From: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com>
To: johan@kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw,
peter_hong@fintek.com.tw, hpeter+linux_kernel@gmail.com
Subject: [PATCH V1 1/2] usb:serial: Implement Fintek F81232 break on/off
Date: Fri, 9 Dec 2016 13:39:33 +0800 [thread overview]
Message-ID: <1481261974-10914-2-git-send-email-hpeter+linux_kernel@gmail.com> (raw)
In-Reply-To: <1481261974-10914-1-git-send-email-hpeter+linux_kernel@gmail.com>
Implement Fintek F81232 break on/off with LCR register,
it's the same with 16550A LCR register layout.
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
---
drivers/usb/serial/f81232.c | 40 ++++++++++++++++++++++++++++++++++------
1 file changed, 34 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 972f5a5..d45a70e 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -131,6 +131,21 @@ static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
return status;
}
+static int f81232_set_mask_register(struct usb_serial_port *port, u16 reg,
+ u8 mask, u8 val)
+{
+ int status;
+ u8 tmp;
+
+ status = f81232_get_register(port, reg, &tmp);
+ if (status)
+ return status;
+
+ tmp = (tmp & ~mask) | (val & mask);
+
+ return f81232_set_register(port, reg, tmp);
+}
+
static void f81232_read_msr(struct usb_serial_port *port)
{
int status;
@@ -335,15 +350,27 @@ static void f81232_process_read_urb(struct urb *urb)
tty_flip_buffer_push(&port->port);
}
+static void f81232_set_break(struct usb_serial_port *port, bool enable)
+{
+ int status;
+ u8 tmp = 0;
+
+ if (enable)
+ tmp = UART_LCR_SBC;
+
+ status = f81232_set_mask_register(port, LINE_CONTROL_REGISTER,
+ UART_LCR_SBC, tmp);
+ if (status) {
+ dev_err(&port->dev, "%s: set break failed: %x\n", __func__,
+ status);
+ }
+}
+
static void f81232_break_ctl(struct tty_struct *tty, int break_state)
{
- /* FIXME - Stubbed out for now */
+ struct usb_serial_port *port = tty->driver_data;
- /*
- * break_state = -1 to turn on break, and 0 to turn off break
- * see drivers/char/tty_io.c to see it used.
- * last_set_data_urb_value NEVER has the break bit set in it.
- */
+ f81232_set_break(port, break_state);
}
static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
@@ -563,6 +590,7 @@ static void f81232_close(struct usb_serial_port *port)
f81232_port_disable(port);
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
+ f81232_set_break(port, false);
}
static void f81232_dtr_rts(struct usb_serial_port *port, int on)
--
1.9.1
next prev parent reply other threads:[~2016-12-09 5:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-09 5:39 [PATCH V1 0/2] Implement break control for F81232/F81534 Ji-Ze Hong (Peter Hong)
2016-12-09 5:39 ` Ji-Ze Hong (Peter Hong) [this message]
2017-01-09 15:14 ` [PATCH V1 1/2] usb:serial: Implement Fintek F81232 break on/off Johan Hovold
2016-12-09 5:39 ` [PATCH V1 2/2] usb:serial: Implement Fintek f81534 " Ji-Ze Hong (Peter Hong)
2017-01-09 15:21 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481261974-10914-2-git-send-email-hpeter+linux_kernel@gmail.com \
--to=hpeter@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hpeter+linux_kernel@gmail.com \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter_hong@fintek.com.tw \
--cc=tom_tsai@fintek.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).