* [PATCH 0/7] perf tools: Force fixdep to be built first
@ 2016-12-04 20:42 Jiri Olsa
2016-12-04 20:42 ` [PATCH 1/7] tools build: Make the .cmd file more readable Jiri Olsa
` (6 more replies)
0 siblings, 7 replies; 16+ messages in thread
From: Jiri Olsa @ 2016-12-04 20:42 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
hi,
changing Makefile.perf to force building fixdep before everything
else, in order to avoid fixdep build races due to forgotten dependencies.
And some build fixes that piled up around the fixdep change.
Available also here:
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
perf/fixes
Arnaldo,
this is based on top of your acme/tmp.perf/fixdep branch.
thanks,
jirka
---
Jiri Olsa (7):
tools build: Make the .cmd file more readable
tools build: Move tabs to spaces where suitable
perf tools: Move install-gtk target into rules area
perf tools: Move python/perf.so target into rules area
perf tools: Force fixdep compilation at the start of the build
perf tools: Add non config targets
perf tools: Cleanup build directory before each test
tools/build/Build.include | 14 +++++------
tools/build/Makefile.feature | 138 +++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------------------------
tools/build/feature/Makefile | 102 +++++++++++++++++++++++++++++++++++++--------------------------------------
tools/perf/Makefile.perf | 87 ++++++++++++++++++++++++++++++++++++++++++----------------------
tools/perf/tests/make | 2 +-
5 files changed, 186 insertions(+), 157 deletions(-)
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/7] tools build: Make the .cmd file more readable
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
@ 2016-12-04 20:42 ` Jiri Olsa
2016-12-06 8:27 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 2/7] tools build: Move tabs to spaces where suitable Jiri Olsa
` (5 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Jiri Olsa @ 2016-12-04 20:42 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
Putting extra line between dependencies and cmd_* definition
to make it more readable.
Before:
$ cat .builtin-top.o.cmd
...
/home/jolsa/kernel/linux-perf/tools/include/linux/stringify.h \
/home/jolsa/kernel/linux-perf/tools/include/linux/time64.h
cmd_builtin-top.o := gcc -Wp,-MD,./.builtin-top.o.d -Wp,-MT,builtin-...
...
After:
$ cat .builtin-top.o.cmd
...
/home/jolsa/kernel/linux-perf/tools/include/linux/stringify.h \
/home/jolsa/kernel/linux-perf/tools/include/linux/time64.h
cmd_builtin-top.o := gcc -Wp,-MD,./.builtin-top.o.d -Wp,-MT,builtin-...
...
Link: http://lkml.kernel.org/n/tip-4kuibvf3v9qqae1rbwv8py6a@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/build/Build.include | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/build/Build.include b/tools/build/Build.include
index 62dcf0c7aac2..475152c52871 100644
--- a/tools/build/Build.include
+++ b/tools/build/Build.include
@@ -65,7 +65,7 @@ dep-cmd = $(if $(wildcard $(fixdep)),
printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \
printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \
cat $(depfile) >> $(dot-target).cmd; \
- printf '%s\n' 'cmd_$@ := $(make-cmd)' >> $(dot-target).cmd)
+ printf '\n%s\n' 'cmd_$@ := $(make-cmd)' >> $(dot-target).cmd)
###
# if_changed_dep - execute command if any prerequisite is newer than
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/7] tools build: Move tabs to spaces where suitable
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
2016-12-04 20:42 ` [PATCH 1/7] tools build: Make the .cmd file more readable Jiri Olsa
@ 2016-12-04 20:42 ` Jiri Olsa
2016-12-06 8:27 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 3/7] perf tools: Move install-gtk target into rules area Jiri Olsa
` (4 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Jiri Olsa @ 2016-12-04 20:42 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
We've been hit several times with Makefile bug where
line indented by tab was falsely considered as target
command.
We prevent this to use always space indentation for
everything except the target commands.
Link: http://lkml.kernel.org/n/tip-hxo9kg6geiw8hnyte7kgp04c@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/build/Build.include | 12 ++--
tools/build/Makefile.feature | 138 +++++++++++++++++++++----------------------
tools/build/feature/Makefile | 102 ++++++++++++++++----------------
3 files changed, 126 insertions(+), 126 deletions(-)
diff --git a/tools/build/Build.include b/tools/build/Build.include
index 475152c52871..418871d02ebf 100644
--- a/tools/build/Build.include
+++ b/tools/build/Build.include
@@ -72,15 +72,15 @@ dep-cmd = $(if $(wildcard $(fixdep)),
# target, or command line has changed and update
# dependencies in the cmd file
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check)), \
- @set -e; \
- $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
+ @set -e; \
+ $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
# if_changed - execute command if any prerequisite is newer than
# target, or command line has changed
-if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
- @set -e; \
- $(echo-cmd) $(cmd_$(1)); \
- printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
+ @set -e; \
+ $(echo-cmd) $(cmd_$(1)); \
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
###
# C flags to be used in rule definitions, includes:
diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
index ae52e029dd22..e3fb5ecbdcb6 100644
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -27,58 +27,58 @@ endef
# the rule that uses them - an example for that is the 'bionic'
# feature check. ]
#
-FEATURE_TESTS_BASIC := \
- backtrace \
- dwarf \
- dwarf_getlocations \
- fortify-source \
- sync-compare-and-swap \
- glibc \
- gtk2 \
- gtk2-infobar \
- libaudit \
- libbfd \
- libelf \
- libelf-getphdrnum \
- libelf-gelf_getnote \
- libelf-getshdrstrndx \
- libelf-mmap \
- libnuma \
- numa_num_possible_cpus \
- libperl \
- libpython \
- libpython-version \
- libslang \
- libcrypto \
- libunwind \
- libunwind-x86 \
- libunwind-x86_64 \
- libunwind-arm \
- libunwind-aarch64 \
- pthread-attr-setaffinity-np \
- stackprotector-all \
- timerfd \
- libdw-dwarf-unwind \
- zlib \
- lzma \
- get_cpuid \
- bpf \
- sdt
+FEATURE_TESTS_BASIC := \
+ backtrace \
+ dwarf \
+ dwarf_getlocations \
+ fortify-source \
+ sync-compare-and-swap \
+ glibc \
+ gtk2 \
+ gtk2-infobar \
+ libaudit \
+ libbfd \
+ libelf \
+ libelf-getphdrnum \
+ libelf-gelf_getnote \
+ libelf-getshdrstrndx \
+ libelf-mmap \
+ libnuma \
+ numa_num_possible_cpus \
+ libperl \
+ libpython \
+ libpython-version \
+ libslang \
+ libcrypto \
+ libunwind \
+ libunwind-x86 \
+ libunwind-x86_64 \
+ libunwind-arm \
+ libunwind-aarch64 \
+ pthread-attr-setaffinity-np \
+ stackprotector-all \
+ timerfd \
+ libdw-dwarf-unwind \
+ zlib \
+ lzma \
+ get_cpuid \
+ bpf \
+ sdt
# FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list
# of all feature tests
-FEATURE_TESTS_EXTRA := \
- bionic \
- compile-32 \
- compile-x32 \
- cplus-demangle \
- hello \
- libbabeltrace \
- liberty \
- liberty-z \
- libunwind-debug-frame \
- libunwind-debug-frame-arm \
- libunwind-debug-frame-aarch64
+FEATURE_TESTS_EXTRA := \
+ bionic \
+ compile-32 \
+ compile-x32 \
+ cplus-demangle \
+ hello \
+ libbabeltrace \
+ liberty \
+ liberty-z \
+ libunwind-debug-frame \
+ libunwind-debug-frame-arm \
+ libunwind-debug-frame-aarch64
FEATURE_TESTS ?= $(FEATURE_TESTS_BASIC)
@@ -86,26 +86,26 @@ ifeq ($(FEATURE_TESTS),all)
FEATURE_TESTS := $(FEATURE_TESTS_BASIC) $(FEATURE_TESTS_EXTRA)
endif
-FEATURE_DISPLAY ?= \
- dwarf \
- dwarf_getlocations \
- glibc \
- gtk2 \
- libaudit \
- libbfd \
- libelf \
- libnuma \
- numa_num_possible_cpus \
- libperl \
- libpython \
- libslang \
- libcrypto \
- libunwind \
- libdw-dwarf-unwind \
- zlib \
- lzma \
- get_cpuid \
- bpf
+FEATURE_DISPLAY ?= \
+ dwarf \
+ dwarf_getlocations \
+ glibc \
+ gtk2 \
+ libaudit \
+ libbfd \
+ libelf \
+ libnuma \
+ numa_num_possible_cpus \
+ libperl \
+ libpython \
+ libslang \
+ libcrypto \
+ libunwind \
+ libdw-dwarf-unwind \
+ zlib \
+ lzma \
+ get_cpuid \
+ bpf
# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index 8f668bce8996..c6a34c8eaa20 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -1,54 +1,54 @@
-FILES= \
- test-all.bin \
- test-backtrace.bin \
- test-bionic.bin \
- test-dwarf.bin \
- test-dwarf_getlocations.bin \
- test-fortify-source.bin \
- test-sync-compare-and-swap.bin \
- test-glibc.bin \
- test-gtk2.bin \
- test-gtk2-infobar.bin \
- test-hello.bin \
- test-libaudit.bin \
- test-libbfd.bin \
- test-liberty.bin \
- test-liberty-z.bin \
- test-cplus-demangle.bin \
- test-libelf.bin \
- test-libelf-getphdrnum.bin \
- test-libelf-gelf_getnote.bin \
- test-libelf-getshdrstrndx.bin \
- test-libelf-mmap.bin \
- test-libnuma.bin \
- test-numa_num_possible_cpus.bin \
- test-libperl.bin \
- test-libpython.bin \
- test-libpython-version.bin \
- test-libslang.bin \
- test-libcrypto.bin \
- test-libunwind.bin \
- test-libunwind-debug-frame.bin \
- test-libunwind-x86.bin \
- test-libunwind-x86_64.bin \
- test-libunwind-arm.bin \
- test-libunwind-aarch64.bin \
- test-libunwind-debug-frame-arm.bin \
- test-libunwind-debug-frame-aarch64.bin \
- test-pthread-attr-setaffinity-np.bin \
- test-stackprotector-all.bin \
- test-timerfd.bin \
- test-libdw-dwarf-unwind.bin \
- test-libbabeltrace.bin \
- test-compile-32.bin \
- test-compile-x32.bin \
- test-zlib.bin \
- test-lzma.bin \
- test-bpf.bin \
- test-get_cpuid.bin \
- test-sdt.bin \
- test-cxx.bin \
- test-jvmti.bin
+FILES= \
+ test-all.bin \
+ test-backtrace.bin \
+ test-bionic.bin \
+ test-dwarf.bin \
+ test-dwarf_getlocations.bin \
+ test-fortify-source.bin \
+ test-sync-compare-and-swap.bin \
+ test-glibc.bin \
+ test-gtk2.bin \
+ test-gtk2-infobar.bin \
+ test-hello.bin \
+ test-libaudit.bin \
+ test-libbfd.bin \
+ test-liberty.bin \
+ test-liberty-z.bin \
+ test-cplus-demangle.bin \
+ test-libelf.bin \
+ test-libelf-getphdrnum.bin \
+ test-libelf-gelf_getnote.bin \
+ test-libelf-getshdrstrndx.bin \
+ test-libelf-mmap.bin \
+ test-libnuma.bin \
+ test-numa_num_possible_cpus.bin \
+ test-libperl.bin \
+ test-libpython.bin \
+ test-libpython-version.bin \
+ test-libslang.bin \
+ test-libcrypto.bin \
+ test-libunwind.bin \
+ test-libunwind-debug-frame.bin \
+ test-libunwind-x86.bin \
+ test-libunwind-x86_64.bin \
+ test-libunwind-arm.bin \
+ test-libunwind-aarch64.bin \
+ test-libunwind-debug-frame-arm.bin \
+ test-libunwind-debug-frame-aarch64.bin \
+ test-pthread-attr-setaffinity-np.bin \
+ test-stackprotector-all.bin \
+ test-timerfd.bin \
+ test-libdw-dwarf-unwind.bin \
+ test-libbabeltrace.bin \
+ test-compile-32.bin \
+ test-compile-x32.bin \
+ test-zlib.bin \
+ test-lzma.bin \
+ test-bpf.bin \
+ test-get_cpuid.bin \
+ test-sdt.bin \
+ test-cxx.bin \
+ test-jvmti.bin
FILES := $(addprefix $(OUTPUT),$(FILES))
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/7] perf tools: Move install-gtk target into rules area
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
2016-12-04 20:42 ` [PATCH 1/7] tools build: Make the .cmd file more readable Jiri Olsa
2016-12-04 20:42 ` [PATCH 2/7] tools build: Move tabs to spaces where suitable Jiri Olsa
@ 2016-12-04 20:42 ` Jiri Olsa
2016-12-06 8:28 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 4/7] perf tools: Move python/perf.so " Jiri Olsa
` (3 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Jiri Olsa @ 2016-12-04 20:42 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
Following fixdep fix needs all targets at the same area,
so they'll fit under signal condition block.
Moving install-gtk target into rules section.
Link: http://lkml.kernel.org/n/tip-0xk7ca6fdvv6jg71lp40yj5x@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/perf/Makefile.perf | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 3cb1df43ad3e..2e95456108d7 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -325,11 +325,6 @@ endif
ifndef NO_GTK2
ALL_PROGRAMS += $(OUTPUT)libperf-gtk.so
GTK_IN := $(OUTPUT)gtk-in.o
-
-install-gtk: $(OUTPUT)libperf-gtk.so
- $(call QUIET_INSTALL, 'GTK UI') \
- $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(libdir_SQ)'; \
- $(INSTALL) $(OUTPUT)libperf-gtk.so '$(DESTDIR_SQ)$(libdir_SQ)'
endif
ifdef ASCIIDOC8
@@ -691,7 +686,14 @@ check: $(OUTPUT)common-cmds.h
### Installation rules
+ifndef NO_GTK2
+install-gtk: $(OUTPUT)libperf-gtk.so
+ $(call QUIET_INSTALL, 'GTK UI') \
+ $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(libdir_SQ)'; \
+ $(INSTALL) $(OUTPUT)libperf-gtk.so '$(DESTDIR_SQ)$(libdir_SQ)'
+else
install-gtk:
+endif
install-tools: all install-gtk
$(call QUIET_INSTALL, binaries) \
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 4/7] perf tools: Move python/perf.so target into rules area
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
` (2 preceding siblings ...)
2016-12-04 20:42 ` [PATCH 3/7] perf tools: Move install-gtk target into rules area Jiri Olsa
@ 2016-12-04 20:42 ` Jiri Olsa
2016-12-06 8:28 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 5/7] perf tools: Force fixdep compilation at the start of the build Jiri Olsa
` (2 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Jiri Olsa @ 2016-12-04 20:42 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
Following fixdep fix needs all targets at the same area,
so they'll fit under signal condition block.
Moving python/perf.so target into rules section and
intentionally removing the perl script related comment.
Link: http://lkml.kernel.org/n/tip-0xk7ca6fdvv6jg71lp40yj5x@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/perf/Makefile.perf | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 2e95456108d7..112f4f7bb200 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -262,17 +262,6 @@ python-clean := $(call QUIET_CLEAN, python) $(RM) -r $(PYTHON_EXTBUILD) $(OUTPUT
PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources)
PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py $(LIBTRACEEVENT) $(LIBAPI)
-$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) $(LIBTRACEEVENT_DYNAMIC_LIST)
- $(QUIET_GEN)LDSHARED="$(CC) -pthread -shared" \
- CFLAGS='$(CFLAGS)' LDFLAGS='$(LDFLAGS) $(LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS)' \
- $(PYTHON_WORD) util/setup.py \
- --quiet build_ext; \
- mkdir -p $(OUTPUT)python && \
- cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/
-#
-# No Perl scripts right now:
-#
-
SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH))
PROGRAMS += $(OUTPUT)perf
@@ -341,6 +330,14 @@ SHELL = $(SHELL_PATH)
all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
+$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) $(LIBTRACEEVENT_DYNAMIC_LIST)
+ $(QUIET_GEN)LDSHARED="$(CC) -pthread -shared" \
+ CFLAGS='$(CFLAGS)' LDFLAGS='$(LDFLAGS) $(LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS)' \
+ $(PYTHON_WORD) util/setup.py \
+ --quiet build_ext; \
+ mkdir -p $(OUTPUT)python && \
+ cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/
+
please_set_SHELL_PATH_to_a_more_modern_shell:
$(Q)$$(:)
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 5/7] perf tools: Force fixdep compilation at the start of the build
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
` (3 preceding siblings ...)
2016-12-04 20:42 ` [PATCH 4/7] perf tools: Move python/perf.so " Jiri Olsa
@ 2016-12-04 20:42 ` Jiri Olsa
2016-12-05 20:02 ` Arnaldo Carvalho de Melo
2016-12-04 20:42 ` [PATCH 6/7] perf tools: Add non config targets Jiri Olsa
2016-12-04 20:42 ` [PATCH 7/7] perf tools: Cleanup build directory before each test Jiri Olsa
6 siblings, 1 reply; 16+ messages in thread
From: Jiri Olsa @ 2016-12-04 20:42 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
The fixdep tool needs to be built before everything else,
because it fixes every object dependency file.
We handle this currently by making all objects to depend
on fixdep, which is error prone and is easily forgotten
when new object is added.
Instead of this, this patch force fixdep tool to be built
as the first target in the separate make session. This way
we don't need to handle extra fixdep dependencies and we are
certain there's no fixdep race with any parallel make job.
Link: http://lkml.kernel.org/n/tip-b6wi5cssl8apu74o2kbfheag@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/perf/Makefile.perf | 54 +++++++++++++++++++++++++++++++++++++-----------
1 file changed, 42 insertions(+), 12 deletions(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 112f4f7bb200..25d9d6653746 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -179,6 +179,27 @@ ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),)
endif
endif
+# The fixdep build - we force fixdep tool to be built as
+# the first target in the separate make session not to be
+# disturbed by any parallel make jobs. Once fixdep is done
+# we issue the requested build with FIXDEP=1 variable.
+#
+# The fixdep build is disabled for $(NON_CONFIG_TARGETS)
+# targets, because it's not necessary.
+
+ifdef FIXDEP
+ force_fixdep := 0
+else
+ force_fixdep := $(config)
+endif
+
+# Disable config, we are forcing fixdep rule first
+# and it does not need config data.
+
+ifeq ($(force_fixdep),1)
+ config := 0
+endif
+
# Set FEATURE_TESTS to 'all' so all possible feature checkers are executed.
# Without this setting the output feature dump file misses some features, for
# example, liberty. Select all checkers so we won't get an incomplete feature
@@ -324,10 +345,22 @@ LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group
export INSTALL SHELL_PATH
+export srctree OUTPUT RM CC LD AR CFLAGS V BISON FLEX AWK
+export HOSTCC HOSTLD HOSTAR
+include $(srctree)/tools/build/Makefile.include
+
### Build rules
SHELL = $(SHELL_PATH)
+ifeq ($(force_fixdep),1)
+goals := $(filter-out all sub-make, $(MAKECMDGOALS))
+
+$(goals) all: sub-make
+
+sub-make: fixdep
+ $(Q)$(MAKE) FIXDEP=1 -f Makefile.perf $(goals)
+else
all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) $(LIBTRACEEVENT_DYNAMIC_LIST)
@@ -348,10 +381,6 @@ strip: $(PROGRAMS) $(OUTPUT)perf
PERF_IN := $(OUTPUT)perf-in.o
-export srctree OUTPUT RM CC LD AR CFLAGS V BISON FLEX AWK
-export HOSTCC HOSTLD HOSTAR
-include $(srctree)/tools/build/Makefile.include
-
JEVENTS := $(OUTPUT)pmu-events/jevents
JEVENTS_IN := $(OUTPUT)pmu-events/jevents-in.o
@@ -470,7 +499,7 @@ $(OUTPUT)perf: $(PERFLIBS) $(PERF_IN) $(PMU_EVENTS_IN) $(LIBTRACEEVENT_DYNAMIC_L
$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $(LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS) \
$(PERF_IN) $(PMU_EVENTS_IN) $(LIBS) -o $@
-$(GTK_IN): fixdep FORCE
+$(GTK_IN): FORCE
$(Q)$(MAKE) $(build)=gtk
$(OUTPUT)libperf-gtk.so: $(GTK_IN) $(PERFLIBS)
@@ -515,7 +544,7 @@ endif
__build-dir = $(subst $(OUTPUT),,$(dir $@))
build-dir = $(if $(__build-dir),$(__build-dir),.)
-prepare: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h fixdep archheaders
+prepare: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h archheaders
$(OUTPUT)%.o: %.c prepare FORCE
$(Q)$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@
@@ -565,7 +594,7 @@ $(patsubst perf-%,%.o,$(PROGRAMS)): $(wildcard */*.h)
LIBPERF_IN := $(OUTPUT)libperf-in.o
-$(LIBPERF_IN): prepare fixdep FORCE
+$(LIBPERF_IN): prepare FORCE
$(Q)$(MAKE) $(build)=libperf
$(LIB_FILE): $(LIBPERF_IN)
@@ -573,10 +602,10 @@ $(LIB_FILE): $(LIBPERF_IN)
LIBTRACEEVENT_FLAGS += plugin_dir=$(plugindir_SQ)
-$(LIBTRACEEVENT): fixdep FORCE
+$(LIBTRACEEVENT): FORCE
$(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) $(OUTPUT)libtraceevent.a
-libtraceevent_plugins: fixdep FORCE
+libtraceevent_plugins: FORCE
$(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) plugins
$(LIBTRACEEVENT_DYNAMIC_LIST): libtraceevent_plugins
@@ -589,21 +618,21 @@ $(LIBTRACEEVENT)-clean:
install-traceevent-plugins: libtraceevent_plugins
$(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) install_plugins
-$(LIBAPI): fixdep FORCE
+$(LIBAPI): FORCE
$(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) $(OUTPUT)libapi.a
$(LIBAPI)-clean:
$(call QUIET_CLEAN, libapi)
$(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) clean >/dev/null
-$(LIBBPF): fixdep FORCE
+$(LIBBPF): FORCE
$(Q)$(MAKE) -C $(BPF_DIR) O=$(OUTPUT) $(OUTPUT)libbpf.a FEATURES_DUMP=$(FEATURE_DUMP_EXPORT)
$(LIBBPF)-clean:
$(call QUIET_CLEAN, libbpf)
$(Q)$(MAKE) -C $(BPF_DIR) O=$(OUTPUT) clean >/dev/null
-$(LIBSUBCMD): fixdep FORCE
+$(LIBSUBCMD): FORCE
$(Q)$(MAKE) -C $(SUBCMD_DIR) O=$(OUTPUT) $(OUTPUT)libsubcmd.a
$(LIBSUBCMD)-clean:
@@ -811,3 +840,4 @@ FORCE:
.PHONY: $(GIT-HEAD-PHONY) TAGS tags cscope FORCE prepare
.PHONY: libtraceevent_plugins archheaders
+endif # force_fixdep
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 6/7] perf tools: Add non config targets
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
` (4 preceding siblings ...)
2016-12-04 20:42 ` [PATCH 5/7] perf tools: Force fixdep compilation at the start of the build Jiri Olsa
@ 2016-12-04 20:42 ` Jiri Olsa
2016-12-06 8:29 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 7/7] perf tools: Cleanup build directory before each test Jiri Olsa
6 siblings, 1 reply; 16+ messages in thread
From: Jiri Olsa @ 2016-12-04 20:42 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
Adding some missing non config targets that were
for some reason omitted.
Link: http://lkml.kernel.org/n/tip-knevmrvnm2xo63xzm932bjry@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/perf/Makefile.perf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 25d9d6653746..d752b6685e57 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -171,7 +171,7 @@ SUBCMD_DIR = $(srctree)/tools/lib/subcmd/
# non-config cases
config := 1
-NON_CONFIG_TARGETS := clean TAGS tags cscope help install-doc
+NON_CONFIG_TARGETS := clean TAGS tags cscope help install-doc install-man install-html install-info install-pdf doc man html info pdf
ifdef MAKECMDGOALS
ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),)
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 7/7] perf tools: Cleanup build directory before each test
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
` (5 preceding siblings ...)
2016-12-04 20:42 ` [PATCH 6/7] perf tools: Add non config targets Jiri Olsa
@ 2016-12-04 20:42 ` Jiri Olsa
2016-12-06 8:29 ` [tip:perf/core] " tip-bot for Jiri Olsa
6 siblings, 1 reply; 16+ messages in thread
From: Jiri Olsa @ 2016-12-04 20:42 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
Cleanup the fixdep tool before every test.
Link: http://lkml.kernel.org/n/tip-1al4akj7r8pl1pidxgnzzlzs@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/perf/tests/make | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/tests/make b/tools/perf/tests/make
index 08ed7f12cc37..ac6f3ecd4e72 100644
--- a/tools/perf/tests/make
+++ b/tools/perf/tests/make
@@ -278,7 +278,7 @@ endif
MAKEFLAGS := --no-print-directory
-clean := @(cd $(PERF); $(MAKE_F) -s $(O_OPT) clean >/dev/null)
+clean := @(cd $(PERF); $(MAKE_F) -s $(O_OPT) clean >/dev/null && $(MAKE) -s $(O_OPT) -C ../build clean >/dev/null)
$(run):
$(call clean)
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 5/7] perf tools: Force fixdep compilation at the start of the build
2016-12-04 20:42 ` [PATCH 5/7] perf tools: Force fixdep compilation at the start of the build Jiri Olsa
@ 2016-12-05 20:02 ` Arnaldo Carvalho de Melo
2016-12-06 10:47 ` Jiri Olsa
0 siblings, 1 reply; 16+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-05 20:02 UTC (permalink / raw)
To: Jiri Olsa; +Cc: lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
Em Sun, Dec 04, 2016 at 09:42:56PM +0100, Jiri Olsa escreveu:
> The fixdep tool needs to be built before everything else,
> because it fixes every object dependency file.
>
> We handle this currently by making all objects to depend
> on fixdep, which is error prone and is easily forgotten
> when new object is added.
>
> Instead of this, this patch force fixdep tool to be built
> as the first target in the separate make session. This way
> we don't need to handle extra fixdep dependencies and we are
> certain there's no fixdep race with any parallel make job.
With your updated version I'm getting this:
$ make -k O=/tmp/build/perf -C tools/perf install-bin
<BIG SNIP>
LINK /tmp/build/perf/libperf-gtk.so
INSTALL GTK UI
install: cannot change permissions of ‘/lib64’: Operation not permitted
install: cannot create regular file '/lib64/libperf-gtk.so': Permission denied
Makefile.perf:738: recipe for target 'install-gtk' failed
make[2]: *** [install-gtk] Error 1
make[2]: *** Waiting for unfinished jobs....
Makefile.perf:383: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:108: recipe for target 'install-bin' failed
make: *** [install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
> Link: http://lkml.kernel.org/n/tip-b6wi5cssl8apu74o2kbfheag@git.kernel.org
> Signed-off-by: Jiri Olsa <jolsa@kernel.org>
> ---
> tools/perf/Makefile.perf | 54 +++++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 42 insertions(+), 12 deletions(-)
>
> diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
> index 112f4f7bb200..25d9d6653746 100644
> --- a/tools/perf/Makefile.perf
> +++ b/tools/perf/Makefile.perf
> @@ -179,6 +179,27 @@ ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),)
> endif
> endif
>
> +# The fixdep build - we force fixdep tool to be built as
> +# the first target in the separate make session not to be
> +# disturbed by any parallel make jobs. Once fixdep is done
> +# we issue the requested build with FIXDEP=1 variable.
> +#
> +# The fixdep build is disabled for $(NON_CONFIG_TARGETS)
> +# targets, because it's not necessary.
> +
> +ifdef FIXDEP
> + force_fixdep := 0
> +else
> + force_fixdep := $(config)
> +endif
> +
> +# Disable config, we are forcing fixdep rule first
> +# and it does not need config data.
> +
> +ifeq ($(force_fixdep),1)
> + config := 0
> +endif
> +
> # Set FEATURE_TESTS to 'all' so all possible feature checkers are executed.
> # Without this setting the output feature dump file misses some features, for
> # example, liberty. Select all checkers so we won't get an incomplete feature
> @@ -324,10 +345,22 @@ LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group
>
> export INSTALL SHELL_PATH
>
> +export srctree OUTPUT RM CC LD AR CFLAGS V BISON FLEX AWK
> +export HOSTCC HOSTLD HOSTAR
> +include $(srctree)/tools/build/Makefile.include
> +
> ### Build rules
>
> SHELL = $(SHELL_PATH)
>
> +ifeq ($(force_fixdep),1)
> +goals := $(filter-out all sub-make, $(MAKECMDGOALS))
> +
> +$(goals) all: sub-make
> +
> +sub-make: fixdep
> + $(Q)$(MAKE) FIXDEP=1 -f Makefile.perf $(goals)
> +else
> all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
>
> $(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) $(LIBTRACEEVENT_DYNAMIC_LIST)
> @@ -348,10 +381,6 @@ strip: $(PROGRAMS) $(OUTPUT)perf
>
> PERF_IN := $(OUTPUT)perf-in.o
>
> -export srctree OUTPUT RM CC LD AR CFLAGS V BISON FLEX AWK
> -export HOSTCC HOSTLD HOSTAR
> -include $(srctree)/tools/build/Makefile.include
> -
> JEVENTS := $(OUTPUT)pmu-events/jevents
> JEVENTS_IN := $(OUTPUT)pmu-events/jevents-in.o
>
> @@ -470,7 +499,7 @@ $(OUTPUT)perf: $(PERFLIBS) $(PERF_IN) $(PMU_EVENTS_IN) $(LIBTRACEEVENT_DYNAMIC_L
> $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $(LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS) \
> $(PERF_IN) $(PMU_EVENTS_IN) $(LIBS) -o $@
>
> -$(GTK_IN): fixdep FORCE
> +$(GTK_IN): FORCE
> $(Q)$(MAKE) $(build)=gtk
>
> $(OUTPUT)libperf-gtk.so: $(GTK_IN) $(PERFLIBS)
> @@ -515,7 +544,7 @@ endif
> __build-dir = $(subst $(OUTPUT),,$(dir $@))
> build-dir = $(if $(__build-dir),$(__build-dir),.)
>
> -prepare: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h fixdep archheaders
> +prepare: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h archheaders
>
> $(OUTPUT)%.o: %.c prepare FORCE
> $(Q)$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@
> @@ -565,7 +594,7 @@ $(patsubst perf-%,%.o,$(PROGRAMS)): $(wildcard */*.h)
>
> LIBPERF_IN := $(OUTPUT)libperf-in.o
>
> -$(LIBPERF_IN): prepare fixdep FORCE
> +$(LIBPERF_IN): prepare FORCE
> $(Q)$(MAKE) $(build)=libperf
>
> $(LIB_FILE): $(LIBPERF_IN)
> @@ -573,10 +602,10 @@ $(LIB_FILE): $(LIBPERF_IN)
>
> LIBTRACEEVENT_FLAGS += plugin_dir=$(plugindir_SQ)
>
> -$(LIBTRACEEVENT): fixdep FORCE
> +$(LIBTRACEEVENT): FORCE
> $(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) $(OUTPUT)libtraceevent.a
>
> -libtraceevent_plugins: fixdep FORCE
> +libtraceevent_plugins: FORCE
> $(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) plugins
>
> $(LIBTRACEEVENT_DYNAMIC_LIST): libtraceevent_plugins
> @@ -589,21 +618,21 @@ $(LIBTRACEEVENT)-clean:
> install-traceevent-plugins: libtraceevent_plugins
> $(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) install_plugins
>
> -$(LIBAPI): fixdep FORCE
> +$(LIBAPI): FORCE
> $(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) $(OUTPUT)libapi.a
>
> $(LIBAPI)-clean:
> $(call QUIET_CLEAN, libapi)
> $(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) clean >/dev/null
>
> -$(LIBBPF): fixdep FORCE
> +$(LIBBPF): FORCE
> $(Q)$(MAKE) -C $(BPF_DIR) O=$(OUTPUT) $(OUTPUT)libbpf.a FEATURES_DUMP=$(FEATURE_DUMP_EXPORT)
>
> $(LIBBPF)-clean:
> $(call QUIET_CLEAN, libbpf)
> $(Q)$(MAKE) -C $(BPF_DIR) O=$(OUTPUT) clean >/dev/null
>
> -$(LIBSUBCMD): fixdep FORCE
> +$(LIBSUBCMD): FORCE
> $(Q)$(MAKE) -C $(SUBCMD_DIR) O=$(OUTPUT) $(OUTPUT)libsubcmd.a
>
> $(LIBSUBCMD)-clean:
> @@ -811,3 +840,4 @@ FORCE:
> .PHONY: $(GIT-HEAD-PHONY) TAGS tags cscope FORCE prepare
> .PHONY: libtraceevent_plugins archheaders
>
> +endif # force_fixdep
> --
> 2.7.4
^ permalink raw reply [flat|nested] 16+ messages in thread
* [tip:perf/core] tools build: Make the .cmd file more readable
2016-12-04 20:42 ` [PATCH 1/7] tools build: Make the .cmd file more readable Jiri Olsa
@ 2016-12-06 8:27 ` tip-bot for Jiri Olsa
0 siblings, 0 replies; 16+ messages in thread
From: tip-bot for Jiri Olsa @ 2016-12-06 8:27 UTC (permalink / raw)
To: linux-tip-commits
Cc: namhyung, tglx, hpa, jolsa, linux-kernel, acme, dsahern, mingo,
a.p.zijlstra
Commit-ID: a5ba0a1a5af312c4b4bfe78dc054d832103ec27d
Gitweb: http://git.kernel.org/tip/a5ba0a1a5af312c4b4bfe78dc054d832103ec27d
Author: Jiri Olsa <jolsa@kernel.org>
AuthorDate: Sun, 4 Dec 2016 21:42:52 +0100
Committer: Arnaldo Carvalho de Melo <acme@redhat.com>
CommitDate: Mon, 5 Dec 2016 16:04:08 -0300
tools build: Make the .cmd file more readable
Putting extra line between dependencies and cmd_* definition
to make it more readable.
Before:
$ cat .builtin-top.o.cmd
...
/home/jolsa/kernel/linux-perf/tools/include/linux/stringify.h \
/home/jolsa/kernel/linux-perf/tools/include/linux/time64.h
cmd_builtin-top.o := gcc -Wp,-MD,./.builtin-top.o.d -Wp,-MT,builtin-...
...
After:
$ cat .builtin-top.o.cmd
...
/home/jolsa/kernel/linux-perf/tools/include/linux/stringify.h \
/home/jolsa/kernel/linux-perf/tools/include/linux/time64.h
cmd_builtin-top.o := gcc -Wp,-MD,./.builtin-top.o.d -Wp,-MT,builtin-...
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/build/Build.include | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/build/Build.include b/tools/build/Build.include
index 62dcf0c..475152c 100644
--- a/tools/build/Build.include
+++ b/tools/build/Build.include
@@ -65,7 +65,7 @@ dep-cmd = $(if $(wildcard $(fixdep)),
printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \
printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \
cat $(depfile) >> $(dot-target).cmd; \
- printf '%s\n' 'cmd_$@ := $(make-cmd)' >> $(dot-target).cmd)
+ printf '\n%s\n' 'cmd_$@ := $(make-cmd)' >> $(dot-target).cmd)
###
# if_changed_dep - execute command if any prerequisite is newer than
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [tip:perf/core] tools build: Move tabs to spaces where suitable
2016-12-04 20:42 ` [PATCH 2/7] tools build: Move tabs to spaces where suitable Jiri Olsa
@ 2016-12-06 8:27 ` tip-bot for Jiri Olsa
0 siblings, 0 replies; 16+ messages in thread
From: tip-bot for Jiri Olsa @ 2016-12-06 8:27 UTC (permalink / raw)
To: linux-tip-commits
Cc: a.p.zijlstra, namhyung, acme, hpa, mingo, jolsa, dsahern,
linux-kernel, tglx
Commit-ID: 2fedf79b69cf05b7e8e82a42d749c621155dd812
Gitweb: http://git.kernel.org/tip/2fedf79b69cf05b7e8e82a42d749c621155dd812
Author: Jiri Olsa <jolsa@kernel.org>
AuthorDate: Sun, 4 Dec 2016 21:42:53 +0100
Committer: Arnaldo Carvalho de Melo <acme@redhat.com>
CommitDate: Mon, 5 Dec 2016 16:06:03 -0300
tools build: Move tabs to spaces where suitable
We've been hit several times by a Makefile bug where line indented by
tab was falsely considered as target command.
We prevent this by always using space indentation for everything except
for the target commands.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/build/Build.include | 12 ++--
tools/build/Makefile.feature | 138 +++++++++++++++++++++----------------------
tools/build/feature/Makefile | 102 ++++++++++++++++----------------
3 files changed, 126 insertions(+), 126 deletions(-)
diff --git a/tools/build/Build.include b/tools/build/Build.include
index 475152c..418871d 100644
--- a/tools/build/Build.include
+++ b/tools/build/Build.include
@@ -72,15 +72,15 @@ dep-cmd = $(if $(wildcard $(fixdep)),
# target, or command line has changed and update
# dependencies in the cmd file
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check)), \
- @set -e; \
- $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
+ @set -e; \
+ $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
# if_changed - execute command if any prerequisite is newer than
# target, or command line has changed
-if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
- @set -e; \
- $(echo-cmd) $(cmd_$(1)); \
- printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
+ @set -e; \
+ $(echo-cmd) $(cmd_$(1)); \
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
###
# C flags to be used in rule definitions, includes:
diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
index ae52e02..e3fb5ec 100644
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -27,58 +27,58 @@ endef
# the rule that uses them - an example for that is the 'bionic'
# feature check. ]
#
-FEATURE_TESTS_BASIC := \
- backtrace \
- dwarf \
- dwarf_getlocations \
- fortify-source \
- sync-compare-and-swap \
- glibc \
- gtk2 \
- gtk2-infobar \
- libaudit \
- libbfd \
- libelf \
- libelf-getphdrnum \
- libelf-gelf_getnote \
- libelf-getshdrstrndx \
- libelf-mmap \
- libnuma \
- numa_num_possible_cpus \
- libperl \
- libpython \
- libpython-version \
- libslang \
- libcrypto \
- libunwind \
- libunwind-x86 \
- libunwind-x86_64 \
- libunwind-arm \
- libunwind-aarch64 \
- pthread-attr-setaffinity-np \
- stackprotector-all \
- timerfd \
- libdw-dwarf-unwind \
- zlib \
- lzma \
- get_cpuid \
- bpf \
- sdt
+FEATURE_TESTS_BASIC := \
+ backtrace \
+ dwarf \
+ dwarf_getlocations \
+ fortify-source \
+ sync-compare-and-swap \
+ glibc \
+ gtk2 \
+ gtk2-infobar \
+ libaudit \
+ libbfd \
+ libelf \
+ libelf-getphdrnum \
+ libelf-gelf_getnote \
+ libelf-getshdrstrndx \
+ libelf-mmap \
+ libnuma \
+ numa_num_possible_cpus \
+ libperl \
+ libpython \
+ libpython-version \
+ libslang \
+ libcrypto \
+ libunwind \
+ libunwind-x86 \
+ libunwind-x86_64 \
+ libunwind-arm \
+ libunwind-aarch64 \
+ pthread-attr-setaffinity-np \
+ stackprotector-all \
+ timerfd \
+ libdw-dwarf-unwind \
+ zlib \
+ lzma \
+ get_cpuid \
+ bpf \
+ sdt
# FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list
# of all feature tests
-FEATURE_TESTS_EXTRA := \
- bionic \
- compile-32 \
- compile-x32 \
- cplus-demangle \
- hello \
- libbabeltrace \
- liberty \
- liberty-z \
- libunwind-debug-frame \
- libunwind-debug-frame-arm \
- libunwind-debug-frame-aarch64
+FEATURE_TESTS_EXTRA := \
+ bionic \
+ compile-32 \
+ compile-x32 \
+ cplus-demangle \
+ hello \
+ libbabeltrace \
+ liberty \
+ liberty-z \
+ libunwind-debug-frame \
+ libunwind-debug-frame-arm \
+ libunwind-debug-frame-aarch64
FEATURE_TESTS ?= $(FEATURE_TESTS_BASIC)
@@ -86,26 +86,26 @@ ifeq ($(FEATURE_TESTS),all)
FEATURE_TESTS := $(FEATURE_TESTS_BASIC) $(FEATURE_TESTS_EXTRA)
endif
-FEATURE_DISPLAY ?= \
- dwarf \
- dwarf_getlocations \
- glibc \
- gtk2 \
- libaudit \
- libbfd \
- libelf \
- libnuma \
- numa_num_possible_cpus \
- libperl \
- libpython \
- libslang \
- libcrypto \
- libunwind \
- libdw-dwarf-unwind \
- zlib \
- lzma \
- get_cpuid \
- bpf
+FEATURE_DISPLAY ?= \
+ dwarf \
+ dwarf_getlocations \
+ glibc \
+ gtk2 \
+ libaudit \
+ libbfd \
+ libelf \
+ libnuma \
+ numa_num_possible_cpus \
+ libperl \
+ libpython \
+ libslang \
+ libcrypto \
+ libunwind \
+ libdw-dwarf-unwind \
+ zlib \
+ lzma \
+ get_cpuid \
+ bpf
# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index 871d553..303196c 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -1,54 +1,54 @@
-FILES= \
- test-all.bin \
- test-backtrace.bin \
- test-bionic.bin \
- test-dwarf.bin \
- test-dwarf_getlocations.bin \
- test-fortify-source.bin \
- test-sync-compare-and-swap.bin \
- test-glibc.bin \
- test-gtk2.bin \
- test-gtk2-infobar.bin \
- test-hello.bin \
- test-libaudit.bin \
- test-libbfd.bin \
- test-liberty.bin \
- test-liberty-z.bin \
- test-cplus-demangle.bin \
- test-libelf.bin \
- test-libelf-getphdrnum.bin \
- test-libelf-gelf_getnote.bin \
- test-libelf-getshdrstrndx.bin \
- test-libelf-mmap.bin \
- test-libnuma.bin \
- test-numa_num_possible_cpus.bin \
- test-libperl.bin \
- test-libpython.bin \
- test-libpython-version.bin \
- test-libslang.bin \
- test-libcrypto.bin \
- test-libunwind.bin \
- test-libunwind-debug-frame.bin \
- test-libunwind-x86.bin \
- test-libunwind-x86_64.bin \
- test-libunwind-arm.bin \
- test-libunwind-aarch64.bin \
- test-libunwind-debug-frame-arm.bin \
- test-libunwind-debug-frame-aarch64.bin \
- test-pthread-attr-setaffinity-np.bin \
- test-stackprotector-all.bin \
- test-timerfd.bin \
- test-libdw-dwarf-unwind.bin \
- test-libbabeltrace.bin \
- test-compile-32.bin \
- test-compile-x32.bin \
- test-zlib.bin \
- test-lzma.bin \
- test-bpf.bin \
- test-get_cpuid.bin \
- test-sdt.bin \
- test-cxx.bin \
- test-jvmti.bin
+FILES= \
+ test-all.bin \
+ test-backtrace.bin \
+ test-bionic.bin \
+ test-dwarf.bin \
+ test-dwarf_getlocations.bin \
+ test-fortify-source.bin \
+ test-sync-compare-and-swap.bin \
+ test-glibc.bin \
+ test-gtk2.bin \
+ test-gtk2-infobar.bin \
+ test-hello.bin \
+ test-libaudit.bin \
+ test-libbfd.bin \
+ test-liberty.bin \
+ test-liberty-z.bin \
+ test-cplus-demangle.bin \
+ test-libelf.bin \
+ test-libelf-getphdrnum.bin \
+ test-libelf-gelf_getnote.bin \
+ test-libelf-getshdrstrndx.bin \
+ test-libelf-mmap.bin \
+ test-libnuma.bin \
+ test-numa_num_possible_cpus.bin \
+ test-libperl.bin \
+ test-libpython.bin \
+ test-libpython-version.bin \
+ test-libslang.bin \
+ test-libcrypto.bin \
+ test-libunwind.bin \
+ test-libunwind-debug-frame.bin \
+ test-libunwind-x86.bin \
+ test-libunwind-x86_64.bin \
+ test-libunwind-arm.bin \
+ test-libunwind-aarch64.bin \
+ test-libunwind-debug-frame-arm.bin \
+ test-libunwind-debug-frame-aarch64.bin \
+ test-pthread-attr-setaffinity-np.bin \
+ test-stackprotector-all.bin \
+ test-timerfd.bin \
+ test-libdw-dwarf-unwind.bin \
+ test-libbabeltrace.bin \
+ test-compile-32.bin \
+ test-compile-x32.bin \
+ test-zlib.bin \
+ test-lzma.bin \
+ test-bpf.bin \
+ test-get_cpuid.bin \
+ test-sdt.bin \
+ test-cxx.bin \
+ test-jvmti.bin
FILES := $(addprefix $(OUTPUT),$(FILES))
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [tip:perf/core] perf tools: Move install-gtk target into rules area
2016-12-04 20:42 ` [PATCH 3/7] perf tools: Move install-gtk target into rules area Jiri Olsa
@ 2016-12-06 8:28 ` tip-bot for Jiri Olsa
0 siblings, 0 replies; 16+ messages in thread
From: tip-bot for Jiri Olsa @ 2016-12-06 8:28 UTC (permalink / raw)
To: linux-tip-commits
Cc: tglx, hpa, a.p.zijlstra, mingo, dsahern, jolsa, linux-kernel,
acme, namhyung
Commit-ID: 5c319a67b13da8323ec7bdb8d2ea729eb8a20735
Gitweb: http://git.kernel.org/tip/5c319a67b13da8323ec7bdb8d2ea729eb8a20735
Author: Jiri Olsa <jolsa@kernel.org>
AuthorDate: Sun, 4 Dec 2016 21:42:54 +0100
Committer: Arnaldo Carvalho de Melo <acme@redhat.com>
CommitDate: Mon, 5 Dec 2016 16:06:50 -0300
perf tools: Move install-gtk target into rules area
The upcoming fixdep fix needs all targets at the same area, so they'll
fit under a signal condition block.
Move install-gtk target into the rules section.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/Makefile.perf | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index dfb20dd..593d765 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -331,11 +331,6 @@ endif
ifndef NO_GTK2
ALL_PROGRAMS += $(OUTPUT)libperf-gtk.so
GTK_IN := $(OUTPUT)gtk-in.o
-
-install-gtk: $(OUTPUT)libperf-gtk.so
- $(call QUIET_INSTALL, 'GTK UI') \
- $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(libdir_SQ)'; \
- $(INSTALL) $(OUTPUT)libperf-gtk.so '$(DESTDIR_SQ)$(libdir_SQ)'
endif
ifdef ASCIIDOC8
@@ -712,7 +707,14 @@ check: $(OUTPUT)common-cmds.h
### Installation rules
+ifndef NO_GTK2
+install-gtk: $(OUTPUT)libperf-gtk.so
+ $(call QUIET_INSTALL, 'GTK UI') \
+ $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(libdir_SQ)'; \
+ $(INSTALL) $(OUTPUT)libperf-gtk.so '$(DESTDIR_SQ)$(libdir_SQ)'
+else
install-gtk:
+endif
install-tools: all install-gtk
$(call QUIET_INSTALL, binaries) \
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [tip:perf/core] perf tools: Move python/perf.so target into rules area
2016-12-04 20:42 ` [PATCH 4/7] perf tools: Move python/perf.so " Jiri Olsa
@ 2016-12-06 8:28 ` tip-bot for Jiri Olsa
0 siblings, 0 replies; 16+ messages in thread
From: tip-bot for Jiri Olsa @ 2016-12-06 8:28 UTC (permalink / raw)
To: linux-tip-commits
Cc: dsahern, tglx, hpa, jolsa, a.p.zijlstra, linux-kernel, mingo,
acme, namhyung
Commit-ID: 0b4d4b076251542dc81d128f481c3d3b5fc24863
Gitweb: http://git.kernel.org/tip/0b4d4b076251542dc81d128f481c3d3b5fc24863
Author: Jiri Olsa <jolsa@kernel.org>
AuthorDate: Sun, 4 Dec 2016 21:42:55 +0100
Committer: Arnaldo Carvalho de Melo <acme@redhat.com>
CommitDate: Mon, 5 Dec 2016 16:11:50 -0300
perf tools: Move python/perf.so target into rules area
Following fixdep fix needs all targets at the same area, so they'll fit
under signal condition block.
Moving python/perf.so target into rules section and intentionally
removing the perl script related comment.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/Makefile.perf | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 593d765..2784b58 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -268,17 +268,6 @@ python-clean := $(call QUIET_CLEAN, python) $(RM) -r $(PYTHON_EXTBUILD) $(OUTPUT
PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources)
PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py $(LIBTRACEEVENT) $(LIBAPI)
-$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) $(LIBTRACEEVENT_DYNAMIC_LIST)
- $(QUIET_GEN)LDSHARED="$(CC) -pthread -shared" \
- CFLAGS='$(CFLAGS)' LDFLAGS='$(LDFLAGS) $(LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS)' \
- $(PYTHON_WORD) util/setup.py \
- --quiet build_ext; \
- mkdir -p $(OUTPUT)python && \
- cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/
-#
-# No Perl scripts right now:
-#
-
SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH))
PROGRAMS += $(OUTPUT)perf
@@ -362,6 +351,14 @@ SHELL = $(SHELL_PATH)
all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
+$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) $(LIBTRACEEVENT_DYNAMIC_LIST)
+ $(QUIET_GEN)LDSHARED="$(CC) -pthread -shared" \
+ CFLAGS='$(CFLAGS)' LDFLAGS='$(LDFLAGS) $(LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS)' \
+ $(PYTHON_WORD) util/setup.py \
+ --quiet build_ext; \
+ mkdir -p $(OUTPUT)python && \
+ cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/
+
please_set_SHELL_PATH_to_a_more_modern_shell:
$(Q)$$(:)
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [tip:perf/core] perf tools: Cleanup build directory before each test
2016-12-04 20:42 ` [PATCH 7/7] perf tools: Cleanup build directory before each test Jiri Olsa
@ 2016-12-06 8:29 ` tip-bot for Jiri Olsa
0 siblings, 0 replies; 16+ messages in thread
From: tip-bot for Jiri Olsa @ 2016-12-06 8:29 UTC (permalink / raw)
To: linux-tip-commits
Cc: hpa, jolsa, mingo, dsahern, acme, linux-kernel, tglx,
a.p.zijlstra, namhyung
Commit-ID: 207da4739e3e6ced6dbfebed7416b35c0440e591
Gitweb: http://git.kernel.org/tip/207da4739e3e6ced6dbfebed7416b35c0440e591
Author: Jiri Olsa <jolsa@kernel.org>
AuthorDate: Sun, 4 Dec 2016 21:42:58 +0100
Committer: Arnaldo Carvalho de Melo <acme@redhat.com>
CommitDate: Mon, 5 Dec 2016 16:18:26 -0300
perf tools: Cleanup build directory before each test
Cleanup the fixdep tool before every test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/tests/make | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/tests/make b/tools/perf/tests/make
index aa49b66..0784748 100644
--- a/tools/perf/tests/make
+++ b/tools/perf/tests/make
@@ -280,7 +280,7 @@ endif
MAKEFLAGS := --no-print-directory
-clean := @(cd $(PERF); $(MAKE_F) -s $(O_OPT) clean >/dev/null)
+clean := @(cd $(PERF); $(MAKE_F) -s $(O_OPT) clean >/dev/null && $(MAKE) -s $(O_OPT) -C ../build clean >/dev/null)
$(run):
$(call clean)
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [tip:perf/core] perf tools: Add non config targets
2016-12-04 20:42 ` [PATCH 6/7] perf tools: Add non config targets Jiri Olsa
@ 2016-12-06 8:29 ` tip-bot for Jiri Olsa
0 siblings, 0 replies; 16+ messages in thread
From: tip-bot for Jiri Olsa @ 2016-12-06 8:29 UTC (permalink / raw)
To: linux-tip-commits
Cc: tglx, acme, linux-kernel, jolsa, a.p.zijlstra, hpa, namhyung,
mingo, dsahern
Commit-ID: d4dcadec43def7b2a4a4c1cae7d727c17d2f25c5
Gitweb: http://git.kernel.org/tip/d4dcadec43def7b2a4a4c1cae7d727c17d2f25c5
Author: Jiri Olsa <jolsa@kernel.org>
AuthorDate: Sun, 4 Dec 2016 21:42:57 +0100
Committer: Arnaldo Carvalho de Melo <acme@redhat.com>
CommitDate: Mon, 5 Dec 2016 16:18:49 -0300
perf tools: Add non config targets
Adding some missing non config targets that were for some reason
omitted.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/Makefile.perf | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 2784b58..10495c9 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -177,7 +177,7 @@ SUBCMD_DIR = $(srctree)/tools/lib/subcmd/
# non-config cases
config := 1
-NON_CONFIG_TARGETS := clean TAGS tags cscope help install-doc
+NON_CONFIG_TARGETS := clean TAGS tags cscope help install-doc install-man install-html install-info install-pdf doc man html info pdf
ifdef MAKECMDGOALS
ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),)
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 5/7] perf tools: Force fixdep compilation at the start of the build
2016-12-05 20:02 ` Arnaldo Carvalho de Melo
@ 2016-12-06 10:47 ` Jiri Olsa
0 siblings, 0 replies; 16+ messages in thread
From: Jiri Olsa @ 2016-12-06 10:47 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: Jiri Olsa, lkml, Ingo Molnar, Peter Zijlstra, Namhyung Kim, David Ahern
On Mon, Dec 05, 2016 at 05:02:51PM -0300, Arnaldo Carvalho de Melo wrote:
> Em Sun, Dec 04, 2016 at 09:42:56PM +0100, Jiri Olsa escreveu:
> > The fixdep tool needs to be built before everything else,
> > because it fixes every object dependency file.
> >
> > We handle this currently by making all objects to depend
> > on fixdep, which is error prone and is easily forgotten
> > when new object is added.
> >
> > Instead of this, this patch force fixdep tool to be built
> > as the first target in the separate make session. This way
> > we don't need to handle extra fixdep dependencies and we are
> > certain there's no fixdep race with any parallel make job.
>
> With your updated version I'm getting this:
>
> $ make -k O=/tmp/build/perf -C tools/perf install-bin
> <BIG SNIP>
> LINK /tmp/build/perf/libperf-gtk.so
> INSTALL GTK UI
> install: cannot change permissions of ‘/lib64’: Operation not permitted
> install: cannot create regular file '/lib64/libperf-gtk.so': Permission denied
> Makefile.perf:738: recipe for target 'install-gtk' failed
> make[2]: *** [install-gtk] Error 1
> make[2]: *** Waiting for unfinished jobs....
> Makefile.perf:383: recipe for target 'sub-make' failed
> make[1]: *** [sub-make] Error 2
> Makefile:108: recipe for target 'install-bin' failed
> make: *** [install-bin] Error 2
> make: Leaving directory '/home/acme/git/linux/tools/perf'
hum, tests/make does not cover $HOME installation :-\
anyway, I needed to do more changes and I pushed them all
into my perf/fixes again and now I'm running all tests..
it also has the check-headers.sh fix we discussed
I'll post later today if the tests are ok
thanks,
jirka
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2016-12-06 10:48 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
2016-12-04 20:42 ` [PATCH 1/7] tools build: Make the .cmd file more readable Jiri Olsa
2016-12-06 8:27 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 2/7] tools build: Move tabs to spaces where suitable Jiri Olsa
2016-12-06 8:27 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 3/7] perf tools: Move install-gtk target into rules area Jiri Olsa
2016-12-06 8:28 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 4/7] perf tools: Move python/perf.so " Jiri Olsa
2016-12-06 8:28 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 5/7] perf tools: Force fixdep compilation at the start of the build Jiri Olsa
2016-12-05 20:02 ` Arnaldo Carvalho de Melo
2016-12-06 10:47 ` Jiri Olsa
2016-12-04 20:42 ` [PATCH 6/7] perf tools: Add non config targets Jiri Olsa
2016-12-06 8:29 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 7/7] perf tools: Cleanup build directory before each test Jiri Olsa
2016-12-06 8:29 ` [tip:perf/core] " tip-bot for Jiri Olsa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).