linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ross Zwisler <ross.zwisler@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>,
	Alexander Viro <viro@zeniv.linux.org.uk>,
	Andrew Morton <akpm@linux-foundation.org>,
	Christoph Hellwig <hch@lst.de>,
	Dan Williams <dan.j.williams@intel.com>,
	Dave Chinner <david@fromorbit.com>,
	Dave Hansen <dave.hansen@intel.com>, Jan Kara <jack@suse.cz>,
	Matthew Wilcox <mawilcox@microsoft.com>,
	linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
	linux-nvdimm@ml01.01.org
Subject: [PATCH 2/2] dax: wrprotect pmd_t in dax_mapping_entry_mkclean
Date: Tue, 20 Dec 2016 15:23:06 -0700	[thread overview]
Message-ID: <1482272586-21177-3-git-send-email-ross.zwisler@linux.intel.com> (raw)
In-Reply-To: <1482272586-21177-1-git-send-email-ross.zwisler@linux.intel.com>

Currently dax_mapping_entry_mkclean() fails to clean and write protect the
pmd_t of a DAX PMD entry during an *sync operation.  This can result in
data loss in the following sequence:

1) mmap write to DAX PMD, dirtying PMD radix tree entry and making the
   pmd_t dirty and writeable
2) fsync, flushing out PMD data and cleaning the radix tree entry. We
   currently fail to mark the pmd_t as clean and write protected.
3) more mmap writes to the PMD.  These don't cause any page faults since
   the pmd_t is dirty and writeable.  The radix tree entry remains clean.
4) fsync, which fails to flush the dirty PMD data because the radix tree
   entry was clean.
5) crash - dirty data that should have been fsync'd as part of 4) could
   still have been in the processor cache, and is lost.

Fix this by marking the pmd_t clean and write protected in
dax_mapping_entry_mkclean(), which is called as part of the fsync
operation 2).  This will cause the writes in step 3) above to generate page
faults where we'll re-dirty the PMD radix tree entry, resulting in flushes
in the fsync that happens in step 4).

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Fixes: 4b4bb46d00b3 ("dax: clear dirty entry tags on cache flush")
---
 fs/dax.c           | 51 ++++++++++++++++++++++++++++++++++++---------------
 include/linux/mm.h |  2 --
 mm/memory.c        |  4 ++--
 3 files changed, 38 insertions(+), 19 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 5c74f60..ddcddfe 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -691,8 +691,8 @@ static void dax_mapping_entry_mkclean(struct address_space *mapping,
 				      pgoff_t index, unsigned long pfn)
 {
 	struct vm_area_struct *vma;
-	pte_t *ptep;
-	pte_t pte;
+	pte_t pte, *ptep = NULL;
+	pmd_t *pmdp = NULL;
 	spinlock_t *ptl;
 	bool changed;
 
@@ -707,21 +707,42 @@ static void dax_mapping_entry_mkclean(struct address_space *mapping,
 
 		address = pgoff_address(index, vma);
 		changed = false;
-		if (follow_pte(vma->vm_mm, address, &ptep, &ptl))
+		if (follow_pte_pmd(vma->vm_mm, address, &ptep, &pmdp, &ptl))
 			continue;
-		if (pfn != pte_pfn(*ptep))
-			goto unlock;
-		if (!pte_dirty(*ptep) && !pte_write(*ptep))
-			goto unlock;
 
-		flush_cache_page(vma, address, pfn);
-		pte = ptep_clear_flush(vma, address, ptep);
-		pte = pte_wrprotect(pte);
-		pte = pte_mkclean(pte);
-		set_pte_at(vma->vm_mm, address, ptep, pte);
-		changed = true;
-unlock:
-		pte_unmap_unlock(ptep, ptl);
+		if (pmdp) {
+#ifdef CONFIG_FS_DAX_PMD
+			pmd_t pmd;
+
+			if (pfn != pmd_pfn(*pmdp))
+				goto unlock_pmd;
+			if (!pmd_dirty(*pmdp) && !pmd_write(*pmdp))
+				goto unlock_pmd;
+
+			flush_cache_page(vma, address, pfn);
+			pmd = pmdp_huge_clear_flush(vma, address, pmdp);
+			pmd = pmd_wrprotect(pmd);
+			pmd = pmd_mkclean(pmd);
+			set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+			changed = true;
+unlock_pmd:
+			spin_unlock(ptl);
+#endif
+		} else {
+			if (pfn != pte_pfn(*ptep))
+				goto unlock_pte;
+			if (!pte_dirty(*ptep) && !pte_write(*ptep))
+				goto unlock_pte;
+
+			flush_cache_page(vma, address, pfn);
+			pte = ptep_clear_flush(vma, address, ptep);
+			pte = pte_wrprotect(pte);
+			pte = pte_mkclean(pte);
+			set_pte_at(vma->vm_mm, address, ptep, pte);
+			changed = true;
+unlock_pte:
+			pte_unmap_unlock(ptep, ptl);
+		}
 
 		if (changed)
 			mmu_notifier_invalidate_page(vma->vm_mm, address);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index ff0e1c1..f4de7fa 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1210,8 +1210,6 @@ int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
 			struct vm_area_struct *vma);
 void unmap_mapping_range(struct address_space *mapping,
 		loff_t const holebegin, loff_t const holelen, int even_cows);
-int follow_pte(struct mm_struct *mm, unsigned long address, pte_t **ptepp,
-	       spinlock_t **ptlp);
 int follow_pte_pmd(struct mm_struct *mm, unsigned long address,
 			     pte_t **ptepp, pmd_t **pmdpp, spinlock_t **ptlp);
 int follow_pfn(struct vm_area_struct *vma, unsigned long address,
diff --git a/mm/memory.c b/mm/memory.c
index 29edd91..ddcf979 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3826,8 +3826,8 @@ static int __follow_pte_pmd(struct mm_struct *mm, unsigned long address,
 	return -EINVAL;
 }
 
-int follow_pte(struct mm_struct *mm, unsigned long address, pte_t **ptepp,
-	       spinlock_t **ptlp)
+static inline int follow_pte(struct mm_struct *mm, unsigned long address,
+			     pte_t **ptepp, spinlock_t **ptlp)
 {
 	int res;
 
-- 
2.7.4

  parent reply	other threads:[~2016-12-20 22:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-20 22:23 [PATCH 0/2] Write protect DAX PMDs in *sync path Ross Zwisler
2016-12-20 22:23 ` [PATCH 1/2] mm: add follow_pte_pmd() Ross Zwisler
2016-12-20 22:23 ` Ross Zwisler [this message]
2016-12-20 23:06   ` [PATCH 2/2] dax: wrprotect pmd_t in dax_mapping_entry_mkclean Dan Williams
2016-12-21  8:48   ` Jan Kara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1482272586-21177-3-git-send-email-ross.zwisler@linux.intel.com \
    --to=ross.zwisler@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=david@fromorbit.com \
    --cc=hch@lst.de \
    --cc=jack@suse.cz \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvdimm@ml01.01.org \
    --cc=mawilcox@microsoft.com \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).