From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752772AbcLGMmL (ORCPT ); Wed, 7 Dec 2016 07:42:11 -0500 Received: from bastet.se.axis.com ([195.60.68.11]:36808 "EHLO bastet.se.axis.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752287AbcLGMmF (ORCPT ); Wed, 7 Dec 2016 07:42:05 -0500 From: Niklas Cassel To: Rob Herring , Mark Rutland , "David S. Miller" , Giuseppe CAVALLARO , Alexandre TORGUE , Phil Reid , Eric Engestrom , Niklas Cassel CC: , , Subject: [RESEND PATCH 1/3] bindings: net: stmmac: correct note about TSO Date: Wed, 7 Dec 2016 13:41:06 +0100 Message-ID: <1481114469-4788-1-git-send-email-niklass@axis.com> X-Mailer: git-send-email 2.1.4 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.0.5.60] X-ClientProxiedBy: XBOX03.axis.com (10.0.5.17) To XBOX02.axis.com (10.0.5.16) X-TM-AS-GCONF: 00 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Niklas Cassel snps,tso was previously placed under AXI BUS Mode parameters, suggesting that the property should be in the stmmac-axi-config node. TSO (TCP Segmentation Offloading) has nothing to do with AXI BUS Mode parameters, and the parser actually expects it to be in the root node, not in the stmmac-axi-config. Also added a note about snps,tso only being available on GMAC4 and newer. Signed-off-by: Niklas Cassel Acked-by: Alexandre TORGUE Acked-by: Rob Herring Acked-by: Giuseppe Cavallaro --- Documentation/devicetree/bindings/net/stmmac.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 41b49e6075f5..b95ff998ba73 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -1,7 +1,7 @@ * STMicroelectronics 10/100/1000 Ethernet driver (GMAC) Required properties: -- compatible: Should be "snps,dwmac-" "snps,dwmac" +- compatible: Should be "snps,dwmac-", "snps,dwmac" For backwards compatibility: "st,spear600-gmac" is also supported. - reg: Address and length of the register set for the device - interrupt-parent: Should be the phandle for the interrupt controller @@ -50,6 +50,8 @@ Optional properties: - snps,ps-speed: port selection speed that can be passed to the core when PCS is supported. For example, this is used in case of SGMII and MAC2MAC connection. +- snps,tso: this enables the TSO feature otherwise it will be managed by + MAC HW capability register. Only for GMAC4 and newer. - AXI BUS Mode parameters: below the list of all the parameters to program the AXI register inside the DMA module: - snps,lpi_en: enable Low Power Interface @@ -62,8 +64,6 @@ Optional properties: - snps,fb: fixed-burst - snps,mb: mixed-burst - snps,rb: rebuild INCRx Burst - - snps,tso: this enables the TSO feature otherwise it will be managed by - MAC HW capability register. - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. Examples: -- 2.1.4