From: Steve Longerbeam <slongerbeam@gmail.com>
To: shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, linus.walleij@linaro.org,
gnurou@gmail.com, mchehab@kernel.org, gregkh@linuxfoundation.org,
p.zabel@pengutronix.de
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-media@vger.kernel.org, devel@driverdev.osuosl.org,
Steve Longerbeam <steve_longerbeam@mentor.com>
Subject: [PATCH 00/20] i.MX Media Driver
Date: Thu, 29 Dec 2016 14:27:15 -0800 [thread overview]
Message-ID: <1483050455-10683-1-git-send-email-steve_longerbeam@mentor.com> (raw)
This is a media driver for video capture on i.MX.
Refer to Documentation/media/v4l-drivers/imx.rst for example capture
pipelines on SabreSD, SabreAuto, and SabreLite reference platforms.
This patchset includes the OF graph layout as proposed by Philipp Zabel,
with only minor changes which are enumerated in the patch header.
Philipp Zabel (2):
ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their
connections
media: imx: Add video switch subdev driver
Steve Longerbeam (18):
ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
ARM: dts: imx6qdl: add media device
ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabreauto: create i2cmux for i2c3
ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
gpio: pca953x: Add optional reset gpio control
media: Add i.MX media core driver
media: imx: Add CSI subdev driver
media: imx: Add SMFC subdev driver
media: imx: Add IC subdev drivers
media: imx: Add Camera Interface subdev driver
media: imx: Add MIPI CSI-2 Receiver subdev driver
media: imx: Add MIPI CSI-2 OV5640 sensor subdev driver
media: imx: Add Parallel OV5642 sensor subdev driver
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
.../devicetree/bindings/gpio/gpio-pca953x.txt | 4 +
Documentation/devicetree/bindings/media/imx.txt | 205 +
Documentation/media/v4l-drivers/imx.rst | 429 ++
arch/arm/boot/dts/imx6dl-sabrelite.dts | 5 +
arch/arm/boot/dts/imx6dl-sabresd.dts | 5 +
arch/arm/boot/dts/imx6dl.dtsi | 183 +
arch/arm/boot/dts/imx6q-sabrelite.dts | 6 +
arch/arm/boot/dts/imx6q-sabresd.dts | 5 +
arch/arm/boot/dts/imx6q.dtsi | 123 +
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 142 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 122 +-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 114 +-
arch/arm/boot/dts/imx6qdl.dtsi | 25 +-
arch/arm/configs/imx_v6_v7_defconfig | 10 +-
drivers/gpio/gpio-pca953x.c | 17 +
drivers/staging/media/Kconfig | 2 +
drivers/staging/media/Makefile | 1 +
drivers/staging/media/imx/Kconfig | 36 +
drivers/staging/media/imx/Makefile | 16 +
drivers/staging/media/imx/TODO | 18 +
drivers/staging/media/imx/imx-camif.c | 1011 +++++
drivers/staging/media/imx/imx-csi.c | 638 +++
drivers/staging/media/imx/imx-ic-common.c | 113 +
drivers/staging/media/imx/imx-ic-pp.c | 636 +++
drivers/staging/media/imx/imx-ic-prpenc.c | 1037 +++++
drivers/staging/media/imx/imx-ic-prpvf.c | 1181 ++++++
drivers/staging/media/imx/imx-ic.h | 36 +
drivers/staging/media/imx/imx-media-common.c | 981 +++++
drivers/staging/media/imx/imx-media-dev.c | 479 +++
drivers/staging/media/imx/imx-media-fim.c | 508 +++
drivers/staging/media/imx/imx-media-internal-sd.c | 456 ++
drivers/staging/media/imx/imx-media-of.c | 291 ++
drivers/staging/media/imx/imx-media-of.h | 25 +
drivers/staging/media/imx/imx-media.h | 290 ++
drivers/staging/media/imx/imx-mipi-csi2.c | 509 +++
drivers/staging/media/imx/imx-smfc.c | 739 ++++
drivers/staging/media/imx/imx-video-switch.c | 349 ++
drivers/staging/media/imx/ov5640-mipi.c | 2349 +++++++++++
drivers/staging/media/imx/ov5642.c | 4364 ++++++++++++++++++++
include/media/imx.h | 15 +
include/uapi/Kbuild | 1 +
include/uapi/linux/v4l2-controls.h | 4 +
include/uapi/media/Kbuild | 2 +
include/uapi/media/imx.h | 30 +
44 files changed, 17484 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/imx.txt
create mode 100644 Documentation/media/v4l-drivers/imx.rst
create mode 100644 drivers/staging/media/imx/Kconfig
create mode 100644 drivers/staging/media/imx/Makefile
create mode 100644 drivers/staging/media/imx/TODO
create mode 100644 drivers/staging/media/imx/imx-camif.c
create mode 100644 drivers/staging/media/imx/imx-csi.c
create mode 100644 drivers/staging/media/imx/imx-ic-common.c
create mode 100644 drivers/staging/media/imx/imx-ic-pp.c
create mode 100644 drivers/staging/media/imx/imx-ic-prpenc.c
create mode 100644 drivers/staging/media/imx/imx-ic-prpvf.c
create mode 100644 drivers/staging/media/imx/imx-ic.h
create mode 100644 drivers/staging/media/imx/imx-media-common.c
create mode 100644 drivers/staging/media/imx/imx-media-dev.c
create mode 100644 drivers/staging/media/imx/imx-media-fim.c
create mode 100644 drivers/staging/media/imx/imx-media-internal-sd.c
create mode 100644 drivers/staging/media/imx/imx-media-of.c
create mode 100644 drivers/staging/media/imx/imx-media-of.h
create mode 100644 drivers/staging/media/imx/imx-media.h
create mode 100644 drivers/staging/media/imx/imx-mipi-csi2.c
create mode 100644 drivers/staging/media/imx/imx-smfc.c
create mode 100644 drivers/staging/media/imx/imx-video-switch.c
create mode 100644 drivers/staging/media/imx/ov5640-mipi.c
create mode 100644 drivers/staging/media/imx/ov5642.c
create mode 100644 include/media/imx.h
create mode 100644 include/uapi/media/Kbuild
create mode 100644 include/uapi/media/imx.h
--
2.7.4
next reply other threads:[~2016-12-29 22:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-29 22:27 Steve Longerbeam [this message]
2016-12-29 22:27 ` [PATCH 01/20] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2016-12-29 22:27 ` [PATCH 02/20] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections Steve Longerbeam
2016-12-29 22:27 ` [PATCH 03/20] ARM: dts: imx6qdl: add media device Steve Longerbeam
2016-12-29 22:27 ` [PATCH 04/20] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2016-12-29 22:27 ` [PATCH 05/20] ARM: dts: imx6-sabresd: " Steve Longerbeam
2016-12-29 22:27 ` [PATCH 06/20] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2016-12-29 22:27 ` [PATCH 07/20] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2016-12-29 22:27 ` [PATCH 08/20] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2016-12-29 22:27 ` [PATCH 09/20] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2016-12-29 22:27 ` [PATCH 10/20] gpio: pca953x: Add optional reset gpio control Steve Longerbeam
2016-12-30 7:06 ` Lothar Waßmann
2016-12-30 13:17 ` Linus Walleij
2016-12-30 18:03 ` Steve Longerbeam
2016-12-29 22:27 ` [PATCH 11/20] media: Add i.MX media core driver Steve Longerbeam
2017-01-03 21:17 ` Rob Herring
2016-12-29 22:27 ` [PATCH 12/20] media: imx: Add CSI subdev driver Steve Longerbeam
2016-12-29 22:27 ` [PATCH 13/20] media: imx: Add SMFC " Steve Longerbeam
2016-12-29 22:27 ` [PATCH 14/20] media: imx: Add IC subdev drivers Steve Longerbeam
2016-12-29 22:27 ` [PATCH 15/20] media: imx: Add Camera Interface subdev driver Steve Longerbeam
2016-12-29 22:27 ` [PATCH 16/20] media: imx: Add MIPI CSI-2 Receiver " Steve Longerbeam
2016-12-29 22:27 ` [PATCH 17/20] media: imx: Add video switch " Steve Longerbeam
2016-12-29 22:27 ` [PATCH 18/20] media: imx: Add MIPI CSI-2 OV5640 sensor " Steve Longerbeam
2016-12-29 22:27 ` [PATCH 19/20] media: imx: Add Parallel OV5642 " Steve Longerbeam
2016-12-29 22:27 ` [PATCH 20/20] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Steve Longerbeam
2017-01-02 21:09 ` [PATCH 00/20] i.MX Media Driver Fabio Estevam
2017-01-03 20:50 ` Steve Longerbeam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483050455-10683-1-git-send-email-steve_longerbeam@mentor.com \
--to=slongerbeam@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=gnurou@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=steve_longerbeam@mentor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).