From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751620AbcL1PRa (ORCPT ); Wed, 28 Dec 2016 10:17:30 -0500 Received: from mga03.intel.com ([134.134.136.65]:34774 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751031AbcL1PR2 (ORCPT ); Wed, 28 Dec 2016 10:17:28 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.33,422,1477983600"; d="scan'208";a="1087497401" Message-ID: <1482938241.9552.160.camel@linux.intel.com> Subject: Re: [PATCH v5 4/7] i2c: designware: introducing I2C_SLAVE definitions From: Andy Shevchenko To: Luis Oliveira , wsa@the-dreams.de, robh+dt@kernel.org, mark.rutland@arm.com, jarkko.nikula@linux.intel.com, mika.westerberg@linux.intel.com, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Ramiro.Oliveira@synopsys.com, Joao.Pinto@synopsys.com, CARLOS.PALMINHA@synopsys.com Date: Wed, 28 Dec 2016 17:17:21 +0200 In-Reply-To: <08964037b735ed646a5bd56e29c7922d6172a1dd.1482934380.git.lolivei@synopsys.com> References: <08964037b735ed646a5bd56e29c7922d6172a1dd.1482934380.git.lolivei@synopsys.com> Organization: Intel Finland Oy Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.22.3-1 Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, 2016-12-28 at 14:43 +0000, Luis Oliveira wrote: > - Definitions were added > > SLAVE related definitions were added to the core of the controller. > Reviewed-by: Andy Shevchenko > Signed-off-by: Luis Oliveira > --- > Changes V4->V5: (Andy Shevchenko) > - This patch just introduces SLAVE definitions (as suggested in V4) > >  drivers/i2c/busses/i2c-designware-core.h | 27 > +++++++++++++++++++++++++++ >  1 file changed, 27 insertions(+) > > diff --git a/drivers/i2c/busses/i2c-designware-core.h > b/drivers/i2c/busses/i2c-designware-core.h > index 8bba7a37c3ce..5080f1d2d2ec 100644 > --- a/drivers/i2c/busses/i2c-designware-core.h > +++ b/drivers/i2c/busses/i2c-designware-core.h > @@ -36,15 +36,20 @@ >  #define DW_IC_CON_SPEED_FAST 0x4 >  #define DW_IC_CON_SPEED_HIGH 0x6 >  #define DW_IC_CON_SPEED_MASK 0x6 > +#define DW_IC_CON_10BITADDR_SLAVE 0x8 >  #define DW_IC_CON_10BITADDR_MASTER 0x10 >  #define DW_IC_CON_RESTART_EN 0x20 >  #define DW_IC_CON_SLAVE_DISABLE 0x40 > +#define DW_IC_CON_STOP_DET_IFADDRESSED 0x80 > +#define DW_IC_CON_TX_EMPTY_CTRL 0x100 > +#define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL 0x200 >   >  /* >   * Registers offset >   */ >  #define DW_IC_CON 0x0 >  #define DW_IC_TAR 0x4 > +#define DW_IC_SAR 0x8 >  #define DW_IC_DATA_CMD 0x10 >  #define DW_IC_SS_SCL_HCNT 0x14 >  #define DW_IC_SS_SCL_LCNT 0x18 > @@ -75,6 +80,7 @@ >  #define DW_IC_SDA_HOLD 0x7c >  #define DW_IC_TX_ABRT_SOURCE 0x80 >  #define DW_IC_ENABLE_STATUS 0x9c > +#define DW_IC_CLR_RESTART_DET 0xa8 >  #define DW_IC_COMP_PARAM_1 0xf4 >  #define DW_IC_COMP_VERSION 0xf8 >  #define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A > @@ -93,15 +99,22 @@ >  #define DW_IC_INTR_STOP_DET 0x200 >  #define DW_IC_INTR_START_DET 0x400 >  #define DW_IC_INTR_GEN_CALL 0x800 > +#define DW_IC_INTR_RESTART_DET 0x1000 >   >  #define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | > \ >    DW_IC_INTR_TX_ABRT | \ >    DW_IC_INTR_STOP_DET) >  #define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MAS > K | \ >    DW_IC_INTR_TX_EMPTY) > +#define DW_IC_INTR_SLAVE_MASK (DW_IC_INTR_DEFAULT_MASK > | \ > +  DW_IC_INTR_RX_DONE | \ > +  DW_IC_INTR_RX_UNDER | \ > +  DW_IC_INTR_RD_REQ) > + >  #define DW_IC_STATUS_ACTIVITY 0x1 >  #define DW_IC_STATUS_TFE BIT(2) >  #define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) > +#define DW_IC_STATUS_SLAVE_ACTIVITY BIT(6) >   >  #define DW_IC_SDA_HOLD_RX_SHIFT 16 >  #define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, > DW_IC_SDA_HOLD_RX_SHIFT) > @@ -123,6 +136,12 @@ >  #define TIMEOUT 20 /* ms */ >   >  /* > + * operation modes > + */ > +#define DW_IC_MASTER 0 > +#define DW_IC_SLAVE 1 > + > +/* >   * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register >   * >   * only expected abort codes are listed here > @@ -139,6 +158,9 @@ >  #define ABRT_10B_RD_NORSTRT 10 >  #define ABRT_MASTER_DIS 11 >  #define ARB_LOST 12 > +#define ABRT_SLAVE_FLUSH_TXFIFO 13 > +#define ABRT_SLAVE_ARBLOST 14 > +#define ABRT_SLAVE_RD_INTX 15 >   >  #define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << > ABRT_7B_ADDR_NOACK) >  #define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << > ABRT_10ADDR1_NOACK) > @@ -151,6 +173,9 @@ >  #define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << > ABRT_10B_RD_NORSTRT) >  #define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) >  #define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) > +#define DW_IC_RX_ABRT_SLAVE_RD_INTX (1UL << > ABRT_SLAVE_RD_INTX) > +#define DW_IC_RX_ABRT_SLAVE_ARBLOST (1UL << > ABRT_SLAVE_ARBLOST) > +#define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO (1UL << > ABRT_SLAVE_FLUSH_TXFIFO) >   >  #define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOA > CK | \ >    DW_IC_TX_ABRT_10ADDR1_NOACK > | \ > @@ -206,6 +231,7 @@ struct dw_i2c_dev { >   void __iomem *base; >   struct completion cmd_complete; >   struct clk *clk; > + struct i2c_client *slave; >   u32 (*get_clk_rate_khz) (struct > dw_i2c_dev *dev); >   struct dw_pci_controller *controller; >   int cmd_err; > @@ -225,6 +251,7 @@ struct dw_i2c_dev { >   struct i2c_adapter adapter; >   u32 functionality; >   u32 master_cfg; > + u32 slave_cfg; >   unsigned int tx_fifo_depth; >   unsigned int rx_fifo_depth; >   int rx_outstanding; -- Andy Shevchenko Intel Finland Oy