3 or PME_TO, D0/reset event will be happened when
+ * system wakeup/poweron, so do nothing here.
+ */
+ if (ndev->peer_sta & AMD_PEER_RESET_EVENT)
+ ndev->peer_sta &= ~AMD_PEER_RESET_EVENT;
+ else if (ndev->peer_sta & AMD_PEER_D0_EVENT)
+ ndev->peer_sta = 0;
+
+ return 0;
+}
+
+static int amd_ntb_link_is_up(struct ntb_dev *ntb,
+ enum ntb_speed *speed,
+ enum ntb_width *width)
+{
+ struct amd_ntb_dev *ndev = ntb_ndev(ntb);
+ int ret = 0;
+
+ if (amd_link_is_up(ndev)) {
+ if (speed)
+ *speed = NTB_LNK_STA_SPEED(ndev->lnk_sta);
+ if (width)
+ *width = NTB_LNK_STA_WIDTH(ndev->lnk_sta);
+
+ dev_dbg(ndev_dev(ndev), "link is up.\n");
+
+ ret = 1;
+ } else {
+ if (speed)
+ *speed = NTB_SPEED_NONE;
+ if (width)
+ *width = NTB_WIDTH_NONE;
+
+ dev_dbg(ndev_dev(ndev), "link is down.\n");
+ }
+
+ return ret;
+}
+
+static int amd_ntb_link_enable(struct ntb_dev *ntb,
+ enum ntb_speed max_speed,
+ enum ntb_width max_width)
+{
+ struct amd_ntb_dev *ndev = ntb_ndev(ntb);
+ void __iomem *mmio = ndev->self_mmio;
+ u32 ntb_ctl;
+
+ /* Enable event interrupt */
+ ndev->int_mask &= ~AMD_EVENT_INTMASK;
+ writel(ndev->int_mask, mmio + AMD_INTMASK_OFFSET);
+
+ if (ndev->ntb.topo == NTB_TOPO_SEC)
+ return -EINVAL;
+ dev_dbg(ndev_dev(ndev), "Enabling Link.\n");
+
+ ntb_ctl = readl(mmio + AMD_CNTL_OFFSET);
+ ntb_ctl |= (PMM_REG_CTL | SMM_REG_CTL);
+ writel(ntb_ctl, mmio + AMD_CNTL_OFFSET);
+
+ return 0;
+}
+
+static int amd_ntb_link_disable(struct ntb_dev *ntb)
+{
+ struct amd_ntb_dev *ndev = ntb_ndev(ntb);
+ void __iomem *mmio = ndev->self_mmio;
+ u32 ntb_ctl;
+
+ /* Disable event interrupt */
+ ndev->int_mask |= AMD_EVENT_INTMASK;
+ writel(ndev->int_mask, mmio + AMD_INTMASK_OFFSET);
+
+ if (ndev->ntb.topo == NTB_TOPO_SEC)
+ return -EINVAL;
+ dev_dbg(ndev_dev(ndev), "Enabling Link.\n");
+
+ ntb_ctl = readl(mmio + AMD_CNTL_OFFSET);
+ ntb_ctl &= ~(PMM_REG_CTL | SMM_REG_CTL);
+ writel(ntb_ctl, mmio + AMD_CNTL_OFFSET);
+
+ return 0;
+}
+
static int ndev_mw_to_bar(struct amd_ntb_dev *ndev, int idx)
{
if (idx < 0 || idx > ndev->mw_count)
@@ -194,97 +285,6 @@ static int amd_ntb_mw_set_trans(struct ntb_dev *ntb, int idx,
return 0;
}
-static int amd_link_is_up(struct amd_ntb_dev *ndev)
-{
- if (!ndev->peer_sta)
- return NTB_LNK_STA_ACTIVE(ndev->cntl_sta);
-
- /* If peer_sta is reset or D0 event, the ISR has
- * started a timer to check link status of hardware.
- * So here just clear status bit. And if peer_sta is
- * D3 or PME_TO, D0/reset event will be happened when
- * system wakeup/poweron, so do nothing here.
- */
- if (ndev->peer_sta & AMD_PEER_RESET_EVENT)
- ndev->peer_sta &= ~AMD_PEER_RESET_EVENT;
- else if (ndev->peer_sta & AMD_PEER_D0_EVENT)
- ndev->peer_sta = 0;
-
- return 0;
-}
-
-static int amd_ntb_link_is_up(struct ntb_dev *ntb,
- enum ntb_speed *speed,
- enum ntb_width *width)
-{
- struct amd_ntb_dev *ndev = ntb_ndev(ntb);
- int ret = 0;
-
- if (amd_link_is_up(ndev)) {
- if (speed)
- *speed = NTB_LNK_STA_SPEED(ndev->lnk_sta);
- if (width)
- *width = NTB_LNK_STA_WIDTH(ndev->lnk_sta);
-
- dev_dbg(ndev_dev(ndev), "link is up.\n");
-
- ret = 1;
- } else {
- if (speed)
- *speed = NTB_SPEED_NONE;
- if (width)
- *width = NTB_WIDTH_NONE;
-
- dev_dbg(ndev_dev(ndev), "link is down.\n");
- }
-
- return ret;
-}
-
-static int amd_ntb_link_enable(struct ntb_dev *ntb,
- enum ntb_speed max_speed,
- enum ntb_width max_width)
-{
- struct amd_ntb_dev *ndev = ntb_ndev(ntb);
- void __iomem *mmio = ndev->self_mmio;
- u32 ntb_ctl;
-
- /* Enable event interrupt */
- ndev->int_mask &= ~AMD_EVENT_INTMASK;
- writel(ndev->int_mask, mmio + AMD_INTMASK_OFFSET);
-
- if (ndev->ntb.topo == NTB_TOPO_SEC)
- return -EINVAL;
- dev_dbg(ndev_dev(ndev), "Enabling Link.\n");
-
- ntb_ctl = readl(mmio + AMD_CNTL_OFFSET);
- ntb_ctl |= (PMM_REG_CTL | SMM_REG_CTL);
- writel(ntb_ctl, mmio + AMD_CNTL_OFFSET);
-
- return 0;
-}
-
-static int amd_ntb_link_disable(struct ntb_dev *ntb)
-{
- struct amd_ntb_dev *ndev = ntb_ndev(ntb);
- void __iomem *mmio = ndev->self_mmio;
- u32 ntb_ctl;
-
- /* Disable event interrupt */
- ndev->int_mask |= AMD_EVENT_INTMASK;
- writel(ndev->int_mask, mmio + AMD_INTMASK_OFFSET);
-
- if (ndev->ntb.topo == NTB_TOPO_SEC)
- return -EINVAL;
- dev_dbg(ndev_dev(ndev), "Enabling Link.\n");
-
- ntb_ctl = readl(mmio + AMD_CNTL_OFFSET);
- ntb_ctl &= ~(PMM_REG_CTL | SMM_REG_CTL);
- writel(ntb_ctl, mmio + AMD_CNTL_OFFSET);
-
- return 0;
-}
-
static u64 amd_ntb_db_valid_mask(struct ntb_dev *ntb)
{
return ntb_ndev(ntb)->db_valid_mask;
@@ -431,12 +431,12 @@ static int amd_ntb_peer_spad_write(struct ntb_dev *ntb,
}
static const struct ntb_dev_ops amd_ntb_ops = {
- .mw_count = amd_ntb_mw_count,
- .mw_get_range = amd_ntb_mw_get_range,
- .mw_set_trans = amd_ntb_mw_set_trans,
.link_is_up = amd_ntb_link_is_up,
.link_enable = amd_ntb_link_enable,
.link_disable = amd_ntb_link_disable,
+ .mw_count = amd_ntb_mw_count,
+ .mw_get_range = amd_ntb_mw_get_range,
+ .mw_set_trans = amd_ntb_mw_set_trans,
.db_valid_mask = amd_ntb_db_valid_mask,
.db_vector_count = amd_ntb_db_vector_count,
.db_vector_mask = amd_ntb_db_vector_mask,
--
2.6.6
next prev parent reply other threads:[~2016-11-29 17:20 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-29 17:15 [PATCH 00/22] NTB: Alter kernel API to support multi-port devices Serge Semin
2016-11-29 17:15 ` [PATCH 01/22] NTB: Move link state API being first in sources Serge Semin
2016-11-29 17:15 ` [PATCH 02/22] NTB: Add peer indexed ports NTB API Serge Semin
2016-11-30 18:40 ` kbuild test robot
2016-11-30 19:12 ` kbuild test robot
2016-11-30 20:04 ` kbuild test robot
2016-11-29 17:15 ` [PATCH 03/22] NTB: Alter NTB API to support both inbound and outbound MW based interfaces Serge Semin
2016-11-30 18:54 ` kbuild test robot
2016-11-30 19:46 ` kbuild test robot
2016-11-29 17:15 ` [PATCH 04/22] NTB: Add messaging NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 05/22] NTB: Alter Scratchpads NTB API to support multi-ports interface Serge Semin
2016-11-29 17:16 ` [PATCH 06/22] NTB: Slightly alter link state NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 07/22] NTB: Fix a few ntb.h issues Serge Semin
2016-11-29 17:16 ` [PATCH 08/22] NTB: Add T-Platforms copyrights to NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 09/22] NTB Intel: Move link-related methods being first in the driver Serge Semin
2016-11-29 17:16 ` [PATCH 10/22] NTB Intel: Add port-related NTB API callback methods Serge Semin
2016-12-07 22:56 ` Allen Hubbe
2016-11-29 17:16 ` [PATCH 11/22] NTB Intel: Alter MW interface to fit new NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 12/22] NTB Intel: Alter Scratchpads " Serge Semin
2016-11-29 17:16 ` [PATCH 13/22] NTB Intel: Add T-Platforms copyrights to Intel NTB driver Serge Semin
2016-11-29 17:16 ` Serge Semin [this message]
2016-11-29 17:16 ` [PATCH 15/22] NTB AMD: Add port-related NTB API callback methods Serge Semin
2016-11-29 17:16 ` [PATCH 16/22] NTB AMD: Alter MW interface to fit new NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 17/22] NTB AMD: Alter Scratchpads " Serge Semin
2016-11-29 17:16 ` [PATCH 18/22] NTB AMD: Add T-Platforms copyrights to AMD NTB driver Serge Semin
2016-11-29 17:16 ` [PATCH 19/22] NTB PingPong: Alter driver to work with two-ports NTB API Serge Semin
2016-11-29 17:16 ` [PATCH 20/22] NTB Tool: " Serge Semin
2016-11-29 17:16 ` [PATCH 21/22] NTB Perf: " Serge Semin
2016-11-29 17:16 ` [PATCH 22/22] NTB Transport: " Serge Semin
2016-12-12 21:08 ` [PATCH v2 0/9] NTB: Alter kernel API to support multi-port devices Serge Semin
2016-12-12 21:08 ` [PATCH v2 1/9] NTB: Make link-state API being declared first Serge Semin
2016-12-12 21:08 ` [PATCH v2 2/9] NTB: Add indexed ports NTB API Serge Semin
2016-12-12 21:08 ` [PATCH v2 3/9] NTB: Alter link-state API to support multi-port devices Serge Semin
2016-12-12 21:08 ` [PATCH v2 4/9] NTB: Alter MW API to support multi-ports devices Serge Semin
2016-12-12 21:08 ` [PATCH v2 5/9] NTB: Alter Scratchpads " Serge Semin
2016-12-12 21:08 ` [PATCH v2 6/9] NTB: Add Messaging NTB API Serge Semin
2016-12-12 21:08 ` [PATCH v2 7/9] NTB: Add new Memory Windows API documentation Serge Semin
2016-12-12 21:08 ` [PATCH v2 8/9] NTB: Add PCIe Gen4 link speed Serge Semin
2016-12-12 21:08 ` [PATCH v2 9/9] NTB: Add ntb.h comments Serge Semin
2016-12-13 23:49 ` [PATCH v3 0/9] NTB: Alter kernel API to support multi-port devices Serge Semin
2016-12-13 23:49 ` [PATCH v3 1/9] NTB: Make link-state API being declared first Serge Semin
2016-12-14 7:07 ` Allen Hubbe
2016-12-13 23:49 ` [PATCH v3 2/9] NTB: Add indexed ports NTB API Serge Semin
2016-12-14 7:07 ` Allen Hubbe
2016-12-13 23:49 ` [PATCH v3 3/9] NTB: Alter link-state API to support multi-port devices Serge Semin
2016-12-13 23:49 ` [PATCH v3 4/9] NTB: Alter MW API to support multi-ports devices Serge Semin
2016-12-14 7:08 ` Allen Hubbe
2017-01-11 0:11 ` Serge Semin
2016-12-13 23:49 ` [PATCH v3 5/9] NTB: Alter Scratchpads " Serge Semin
2016-12-14 7:08 ` Allen Hubbe
2017-01-11 0:13 ` Serge Semin
2017-02-01 20:01 ` Jon Mason
2016-12-13 23:49 ` [PATCH v3 6/9] NTB: Add Messaging NTB API Serge Semin
2016-12-20 9:48 ` Serge Semin
2016-12-13 23:49 ` [PATCH v3 7/9] NTB: Add new Memory Windows API documentation Serge Semin
2016-12-13 23:49 ` [PATCH v3 8/9] NTB: Add PCIe Gen4 link speed Serge Semin
2016-12-13 23:49 ` [PATCH v3 9/9] NTB: Add ntb.h comments Serge Semin
2016-12-14 7:09 ` Allen Hubbe
2016-12-14 7:16 ` Serge Semin
2016-12-14 7:19 ` Allen Hubbe
2016-12-20 9:50 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480439777-1080-15-git-send-email-fancer.lancer@gmail.com \
--to=fancer.lancer@gmail.com \
--cc=Allen.Hubbe@emc.com \
--cc=Sergey.Semin@t-platforms.ru \
--cc=Xiangliang.Yu@amd.com \
--cc=dave.jiang@intel.com \
--cc=jdmason@kudzu.us \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-ntb@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).