From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S941201AbcLMSO2 (ORCPT <rfc822;w@1wt.eu>);
        Tue, 13 Dec 2016 13:14:28 -0500
Received: from mail-pg0-f52.google.com ([74.125.83.52]:35083 "EHLO
        mail-pg0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S965018AbcLMSOJ (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Tue, 13 Dec 2016 13:14:09 -0500
From: Jon Mason <jon.mason@broadcom.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
        Florian Fainelli <f.fainelli@gmail.com>
Cc: devicetree@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/7] ARM: dts: NSP: Add BCM958625K switch ports
Date: Tue, 13 Dec 2016 13:13:48 -0500
Message-Id: <1481652831-2744-5-git-send-email-jon.mason@broadcom.com>
X-Mailer: git-send-email 2.7.4
In-Reply-To: <1481652831-2744-1-git-send-email-jon.mason@broadcom.com>
References: <1481652831-2744-1-git-send-email-jon.mason@broadcom.com>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Add the layout of the switch ports found on the BCM958625K reference
board. The CPU port is hooked up to the AMAC0 Ethernet controller
adapter.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
 arch/arm/boot/dts/bcm958625k.dts | 45 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index dc24056..7aa86c7 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -120,6 +120,51 @@
 	};
 };
 
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
 &qspi {
 	bspi-sel = <0>;
 	flash: m25p80@0 {
-- 
2.7.4